Airgineers VR02 User manual
VR02 FPV Goggle
Instructions
Contents What is in the box
Goggle Specifi cations 3
Operating Instructions 5
Band and Channel Selection 6
Frequency Sweep Function 7
Fast Frequency Search Function 8
1 BETAFPV VR02 FPV Goggles
2 Adjustable Headband
1
2
Airginners VR02 FPV goggles manual version 1.0 2022 3
Goggle Speci cations
VR02 FPV Goggles - the First-Person-View
Goggle with simple operation and powerful
function, specially designed for FPV starters.
With the built-in antennas and structure patented design, the VR02
Goggles are compact and lightweight, weighing less than 300g they
are comfortable to wear and carry.
VR02 goggles come with built-in 5.8G 14DBI high-quality antennas,
you can receive stable and clear images even for long-range ights.
With 4.3 inches 800*480px HD high brightness LCD, the Goggles
provide you with a clear image of the camera view. They are
specially designed for FPV racing or model aircraft.
The frequency sweep function and the fast frequency auto-search
function (only 2.5 seconds), allow pilots to easily nd a band and
channel with a stronger signal for a better ight experience.
The advanced auto-searching function will show you the working
frequency on the screen clearly.
The Goggles have an ergonomic design with a foam sponge
faceplate and a three-sided adjustable headband, designed
to t your face and head perfectly.
PART SPECIFICATION
BODY
• Dimensions: 126 x 143 x 86.3mm
• Weight: 300g, with 2hr 2000mAh battery
• Three-Way adjustable headband
SCREEN
• Screen size: 4.3 inch
• Screen resolution: 800*480 px
• Screen brightness: 300cd/m2
• View Angle: 55°
JACK
• Type-C Charging
• Current: 500mA
BATTERY
Built-in 3.7V/2000mAh high-capacity polymer battery,
The charging indicator LED will turn on while charging.
When charging is completed, the LED will turn o .
Each full charge takes 2 hours working time.
4Airginners VR02 FPV goggles manual version 1.0 2022
Goggle Specications
With the built-in antennas and the special design of the Goggles lens, the VR02 Goggles
are compact with a small, lightweight body.
1
3
2
14.3 inches LCD 2Concave Mirror 3Beam Splitter
Airginners VR02 FPV goggles manual version 1.0 2022 5
Operating Instructions
BUTTON INSTRUCTION
Power On/O
Slide the switch to the right to switch On, and
to the left to switch O. The screen will light up
after a normal boot.
Band+ Short press for Band+ option A, B, E, F, R, L cycle
selection.
Search
After powering on, short press the “S” button to
enter the sweeping interface. Press and hold the
“S” button for 1 second to start the frequency
auto-search. Short press the “S” button again,
to return to the camera view screen display.
CH+ Short press for CH 1~8 cycles.
Power On/O
CH+
Search
Band+
Charging Indicator
Type-C Charging Port
6Airginners VR02 FPV goggles manual version 1.0 2022
Band and Channel Selection
CH CH 1
(MHz)
CH 2
(MHz)
CH 3
(MHz)
CH 4
(MHz)
CH 5
(MHz)
CH 6
(MHz)
CH 7
(MHz)
CH 8
(MHz)
GROUP
A 5865 5845 5825 5805 5785 5765 5745 5725
B 5733 5752 5771 5790 5809 5828 5847 5866
E 5705 5685 5665 5645 5885 5905 5925 5945
F 5740 5760 5780 5800 5820 5840 5860 5880
R 5658 5695 5732 5769 5806 5843 5880 5917
L 5362 5399 5436 5473 5510 5547 5584 5621
– The VR02 FPV Goggles have a frequency sweep function and a fast frequency auto-search function, these help pilots nd a stronger
frequency Band, to get a better ight experience.
– The frequency sweep function can display the occupancy status of each channel in the current space, so that pilots can y with a better
frequency Band and enhance the ight experience.
Airginners VR02 FPV goggles manual version 1.0 2022 7
Frequency Sweep Function
How to use the frequency sweep function?
After powering on, short press the “S” button to enter the sweeping interface, as shown below. Pilots can change the frequency Band via the
“Band+” and “Ch+” buttons. Short press the “S” button again, to return to the camera view screen display.
Green 0<RSSI<20, not occupied
Yellow 20<RSSI<70, there is a drone occupying the Band
far away, or there is interference
Red 70<RSSI<99, occupied
White Current Band (highest RSSI in the sweep result)
8Airginners VR02 FPV goggles manual version 1.0 2022
Fast Frequency
Search Function
How to use the fast frequency search function?
After powering on, press and hold the “S” button for 1 second to start the frequency auto-search. The frequency auto-search process is 2.5
seconds. After the frequency auto-search is over, it will beep twice and jump to the corresponding frequency Band of the drone.
Table of contents
