Akaso Video Doorbell 2 User manual

USER
MANUAL
Video Doorbell 2

Packing List
Appearance Introduction
Introduction
Features
Settings
APP Interface
Technical Specification
Troubleshooting
Contact US
1
2
3
4
8
9
9
10
10
CONTENTS

12
AKASO Doorbell Bracket
1. Light Sensor
2. MIC
3. Main Button
4. PIR
5. Lens
6. IR LED
7. Indicator Light
8. Speaker
9. AC Input
10. Reset Button
11. Battery Compartment
12. USB Port
13. AC Input Hole
14. Fixed Hole
15. Stuck Hole
16. Security Screw Hole
APPEARANCE INTRODUCTION
PACKING LIST
Two 18650 Batteries Screws And Anchors
RESET
8
9
10 12
11
13
14
16
15
4
5
7
6
1
2
3

1. Light Sensor - Enable the infrared light when illumination is below 2lux.
2. MIC - Capture voice and Intercom.
3. Main Button - Wake up the device and inform you when someone visit.
4. PIR - Detect human body’s movement and send alarm to smart phone.
5. Lens - Capture image video.
6. IR LED - When the light is not strong, it will enable infrared light to increase the
environment brightness.
7. Indicator Light - Red light flash slowly: waiting for Wi-Fi configuration
Blue light flash slowly: working status
Red light and blue light flash alternately: Wi-Fi connecting failed
8. Speaker - Emit system sound and intercom.
9. AC Input - Supply power to device by installing the AC input supply hole on the
mounting bracket.
10. Reset Button - Long press more than 5 seconds to restore factory settings.
11. Battery Compartment - Mounting 18650 specification battery.
12. USB - Supply power to device through USB cable.
13. Fixed Hole - Fit the support on the wall with the mounting screws for the
mounting kit.
14. Stuck Hole - Mounting the equipment onto the bracket.
15. AC Input Hole - The power supply of the equipment can be supplied by connecting
the hole and the AC power supply on the wall.
16. Security Screw Hole - Mounting the security screw on the fittings to prevent the
equipment from being removed.
34
FEATURES
INTRODUCTION
Enter the device’s management
password
Password
Confirm
Step 2
Step 1
① Step 1: Enter to monitor interface, click
the share key.
② Step 2: Input the management password,
click ’Confirm’.
1. Add more users for the doorbell

56
Share
Tin: Generate a share code for other users,
other users scan the device and use it.
admin
Share
Tin: Generate a share code for other users,
other users scan the device and use it.
admin
SHARE
Nickname
Leo
Confirm
SHARE
Step 3
Step 4
Share
Tin: Generate a share code for other users,
other users scan the device and use it.
admin
Main
ADD
DEVICE
SHARE
Step 5
Step 6
⑤Step 5: APP generates a shared QR code,
new users open the APP, operate
as step 6. after finished, click
‘Confirm’ to exit the APP.
④Step 4: Name the new user, and click
the ‘Confirm’.
⑥ Step 6: New users open the APP, click ‘+’
and ’Scan QR Code‘. After scanning,
return to the main interface, click
the device interface to wake it up.
It allows up to 4 devices to use at
the same time.
③Step 3: Click the ‘SHARE’.
Share
QR code is valid for 24 hours. The user
list will not be updated after sharing
successfully. Requires other users to
scan and add devices, and will be
effective after a successful connection
Confirm
Add Device
No Device
Scan QR Code

SETTINGS
78
2. Save the Recordings to local files
20180528
20180528
Time: 17:07:34 Duration: 00:16
20180528
Recording Record
20180528
20180528
Time: 17:07:34 Duration: 00:16
20180528
Recording Save
ToSee
Main
Message
Help
General
File
①Enter to playback interface.
② Choose one videos and click ‘Record’
to start recording.
③Save the videos.
④ The videos will be saved on both of
built-in SD card and local photos,
you can load it to your computer.
1. Ultra low power consumption
- Default is on
2. Device indicator light
- Default is on
3. Night Vision Infrared Light
- Default is on
4. Ring Volume
- Default is on
- This is device’s volume when ring the doorbell
5. Video Length - off / 15s / 30s / 45s
- Default is 15s
6. Motion Detection Sensitivity
- Default is 10s
- 10-second delay trigger on PIR motion detection
7. Intercom Volume
- Default is 6.
- Adjust intercom volume when you talk to your
visitors.
8. Total Storage
- Shows the storage of built-in SD card
9. Available Storage
- Shows the available Storage
10. Format SD Card
- Please format it in the doorbell to ensure that the SD card is compatible with the
device.
11. Device Information
- Check the doorbell’s version
123
4

Resolution
Field of Angle View
Wi-Fi
Audio
Recording
SD Card
Battery
IR LED
APP INTERFACE
TECHNICAL SPECIFICATION
Recording Save
① Menu ② Add device ③ Delete device
④ Exit ⑤ Share ⑥ Settings ⑦ Device Status
1280 * 720
166 Degree
Support IEEE 802.11b/g/n
Clarity Intercom
Loop recording with Micro SD Card
Max. Up to 32G (packed with 8G internal micro SD card)
2 * 18650 Battery (TOTAL 5200mAh)
6 * 850mm led lights
TROUBLESHOOTINGS
Q: The doorbell can’t connect Wi-Fi
A: 1. Make sure the connect Wi-Fi is 2.4GHz
2. Make sure the indicator red light flash slowly
3. Check the password whether it is correct or have space
Q: The doorbell can’t receive any notifications
A: Please check it again whether your phone notification permission enabled.
Q: How to supply power to the doorbell?
A: 1. Use the 18650 battery standalone.
2. Use AC(14-24V) input.
3. USB cable charge (5V).
Q: Why there has a notification, but I can’t find the file on message sometimes?
A: This problem will be shown on iOS system, if you get the notification and didn’t open
it in time, then the iOS system will kill some files, so you can’t find it on message.
Please go back to playback interface, then you can find some files you need.
Q: The doorbell cannot connect the chime.
A: 1. Please check that neither the doorbell nor the chime are near to possible electrical
interference sources, such as a power adaptor, or other wireless devices.
2. The range will be reduced by obstacles such as wall, although this will have been
checked during setup. Check that nothing, particularly a metal object, has been
placed between the doorbell and chime. You may need to re-position the doorbell.
Contact US
For any inquires, issue or comments concerning our products, please send E-mail to the
address below, and we will respond as soon as possible.
E-mail: [email protected]
US customer service line: [phone]
8am-5pm PST Monday-Friday (except holidays)
910
front doorbell Playback Delete
12
3
5
7
6
4