Package Contents
lOne 5-Port 10/100M Ethernet Switch
lOne AC Power Adapter
lOne Quick Installation Guide
Congratulations on your purchase of the 5-Port 10/100M Mini Switch.
This switch integrates 100Mbps Fast Ethernet and 10Mbps Ethernet
networkcapabilitiesinahighlyflexibleminipackage.
P/N:1907MSW105+7050
Ports 1-5At the rear site of the Switch, ports 1-5 are where you will
connectyourComputerstotheSwitch
Power At the left site of the Switch, the power port is where you
will connect the AC power adapter. Be sure to only use
theACpoweradapterthatcamewiththeSwitch.
The 5UTP/STP ports supportautomatic
MDI/MDIXcrossoverdetectionfunction
givestrue‘plugandplay’capability, with
theAuto-MDI function, you just need to
plug-inthenetworkcabletotheswitch
directlyandnoneedtocareiftheendnodeisNIC(NetworkInterface
Card)orswitchesandhubs.
ConnecttheSwitch’sACpoweradaptertotheSwitch’s
Power port. Plug the other end of the adapter into anAC
outlet.WhenconnectedtheACpoweradaptertothe
switch’sPowerportandACoutletwillimmediately
poweronthisSwitch.
WhentheSwitchinstallationwascompleted,checkontheLED
indicatorsforthestatus.
POWERThis indicator lights green when the switch isreceiving
power.
Link/ACT This indicator light green when the port is connected to a
station,iftheindicatorblinkingwillbetransmittingor
received dataon thenetwork.
Standards IEEE802.310BASE-T
IEEE802.3u100BASE-TX
IEEE802.3xFull-duplex flowcontrol
Ports 5xUTP/STPAuto-MDIX ports
Transfer Rate Ethernet10Mbps/20Mbps
Fast Ethernet100Mbps/200Mbps
Performance Non-blocking fullwire speed
Power 7.5VDC/1A
EMI FCCClassB/CEMarkB/VCCI-B