AKIBA SLX-26AL User manual

SLX-26AL Alarm Sensor
Manual
GENERAL :
Welcome to using SLX-26AL Alarm Sensor.
The product is a compact, portable or wall mounted unit, which requires no
wiring, It will alarm when a person crosses its detection field, the unit is suitable
for home Simple security, off-limits and burglarproof when business travel. A
100% DIY product which only requiring your effort to put in a battery and start
operating.
Ideal place to install is at entrances. Get a unit to try today for your
offices/shops/factories and etc….
SPECIFICATIONS:
Battery Powered : DC9V
Detecting distance: 6m (max)
Detecting angle: 120º
Operating temperature: -10~40℃
Relative humidity: <90%RH
Detecting moving speed: 0.6~1.5m/s
Static current: ≤40uA
Alarm volume: >70db
Alarm time-delay: 20~30sec
Switch Function: Low Alarm / High Alarm / Off
FUNCTION:
• Providing most reliable monitor through day and night;
• High sound volume alarm;
• Battery powered and no wiring required;
• While being wall mounted 120º adjustable.
www.akiba-accessories.com

INSTALLATION & TEST: (see following diagrams)
• Set the switch OFF, Remove the battery cover and insert a DC 9V cascading batteries into battery
compartment.
• Slide the switch to open state, the unit will alarm, after 20~30s it stops, that indicates it is normal, The switch
position: OFF\L(low sound)\H(high sound)
• You can either position the unit in a stable place. Or insert it into the bracket installed on the wall with screws
and mount it.
• Adjusting the bracket, let its field of view aim at the region to be detected. The moving person have to cross the
sensing fingers of the field of view (Note : See the following detection diagram);
• Sense once, the unit will alarm at once, the alarm time is usually 20~30sec.
DETECTION OF MOVEMENT
NOTE :
zThe unit should be checked by walking test periodically to assure proper operation. If the unit does not work properly,
please replace the batteries and retest the unit.
zRemove the batteries when NOT IN USE for a long period of time.
zShall not block between the unit and desired area of detection
zThe unit and its detection area should not be exposed to direct sunlight, electric fans, etc.
zThe interval between the first induction and next induction should be 5sec.
CG Com Trading, Krystal Point Corporate Park II, Unit 1-3-6, 3
rd
Floor, Lebuh Bukit Kecil 6, 11900, Bayan Lepas, Penang
Tel : [phone] Fax : [phone]
Website : www.akiba-accessories.com
www.akiba-accessories.com