Air King FRAK110 User manual

For more information about the Fire Rated Exhaust Fans Series
or Air King’s complete line of Exhaust Fans, Range Hoods, and
Building Products, visit the Air King web site at
www.airkinglimited.com or contact your local sales representative.
United States: West Chester, PA • 877-304-3785
Canada: Brampton, Ontario • 800-250-8767
www.airkinglimited.com
December 2008
Advantage 3" Duct Fire Rated Exhaust Fan Series The Advantage 3" Duct Fire
Rated Exhaust Fan Series is
an economical solution
when a Ceiling Radiation
Damper is required.
• Grill: Cold rolled steel, powder coated white. • Blower Wheel: One piece polymeric wheel, 41/2" diameter, 1"
wide, with 10 blades.
• Motor: Single coil plug-in, two pole motor, life time lubrication,
thermally protected.
• Fan Housing: 24 gauge galvanized steel housing. • Duct Collar: Metal collar for 3" duct connection, comes
complete with built in back draft damper.
• Unit Mounting: Unit is centered between joists (with 16"
centers) using hanging brackets. The housing will mount through drywall thickness up to 3/4".
• Damper:
Blanket - Non-asbestos, ceramic blanket Fusible Link - Replaceable, 165°F standard
Classification - C.U.L. listed 555C. California State Marshall classification for 1 or 2 hour fire damper rating. California State Marshall listing number 3225-1374-101.
• Availability: Single Packs or sold in Contractor Packs of 6
(Housing, Damper, Motor/Blade/Grill).
CUS
Air King Ventilation Products certifies that the models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the Certified Ratings Program.
Join Air King in the future of Ventilation! FRB-1
CFM/Sones HVI
Model Motor Housing Damper @ PS.1 WG RPM Sones
FRAS50 FA50T AKFH1 AKFD1 47/4.0 2250 3.0 FRAS60 FA60T AKFH1 AKFD1 60/5.7 2500 4.5 FRAS70 FA70T AKFH1 AKFD1 66/6.9 2750 5.0
Specifications subject to change without notice. Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The loudness ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal does not apply to HVI Sones.

What is a Fire Rated Exhaust Fan? The Air King Fire Rated Exhaust Fan Series consists of a three part system designed to meet the NFPA’s (National Fire Protection Association) Standard 90A. The unit consists of a Housing, a Ceiling Radiation Damper, and the Motor/Blade/Grill. When all three of these parts are used together they create a Fire Rated Exhaust Fan. What does a Fire Rated Exhaust Fan Do? The Fire Rated Exhaust Fan Series is designed to automatically shut off and seal the duct from the rest of the dwelling once the temperature of air passing through the damper exceeds that of the fusible link. This prevents the spread of smoke or fire through the ducting system to the other rooms or dwellings. Why do I need a Fire Rated Exhaust Fan? Your local code will dictate if and what type of Fire Rated Exhaust Fan you will need. Generally any time a common duct is used in a multi-dwelling situation, a Fire Rated Exhaust Fan will be required to prevent fire from using the common ducting to spread from one dwelling to the next. This is usually true in commercial and multi-family housing constructions.
Deluxe Quiet Fire Rated Exhaust Fan Series The Deluxe Quiet Fire
Rated Exhaust Fan Series
Series combines style
and quiet operation with
a Ceiling Radiation Damper.
• Grill: Cold rolled steel, powder coated white. • Blower Wheel: One piece polymeric centrifugal blower wheel,
57/32" diameter, 229/32" wide, with 30 blades.
• Motor: Heavy duty, permanently split capacitor, 4 pole motor,
life time lubrication, thermally protected.
• Fan Housing: 24 gauge galvanized steel housing. • Duct Collar: Metal collar for 4" duct connection, comes
complete with built in back draft damper.
• Unit Mounting: Unit is centered between joists (with 16"
centers) using hanging brackets. The housing will mount through drywall thickness up to 3/4".
• Damper:
Blanket - Non-asbestos, ceramic blanket Fusible Link - Replaceable, 165°F standard
Classification - C.U.L. listed 555C. California State Marshall classification for 1 or 2 hour fire damper rating. California State Marshall listing number 3225-1374-101.
• Availability: Single Packs or sold in Contractor Packs of 4
(Housing, Damper, Motor/Blade/Grill).
CUS
Air King Ventilation Products certifies that the models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the Certified Ratings Program.
CFM/Sones HVI
Model Motor Housing Damper @ PS.1 WG RPM Sones
FRAK80 FAK80T AKFH2 AKFD2 80/2.6 1250 1.5 FRAK90 FAK90T AKFH2 AKFD2 90/2.9 1250 2.0 FRAK110 FAK110T AKFH2 AKFD2 110/3.5 1250 2.5 FRAK130 FAK130T AKFH2 AKFD2 120/3.6 1250 3.0
Specifications subject to change without notice.
Advantage 4" Duct Fire Rated Exhaust Fan Series The Advantage 4" Duct
Fire Rated Exhaust Fan
Series combines high
performance with a
Ceiling Radiation Damper.
• Grill: Cold rolled steel, powder coated white. • Blower Wheel: One piece polymeric wheel, 57/32" diameter,
23/8" wide, with 48 blades.
• Motor: Heavy duty, plug-in, permanently split capacitor, 4 pole
motor, life time lubrication, thermally protected.
• Fan Housing: 24 gauge galvanized steel housing. • Duct Collar: Metal collar for 4" duct connection, comes
complete with built in back draft damper.
• Unit Mounting: Unit is centered between joists (with 16"
centers) using hanging brackets. The housing will mount through drywall thickness up to 3/4".
• Damper:
Blanket - Non-asbestos, ceramic blanket Fusible Link - Replaceable, 165°F standard Classification - C.U.L. listed 555C. California State Marshall classification for 1 or 2 hour fire damper rating. California State Marshall listing number 3225-1374-101.
• Availability: Single Packs or sold in Contractor Packs of 4
(Housing, Damper, Motor/Blade/Grill).
CUS
Air King Ventilation Products certifies that the models shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the Certified Ratings Program.
Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The loudness ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal does not apply to HVI Sones.
CFM/Sones HVI
Model Motor Housing Damper @ PS.1 WG RPM Sones
FRAS90 FA90T AKFH2 AKFD2 90/3.1 1250 2.5 FRAS120 FA120T AKFH2 AKFD2 120/3.7 1300 3.0
Specifications subject to change without notice. Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The loudness ratings shown are loudness values in fan sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal does not apply to HVI Sones.