AJAX ReX User manual
ReX User manual
Updated
June 16, 2021
ReX
The extender is compatible only with the
! Connection to
and
is not provided.
Ajax hubs
uartBridge
ocBridge
Plus
mobile application
Functional elements
Principle of operation
Buy range extender ReX
1.
2.
3.
4.
5.
6.
The number of connected ReX
Hub
1 ReX
Hub Plus
up to 5 ReX
Hub 2
up to 5 ReX
Hub 2 Plus
up to 5 ReX
website
Connection of ReX to the hub
Prior to initiating the connection:
Only users with administrator rights can add a device to the hub.
Connecting ReX to the hub:
1.
Ajax application
2.
3.
Ajax application
4.
5.
6.
1.
Add Device
2.
QR-code
3.
Add
4.
In order to assign a device to the extender:
ReX does not support pairing with
motion detector with visual alarm veri�cation
since the latter uses additional Wings radio protocol.
A device can only be paired with one ReX. When a device is assigned to a range extender it is
automatically disconnected from another connected range extender.
In order to assign a device to the hub:
1.
Go to the ReX settings (Devices → ReX → Settings
).
2.
Press
Pair with device
.
3.
Choose the devices that should operate via the extender.
4.
Go back to the ReX settings menu.
MotionCam
1.
Go to the ReX settings (Devices → ReX → Settings
).
ReX states
Parameter
Value
Jeweller Signal Strength
Signal strength between the hub and ReX
Connection
Connection status between the hub and the
extender
Battery Charge
Battery level of the device. Displayed as a
percentage
Lid
Tamper mode that reacts to an attempt to detach
or violate the integrity of the extender body
External power
Availability of external power
Temporary Deactivation
Shows the status of the device: active, completely
disabled by the user, or only noti�cations about
triggering of the device tamper button are
disabled
Firmware
ReX �rmware version
Device ID
Identi�er of the device
ReX settings
1.
Devices
2.
ReX
How battery charge is displayed in
Ajax apps
1.
Devices
First �eld
Device name, can be edited
Room
Selection of a virtual room that the device is
assigned to
LED Brightness
Adjusts the brightness of the logo light
Pair with device
Assignment of devices for the extender
Jeweller Signal Strength Test
Signal strength test between the extender and the
hub
Temporary Deactivation
Allows the user to disconnect the device without
removing it from the system.
Two options are available:
Note that the system will ignore only the disabled
device. Devices connected via ReX will continue
operating normally
User Guide
Opening ReX User Manual
Unpair device
Disconnecting the extender from the hub and
deleting its settings
Indication
Entirely
— the device will not execute system
commands or participate in automation
scenarios, and the system will ignore device
alarms and other noti�cations
Lid only
— the system will ignore only
noti�cations about the triggering of the device
tamper button
Learn more about temporary
deactivation of devices
Event
State of logo with LED indicator
Device is connected to the hub
Constantly lights white
Device lost connection with the hub
Constantly lights red
No external power
Blinks every 30 seconds
Functionality testing
The functionality testing of the associated to ReX devices will be added to the next updates
of OS Malevich.
Jeweller
Test
Device installation
Selection of the installation site
The device developed only for indoor use.
Check the signal strength at the installation site!
Installation procedure
Jeweller Signal Strength Test
Device mounting
It is strictly forbidden to disassemble the device connected to the power supply! Do not use
the device with a damaged power cable. Do not disassemble or modify ReX or its individual
parts — this may interfere with the normal operation of the device or lead to its failure.
1.
It is not recommended to use double-sided adhesive tape for installation. This can
result in ReX falling that can lead to malfunctioning of the device.
2.
3.
Maintenance of the device
Tech specs
The maximum number of devices connected to
ReX
When using with Hub — 99, Hub 2— 99, Hub Plus
— 149, Hub 2 Plus — 199
Max number of connected ReX per hub
Hub — 1, Hub 2 — 5, Hub Plus — 5, Hub 2 Plus — 5
Power supply
110~240 V AC, 50 / 60 Hz
Backup battery
Li-Ion 2 A⋅h (up to 35 hours of autonomous
operation)
Tamper protection
Available
3.
4.
How to replace ReX radio signal range extender battery
Radio signal range
Installation method
Indoors
Operating temperature range
From -10°С to +40°С
Operating humidity
Up to 75%
Overall dimensions
163 × 163 × 36 mm
Weight
330 g
Service life
10 years
Complete set
Warranty
Learn more
Compliance with standards
1.
2.
3.
4.
5.
Other manuals for ReX
2
Table of contents
Other AJAX Extender manuals
