Air Vuisa PASSENGER User manual

PASSENGER User manual
Ver 1.0/April 2019.

2 | Page
Dear customer,
Thank you for purchasing an AIR VUISA quality product.
We are a growing family of professionals with the aim of producing high quality
products for a wide spectrum of pilots. Incorporating modern technologies and
highest quality materials, our goal is to manufacture durable paragliding products,
with excellent performances but with safety as our highest priority.
We strongly recommend that you carefully read this manual, for it contains vital
information for proper and safe operation of our product, as well as maintenance
and operating instructions.
This manual is an integral part of this harness system, so please pass it on to the
future owner if you wish to sell it one day.
We wish you all the best in your future flying adventures,
AIR VUISA team

3 | Page
Contents:
PASSENGER harness introduction……………………………………………………………….…….4
Technical specifications………………………………………………………………….…………………5
Harness overview……………………………………………………………………………….…………….6
Components ………………………………………………………………………………………….…………6
Safety Information…………………………………………………………………………………………...9
Harness Setup and Assembly…………………….…………………………………………..……….10
Seatboard and Back Protector Installation…………………….….….………………………..10
Harness adjustment ……………………………………………………………………………………….11
Maintenance ………………………………………………………………………………………………….13
Final notes ……………………………………………………………………………………………………. 15

4 | Page
The PASSENGER - Professional tandem harness
Developed in close cooperation with professional tandem pilots, The AIR VUISA
Passenger along with the SKIPPER is the ultimate professional tandem pilot’s duo
- specially designed to accommodate the demanding requests of tandem pilots.
After various prototypes, testing and feedback from professional tandem pilots
worldwide, we were able to produce a practical, simple, light and durable but also
comfortable and safe harness for the passenger.

5 | Page
Some highlights of the AIRVUISA Passenger harness:
•Easy strap in buckles;
•Easy for the passenger to get into and sit in, without the help of the pilot
thanks to the combination of well solved get-in straps, balanced center of
gravity and special handles for the passenger to pull himself into the
harness and hold on to, helping the pilot to concentrate on the flight –
especially in the critical takeoff phase;
•Excellent foam back protection, shaped to adapt to the pilot harness;
•Lightness, thanks to the combination of durable, yet light materials.
Technical specifications:
SKIPPER
Pilot height
160-190 cm
Max Load
120 kg
Weight*
3200 g
Use
Paragliding only
Back height
73 cm
Leaning setting height
40 cm
Seat length
30 cm
Seat width
33 cm
Carabiners height
42 cm
Impact damping system: Airbag (Volume)
No
Impact damping system: Foam Protector (Thickness)
Yes / 12 cm
Homologation
/
Flight: tandem (Pilot- Passenger)
Passenger
Flight: acrobatic flying
No
Take-off: Winching
No
Quick-out carabiners compatibility
No
*without carabiners

6 | Page
Harness Overview and Components
The AIR VUISA PASSENGER harness is consisted of the following key elements:
(Harness) (Foam Back Protector) (Wooden Seat Plate)
•We recommend the use of Austrialpin 45mm carabiners as this harness was
designed with these particular biners in mind.

7 | Page

8 | Page

9 | Page
Safety information
•WARNING - The AIR VUISA PASSENGER paragliding harness is
designed and tested exclusively for paragliding use.
•Every pilot bears sole responsibility for his/her personal safety when
paragliding. Neither the manufacturer nor the seller can guarantee
or be held responsible for the safety of the pilot or his passenger.
The use of this harness system is entirely at your own risk.
•All parts of the equipment should be checked before every flight,
including a thorough pre-flight check – especially including:
oHarness and carabiners integrity;
oRescue parachute pocket to be properly closed with its handle
securely in place;
oHarness adjustments have not changed;
oConnection risers / harness as well as the self-locking
carabiners are locked and secured;
•It is of utmost importance to check the harness and reserve
compatibility by a qualified person and to do a test deployment.
•Maximum Pilot weight – 120KG.
•All harness adjustments must be made prior the first flight during a
hang-test session. It is of utmost importance to adopt a proper flying
posture, check all basic adjustments and ensure you have easy
access to in-flight adjustments.

10 | Page
Harness Setup and Assembly
Seatboard and Protector Removal and Installation
Pictures 1-3 demonstrate seatboard and back-protector removal and installation.
Seatboard and protector are easily accessible – when lifting the back end of the
seat you will find the ends of the leg straps holding the board. The back protector
is easily removable by opening the harness as shown in the pictures below: