ICP DAS USA ET-2242 User manual

P1
(P)ET-2242 Series Quick Start
v1.2, May 2023
Packing List
In addition to this guide, the package includes the following items:
(P)ET-2242 / (P)ET-2242-32 X 1 Quick Start x1
Technical Support
[e-mail]
www.icpdas.com
Resources
How to search for drivers, manuals and
spec information on ICP DAS website.
For Mobile Web
For Desktop Web
Model Name
Model Name

P2
Power Supply
ET-2242 : +10 to +30 VDC
PET-2242/(P)ET-2242-32 : +10 to +48 VDC
Uses Non-PoE
Switch
Host PC
Hub/Switch(NS-205)
Ethernet Cable
1 Connecting the Power and Host PC
1) Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall
first, else the “Search Servers” on Chapter 3 may not work. (Please
contact with your system Administrator)
2) Connect both the (P)ET-2242 and your PC to the same sub network or
the same Ethernet switch.
3) Supply power (PoE or +10 to +48 VDC)to the (P)ET-2242.。
Note: Please use the first RJ-45 jack (ETH1) to connect the PoE Switch
for powering through PoE.The second RJ-45 jack (ETH2)
doesn’t support the PoE function.
Host PC
PoE Switch(NS-205PSE)
Ethernet Cable
Power over Ethernet
Uses PoE
Switch

P3
2 Wiring the DI and DO for Self-test
A tip for insert/remove the wire to the connector.
1) Connect a LED between the DO0 and E.PWR.
2) Connect the External Power +24V to the E.PWR.
3) Connect the External Power GND to the E.GND.
2. While holding the
screwdriver in place,
insert/remove the wire into
the terminal block.
1. Use the blade of the
flat-head screwdriver to
push down the wire
clamp.
Continue holding the
screwdriver in place
Insert/remove the wire
Power Supply
(e.g.: MDR-20-24)
+Vs
GND
LED
R

P4
3 Configuring Network Settings
1) Run the eSearch Utility.
eSearch Utility download link:
https://www.icpdas.com/en/download/index.php?nation=US&kind1=&mo
del=&kw=esearch
2) Click the “Search Servers”to search your (P)ET-2242.
3) Double-click your (P)ET-2242 to configure the settings.
Factory Default Settings of (P)ET-2242:
IP Address
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1
4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click “OK”. Note: The (P)ET-2242 will use the new settings 2
seconds later .





P5
4 Testing your Ethernet I/O Module
1) Click “Search Servers” button again to ensure the (P)ET-2242 is working
well with new configuration, than click the name of (P)ET-2242 to select
it.。
2) Click the “Web” button to log in to the web configuration pages.(Or enter
the URL address of the (P)ET-2242 in the address bar of the browser.)
3) For the first time using the module, you have to change the password and click
the “Submit“ button.
4) Enter the new password in the “Login password”field and click the
“Submit “button.
Authentication
Defaults
Password
Admin

P6
5) The “Home” page allows for a simple test to verify the Digital Output
functionality.
6) In the “Digital I/O” section, click the “DO0” button to turn it ON (Red).
7) Verify that the output LED status is “ON”.


ON
