airquee 2 Part Energy Assault Course Operating instructions

Version 1.0 09/08/17
Page 1of 4
2 Part Energy Assault Course
(with light pocket)
IMPORTANT
AS OWNER/OPERATOR IT IS YOUR RESPONSIBILITY TO WRITE AND CARRY OUT
YOUR OWN RISK ASSESSMENT BEFORE ATTEMPTING TO USE THIS PRODUCT.
Site survey:
1. Carry out a survey of the area where the 2 Part Energy Assault Course will be
located, and check for any overhead/underground cables. It’s important that this is
carried out to avoid ground anchors penetrating underground services, and the 2
Part Energy Assault Course coming into contact with overhead cables when
inflated.
2. You should provide an adequate power supply to the fan, this should adhere to
your local power regulations.
3. Check wind speed: The industry recommends a maximum wind speed of Force 5
on the Beaufort scale of 28 - 38 kmph (19-24 mph). Force 5 is a fresh breeze when
small trees in leaf begin to sway.

Page 2of 4
3X
Included with your 2 Part Energy Assault Course:
Extra equipment needed in addition what is supplied with your inflatable:
•Suitable 240v Power Supply to operate the fan
CAUTION! Precautions should be taken during handling and use
to prevent electric shock. The blower requires a Ground Fault
Protected Circuit (GFCI). Please read the manufacturer’s
Instruction Manual before using the blower(s).
Extra equipment you could consider for your new inflatable:
•Ground sheet to protect the underside of your inflatable
•Sandbag covers to anchor your inflatable indoors
•Sack truck to move your inflatable safely
•RCD to attach to your extension lead
•Crash Mats
This inflatable can be set up and packed away by 3 persons who have
had proper manual handling training and use the correct equipment to
move the inflatable.
Intended use of the product: Intended user height and number:
For information regarding dimensions and weight,
please refer to the email sent to you with the finished
pictures link.
The inflatable
in its bag Anchor Pegs Land Operation Manual Repair Kit
User Height: UP to
1M
1.25M
1.5M
1.8M+
Number of Users
12
12
12
10
The purpose of this obstacle
course is to run through it,
overcoming its challenges and
difficulties as quickly as possible.
X16

Page 3of 4
Number and location of the anchor points:
Set up:
- Search for the zip covered with a Velcro flap on
the top of the unit.
- Unzip both zips and insert the light in the clear
PVC pocket.
- Please make sure to close both interior zips.
This way the cable won’t be able to unplug itself
when the unit is getting inflated.
16 GROUND ANCHOR
POINTS IN TOTAL
NO HIGH-LEVEL
ANCHOR POINTS
ZIP FOR ACCESSING
THE LIGHT POCKET
WIRING HARNESS
CONNECTION

Page 4of 4
IMPORTANT:
•When inflated, the air pressure will prevent ingress of water into the unit but it cannot be
guaranteed to stop all water reaching the electrical parts. Therefore, we do not recommend
operating the unit in the rain.
•When the dome is deflated the lights and speaker should be removed as soon as possible
and stored safely. The wiring harness should be left in place and the unit should be rolled to
prevent water lying on the unit and seeping into the sockets. If you suspect water has
entered any of the electrical components they should not be used until completely dry and
tested. We recommend taking professional advice where necessary.
•All cables and electrical equipment must be tested in accordance with the regulations of
your country. You must ensure all items are CE marked.
•In accordance with HSE guidelines all 240v equipment should be protected with an RCD
having a maximum trip current of 30 mA.
Airquee reserves the right to change the content of this manual without a prior notice to the customer.
All the pictures and drawings are for illustration purposes only.
ENJOY AND HAVE FUN!