Aiwa Pro Enigma MI-X450 User manual

User Manual
MI-X450 Pro Enigma
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com

- MI-X450 Pro Enigma Speaker
- Remote Control
- Microphone
- DC15V 1.6A Charger
- 3.5mm Audio Cable
- Apple Audio Cable
- Android Audio Cable
- User’s Manual
Please refrain from using any damaged components.
Contact your local authorized AIWA distributor/customer service
should you need any assistance.
Unboxing

Model Number: MI-X450 Pro Enigma
BT Version: V5.0
IP Rating: -
RMS Output: 120W
Frequency Response: 50~15kHz
S/N Ratio: ≥ 70dB
Distortion THD: ≤ 10%
Sensitivity: 95dB + 3dB
Supports: TF Card, USB,
Supported Profiles: MP3, WAV, APE, FLAC, WMA
Transmission Distance (Estimated): 10 Meters (No Obstacles)
Battery Capacity: 22500mAh
Playback Time: 3 – 8 Hours (Depends on Volume)
Charging Time: 4 - 5 Hours
The above are estimated values tested in a practical environment and may
vary upon individual usage habits.
Product Specifications

Product Overview
Volume Knob
Next Track
Play/Pause
Sound Mode:
Indoor/ Outdoor
Previous Track USB Port
Reset Hole
Volume Knob
Charging Port

Product Overview

Product Overview
Live Broadcast Function Effect
Live Broadcast Function Effect
Record (Record only when USB/TF
Card is inserted)
Keypad (Number 0-9)
For double-digit numbers, press both
numbers at the same time for two (2)
seconds. (For e.g, pressing 1 & 0
together will give you 10)

Product Overview
Microphone
LED Indicator Light
Display Screen: Displays battery level & Current
Frequency
Power Button: Long press to Power ON/OFF, Short
press to toggle between LED Lighting effects
(Blinking, Constant Illumination)
Pairing Button: Click button after turning the
microphone ON to enter pairing mode (The
Microphone’s display screen will start flashing). Turn
speaker ON now to commence pairing. Click button
to exit pairing mode.
Transmission Antenna (Please refrain from holding
this area during usage)

Product Usage Guide
Power ON/OFF:
Long press power button
Music Control:
Play/Pause: Click once (1)
Next Song: Click once (1)
Previous Song: Click once (1)
Assorted Functions:
Record: Insert TF card/ USB into the designated port. Please make sure
Microphone is connected. Short press the record button to start/stop
recording. (Supports recording accompaniment soundtrack + Microphone
input)
Play Recorded Tracks: Long press
Delete Recorded Files: Long press during selected music playback.
(Deletes current music playback from recorded files)
Change Playback Mode: Short press power button to switch between
BT/AUX/USB/TF card playback
AUX Playback Mode: Insert AUX cable and connect it to audio source to start.
TF Card Playback Mode: Insert TF card into TF port.
USB: Insert USB into the USB Port.
Sound field switch: Click to cycle between Original-Professional-Popu-
lar-Echo sound field profile.
*Original: PYOF, Professional: POPF, Echo:OYIg, Popular:YEUY
Microphone Delay: Works with all sound field modes except original mode.
Microphone Echo: Works with all sound field modes except original mode.

Special Effects: Users can play special effects through the remote control.
Microphone Priority: Press the mic priority button on the remote control
first.
Accompaniment: Press the accompany button on the remote control/
Accompany button on the speaker.
EQ: Double press the play button to cycle between (INDOOR/OUTDOOR
SOUND PROFILES)
Monitor/Earphone Function: Simple plug in your earphones/headphones
into the monitor port. The speaker will now be muted. Long press the sound
field button to un-mute speaker. (Playback will commence in both speaker
and earphones/headphones.
Perform Factory Reset:
Insert needle into reset button until the speaker powers down.

Connecting the Product
Paired device
Pairable devices
AIWA Enigma
AIWA Enigma
ON/OFF ON/OFF
Paired device
Pairable devices
1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on the speaker.
3. Search and connect to “AIWA Enigma” from your mobile device
4. Press and hold both Next track button & Previous track button together to
disconnect.

TWS Function
Power ON/OFF:
Turn on Both speakers. *LED Screen flashes on both units
Choose one of the units to function as the “Main unit”, long press
“Play” button on this unit and it will enter TWS pairing mode. *LED
Screen flashes
*Main unit LED screen flashing slowly + LED screen lights up
without flashing indicates successful pairing of both speakers
Turn on Bluetooth (BT) on your mobile device
Search and connect to “AIWA Enigma” from your mobile device
Playback should now commence via both speaker units at the
same time.
Long press “Play” button to disable TWS pairing. *LED Screen
1.
2.
3.
4.
5.
6.
7.

Battery & Charging
Charging the speaker:
Insert DC 5V adapter
*Red LED Light lights up
*Red LED Light extinguishes upon full charge
Approximate charging time: 4-5 Hours

Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com