akira AC-S10HPGB User manual

Air Conditioner
Service Manual
   
http://splitoff.ru/tehn-doc.html
, ,  , .

2
Model No.: AC-S10HPGB.doc
Version: 1.0
MODEL:AC-S10HPGB
    : http://splitoff.ru/tehn-doc.html

3
Model No.: AC-S10HPGB.doc
Version: 1.0
CONTENTS
TECHNICAL SPECIFICATION………………………………………………………………………..4
PARTS NAME…………………………………………………………………………………………..5
SYSTEM DAIGRAM…………………………………………………………………………………...6
CIRCUIT DIAGRAM………………………………………………………………………...................8
DISASSEMBLY PROCEDURES……………………………………………………………………….9
EXPLODED VIEWAND PARTS LIST……………………………………………………………….18
GUIDE FOR INSTALLATION……………………………………………………………………….. 23
CARE AND MAINTENANCE…………………………………………………………………….…..30
MULFUNCTION ANALYSIS…………………………………………………………………………31
    : http://splitoff.ru/tehn-doc.html

4
Model No.: AC-S10HPGB.doc
Version: 1.0
TECHNICAL SPECIFICATION
Model AC-S10HPGB
Function Cooling Heating
Power Supply 1Ph 220V ~ 230V / 50Hz
Capacity (W) 3200 3600
Rated Input (W) 1150 1150
Rated Current (A) / /
Air Flow (m³/h) 380
Dehumidifying Volume (L/h) 0.8 ~
EER ( W / W) 2.6 2.8
Model AC-S10HPGB
Motor Fan Speed (rpm) 960
Output Power (W) 8
Fan Type / Piece Cross Flow Fan – 1
Diameter – Length Φ97mm – 583mm
Evaporator Aluminum Fin – Copper Tube
Row-Fin Distance (mm) 2 – 1.4
Working Area (m³) 0.14
Swing Motor MP 28 EA
Input (W) /
Fuse (A) Controller Fuse 5A
Working Capacitor (µ F) 1
Noise (db / (A)) < 38
Dimension (w x h x d)(mm) 740 x 250 x 180
Indoor Unit
Net Weight (kg) 8.0
Model AC-S10HPGB
Input Power (W) 880 880
Current (A) 4.1 4.1
LRA (A) 18
Throtting Method Capillary
Compressor Rolling Piston Type
Working Temp. < 115º C
Condenser Aluminum Fin-Copper Tube
Pipe-Diameter (mm) 9.52
Row-Fin Distance (mm) 1 – 1.6
Working Area /
Fan Motor Power (W) Speed
(rpm) 20 / 950
Fan Type-Piece Axial Flow Fan – 1
Diameter (mm) 320
Defrosting Method Auto Defrosting
Noise (db/ (A)) < 52
Dimension (w x h x d) (mm) 660 x 320 x 428
Net Weight (kg) 25
Outdoor Unit
Refrigerant Charge R22 / 0.78
Liquid (mm) Φ6
Outer Diameter Gas pipe (mm) Φ12
Height (m) 5
Connecting Pipe
Max. Distance Length (m) 10
The technical data are subject to change without notice. Please refer to the nameplate of the unit.
    : http://splitoff.ru/tehn-doc.html

5
PARTS NAME
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

6
SYSTEM DIAGRAM
When the power is on, the unit start to work. The compressor sucks low-pressure
refrigerant gas from the evaporator and discharges high-temperature and high-pressure
gas into condenser. Then air exchanges the heat with outdoor air and becomes
refrigerant liquid. The liquid is throttled by the capillary and changes into low-pressure
liquid and low-pressure liquid and then flows into indoor evaporator. The liquid
exchanges the heat and changes into low-temperature and low-pressure refrigerant gas,
the cycle introduced above goes on and on, and the demanded low temperature
environment is maintained.
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

7
When the power is on, indoor and outdoor units will start to run. When the system
operates in cool mode, the compressor sucks low-temperature refrigerant gas from the
evaporator an sucked by compressor, compressor into high-temperature, high-pressure
Gas, and then discharges into condenser, heat exchanges with the outdoor air becomes into
refrigerant liquid, the liquid is throttled by the capillary and the temperature and
pressure lower down, enter into the evaporator, heat exchanges with the indoor air which
need to be adjusted, then changes into low-temperature, low-pressure refrigerant gas, the
cycle introduced above goes on and on, the demanded low temperature environment is
maintained. (when in heat mode, the 4way valve changes its way and the refrigerant flows
in the reversible cycle, to make the condenser sucks heat, evaporator discharges heat, and
the demanded high temperature environment is maintained.
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

8
CIRCUIT DIAGRAM
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

9
DISASSEMBLY PROCEDURES
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

10
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

11
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

12
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

13
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

14
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

15
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

16
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

17
Model No.: AC-S10HPGB.doc
Version: 1.0
    : http://splitoff.ru/tehn-doc.html

18
Model No.: AC-S10HPGB.doc
Version: 1.0
EXPLODED VIEW – INDOOR UNIT
    : http://splitoff.ru/tehn-doc.html

19
Model No.: AC-S10HPGB.doc
Version: 1.0
PART LIST – Indoor Unit
No. Description Part No. Qty
1 Wall Mounting Frame 01252220 1
2 Rear Case 22202057 1
3 Evaporator Defrosting Gutter 06122001 1
4 Drain Pipe 052324111 1
5 Pipe Clamp 24242004 1
6 Cross Flow Fan 10352001 1
7 Fan Bearing 76512210 1
8 O-Gasket of Cross Fan Bearing 76512203 1
9 Water Tray 20182049 1
10 Air Louver 10512079 12
11 Swing Lever 10582052 1
12 Lever 10582051 2
13 Evaporator Assy 010021271 1
14 Evaporator Support 24212058 1
15 Front Case 20002602 1
16 Screw Cap 24252013 2
17 Front Panel AC-S10HPGB 1
18 Filter Assy 11122009 2
19 Air Cleaner Holder 24222008 2
20 Air Deflector 10512078 1
21 Remote Control 30515002 1
22 Axle Bush of Guide Louver 10542011 3
23 Main Board 30030033 1
24 Protective Tube 46010014 1
25 Ambient Temp. Sensor 390000451 1
26 Tube Sensor 390000592 1
27 Sensor Insert 42020063 1
28 Stepping Motor 15212105 1
29 Fan Motor 15012064 1
30 Motor Press Plate 26112080 1
31 Wire Clip 26112082 1
32 Fixed Clamp 71010103 1
33 Indicator Light Support 24212059 1
34 Receiver Board 30046056 1
35 Receiver Board K 30042017 1
36 Terminal Board T240A / 1
37 Electric Box Cover 20102112 1
38 Electric Box 20112014 1
39 Transformer 43110231 1
    : http://splitoff.ru/tehn-doc.html

20
Model No.: AC-S10HPGB.doc
Version: 1.0
40 Connecting Cable 400202452 1
41 Power Cord 400220111 1
42 Connecting Cable 4003213450 1
43 Cold Plasma Generator 11140005 1
44 Cold Plasma Device Cover 22262005 1
The data are subject to change without prior notice.
    : http://splitoff.ru/tehn-doc.html