
7
USING YOUR APPLIANCE
CHARGING THE APPLIANCE
FOR BEST RESULTS, FULLY CHARGE THE
UNIT BEFORE USE.
1. Connect one end of the included USB
cable into your computer or sound
device, and the other end into the
charging port of the earphones.
2. The red indicator light will turn on
when charging.
3. It takes approximately two hours for
the earphones to charge fully.
4. The red indicator will go out once the
earphones are fully charged.
Note: Your earphones cannot be used
while charging.
POWER ON/OFF
1. Power ON: Slide the power ON/OFF
switch to ON, the LED will flash blue
and red.
2. Power OFF: Slide the power ON/OFF
switch to the OFF position and the
headphones will turn off.
PAIRING TO YOUR SMARTPHONE
1. Press the Play/Pause button for
about 4 seconds, until the red and
blue indicator lights start flashing
alternately.
2. Turn on the Bluetooth Function on
your smartphone.
3. Search for Bluetooth devices and
select ‘A58040’.
4. Enter the code ‘0000’ if needed.
5. If pairing is successful, the blue
indicator light will start flashing.
Note: You need to pair the Bluetooth
Headphones to your smartphone for your
first use. After that, the earphones will
connect to your smartphone automatically
when they are switched on. Hold the Play/
Pause button for about 2-3 seconds until
the blue indicator light starts flashing to
connect the earphones to the smartphone
automatically.
The earphones can pair with two devices
at the same time. If you have an incoming
call, any music you are listening to
will stop automatically, allowing you to
answer the call.
ANSWERING A CALL (IPHONE)
1. Press the Play/Pause button on the
earphones.
2. Press the answer button on your
iPhone and check your iPhone call
menu. Look for the audio source and
select the headset ‘A58042’.
ANDROID USERS Samsung, HTC, Sony etc
1. Press the Play/Pause button on the
earphones.
2. Press the answer button on your
phone
ENDING A CALL
1. Press the Play/Pause button.
REJECTING A CALL
1. Hold the Play/Pause button for
2 seconds and then release.