Airlinkplus ASW108 User manual

Package Contents
lOne 8-Port 10/100M Ethernet Switch
lOne AC Power Adapter
lOne Quick Installation Guide
Congratulations on your purchase of the 8-Port 10/100M
Mini Switch. This switch integrates 100Mbps Fast Ethernet
and 10Mbps Ethernet network capabilities in a highly
flexible mini package.
P/N:1907MSW108+7050
Ports 1-8At the rear site of the Switch, ports 1-8 are
where you will connect your Computers to
the Switch
Power At the left site of the Switch, the power port
is where you will connect the AC power
adapter. Be sure to only use the AC power
adapter that came with the Switch.
The 8UTP/STP ports support
automatic MDI/MDIX crossover
detection function gives true ‘plug
and play’ capability, with the
Auto-MDI function, you just need to plug-in the network
cable to the switch directly and no need to care if the end
node is NIC (Network Interface Card) or switches and hubs.
Connect the Switch’s AC power adapter to the Switch’s
Power port. Plug the other end of the adapter
into an AC outlet. When connected the AC
power adapter to the switch’s Power port and
AC outlet will immediately power on this
Switch.
When the Switch installation was completed, check on the
LED indicators for the status.
POWERThis indicator lights green when the switch is
receiving power.
Link/ACT This indicator light green when the port is
connected to a station, if the indicator
blinking will be transmitting or received data
on the network.
Standards IEEE 802.3 10BASE-T
IEEE 802.3u100BASE-TX
IEEE 802.3x Full-duplex flow control
Ports 8x UTP/STP Auto-MDIX ports
Transfer Rate Ethernet 10Mbps/20Mbps
Fast Ethernet 100Mbps/200Mbps
Performance Non-blocking full wire speed
Power 7.5VDC/1A
EMI FCC Class B/CE Mark B/VCCI-B