akira AC-S10CLG1 User manual

Air Conditioner
Service Manual

2
Model No.: AC-S10CLG1.doc
Version: 1.0
MODEL:AC-S10CLG1

3
Model No.: AC-S10CLG1.doc
Version: 1.0
CONTENTS
TECHNICAL SPECIFICATION………………………………………………………………………..4
PARTS NAME…………………………………………………………………………………………..5
SYSTEM DAIGRAM…………………………………………………………………………………...6
CIRCUIT DIAGRAM………………………………………………………………………...................8
DISASSEMBLY PROCEDURES……………………………………………………………………….9
EXPLODED VIEWAND PARTS LIST……………………………………………………………….18
GUIDE FOR INSTALLATION……………………………………………………………………….. 22
CARE AND MAINTENANCE…………………………………………………………………….…..29
MULFUNCTION ANALYSIS…………………………………………………………………………30

4
Model No.: AC-S10CLG1.doc
Version: 1.0
TECHNICAL SPECIFICATION
Model AC-S10CLG1
Function Cooling /
Power Supply 1Ph 230V / 50Hz
Capacity (Btu/h) 9600 /
Rated Input (W) 1000 /
Rated Current (A) 5.7 /
Air Flow (m³/h) 400
Dehumidifying Volume (L/h) 1.0 /
EER ( W / W) 2.8 /
Model AC-S10CLG1
Motor Fan Speed (rpm) 980
Output Fan Power (W) 13
Fan Type / Piece Cross Flow Fan – 1
Diameter – Length Φ97mm – 583mm
Evaporator Aluminum Fin – Copper Tube
Row-Fin Distance (mm) 2 – 1.5
Swing Motor MP 28 VA
Fuse (A) PCB 3.15A Transformer 0.2A
Noise (db / (A)) < 37
Dimension (w x h x d)(mm) 770 x 190 x 250
Indoor Unit
Net Weight (kg) 8.0
Model AC-S10CLG1
Input Power (W) 960 /
LRA (A) 4.5
Throtting Method Capillary
Compressor Hermetic Motor Compressor
Working Temp. < 43º C
Condenser Aluminum Fin-Copper Tube
Pipe-Diameter (mm) 9.52
Row-Fin Distance (mm) 1 – 1.6
Working Area /
Fan Motor Power (W) Speed
(rpm) 20 / 950
Fan Type-Piece Axial Flow Fan – 1
Diameter (mm) 320
Defrosting Method Auto Defrosting
Noise (db/ (A)) < 52
Dimension (w x h x d) (mm) 720x 260 x 430
Net Weight (kg) 25
Outdoor Unit
Refrigerant Charge R22 / 0.65
Liquid (mm) Φ6
Outer Diameter Gas pipe (mm) Φ9.52
Height (m) 10
Connecting Pipe
Max. Distance Length (m) 20
The technical data are subject to change without notice. Please refer to the nameplate of the unit.

5
PARTS NAME
Model No.: AC-S10CLG1.doc
Version: 1.0

6
SYSTEM DIAGRAM
When the power is on, the unit start to work. The compressor sucks low-pressure
refrigerant gas from the evaporator and discharges high-temperature and high-pressure
gas into condenser. Then air exchanges the heat with outdoor air and becomes
refrigerant liquid. The liquid is throttled by the capillary and changes into low-pressure
liquid and low-pressure liquid and then flows into indoor evaporator. The liquid
exchanges the heat and changes into low-temperature and low-pressure refrigerant gas,
the cycle introduced above goes on and on, and the demanded low temperature
environment is maintained.
Model No.: AC-S10CLG1.doc
Version: 1.0

7
When the power is on, indoor and outdoor units will start to run. When the system
operates in cool mode, the compressor sucks low-temperature refrigerant gas from the
evaporator an sucked by compressor, compressor into high-temperature, high-pressure
Gas, and then discharges into condenser, heat exchanges with the outdoor air becomes into
refrigerant liquid, the liquid is throttled by the capillary and the temperature and
pressure lower down, enter into the evaporator, heat exchanges with the indoor air which
need to be adjusted, then changes into low-temperature, low-pressure refrigerant gas, the
cycle introduced above goes on and on, the demanded low temperature environment is
maintained. (when in heat mode, the 4way valve changes its way and the refrigerant flows
in the reversible cycle, to make the condenser sucks heat, evaporator discharges heat, and
the demanded high temperature environment is maintained.
Model No.: AC-S10CLG1.doc
Version: 1.0

8
CIRCUIT DIAGRAM
Model No.: AC-S10CLG1.doc
Version: 1.0

9
DISASSEMBLY PROCEDURES
Model No.: AC-S10CLG1.doc
Version: 1.0

10
Model No.: AC-S10CLG1.doc
Version: 1.0

11
Model No.: AC-S10CLG1.doc
Version: 1.0

12
Model No.: AC-S10CLG1.doc
Version: 1.0

13
Model No.: AC-S10CLG1.doc
Version: 1.0

14
Model No.: AC-S10CLG1.doc
Version: 1.0

15
Model No.: AC-S10CLG1.doc
Version: 1.0

16
Model No.: AC-S10CLG1.doc
Version: 1.0

17
Model No.: AC-S10CLG1.doc
Version: 1.0

18
EXPLODED VIEW – Indoor Unit
Model No.: AC-S10CLG1.doc
Version: 1.0

19
Model No.: AC-S10CLG1.doc
Version: 1.0
PART LIST – Indoor Unit
NO. Part Code Part Description Qty
101252220 Wall Mounting Frame 1
2222020012 Rear Case 1
301002072 Evaporator Assy 1
410352001 Cross Flow Fan 1
576512203 O-Gasket of Cross Fan Bearing 1
605232411 Drain Pipe 1
720182027 Water Tray 1
810512032 Air Louver 12
910582002 Swing Lever 1
10 10582003 Swing Lever 1
11 20002210 Front Case 1
12 24252006 Screw Cap 3
13 11122002 Filter 2
14 30512506 Remote Control Y512 1
15 68012019 Magic Mirror 1
16 30545702 Display Board 1
17 20002209 Front Panel 1
18 10512034 Guide Louver 1
19 10512033 Guide Louver 1
20 15212110 Stepping Motor 1
21 26112014 Motor Press Plate 1
22 15012064 Fan Motor 1
23 22242030 Electric Box Cover 1
24 42011240 4-bit Terminal Board 1
25 201220061 Electric Box Cover 1
26 20102178 Electric Box 1
27 30055787 Main Board 1
28 43110204 Transformer 1
29 71010103 Fixed Clamp 1
30 24242001 Pipe Clamp 1
31 40020540 Connecting Cable 1
32 Signal Cable
33 400202802 Power Cord 1
34 10582409 Press Plate of Swing Link 1
35 10582408 Swing Louver 1
36 10542004 Swing Louver(up) 1
37 10542005 Swing Louver(down) 1
The data are subject to change without prior notice

20
Model No.: AC-S10CLG1.doc
Version: 1.0
EXPLODED VIEW – Outdoor Unit