AKSOTRONIK LC200A User manual

LC200A Handheld L/C Meter
User Manual
LC200A Handheld L/C Meter
Inductance Capacitance Meter
1

LC200A Handheld L/C Meter
Features:
High speed microcontroller’s precision computation
Measuring range below 1uH and 1pF
Intellectually Shutdown in 5 minutes
Especially qualify in microwave manufacture and measuring
switching power supply transformer, filter inductance and so on.
LC200A has four measuring range position:
1. C range ........Capacitance (0.01pF-10uF)
2. L range ........Inductance (0.001uH-100mH)
3. Hi.L range ......Big inductance (0.001mH-100H)
4. Hi.C range ......Big capacitance (1uF-100mF)
All range position are automatic measuring ranges, it is easy to
operate. Specification is as follows:
1. Technique data：Item Parameter
0.01pF-1pF 5%
1pF-1uF 1%
Capacitance
Accuracy 1uF-10uF 5%
Min Capacitance Resolution（C Range）0.01pF
0.001uH-1uH 5%Inductance
Accuracy 1uH-100mH 1%
Min Inductance Resolution（L Range）0.001uH
Big Inductance 100mH-1H 1%
2

LC200A Handheld L/C Meter
Accuracy 1H-100H 5%
Min Resolution of Big Inductance
（Hi.L Range）0.001mH
Big Capacitance Accuracy 1uF-100mF 5%
Min Resolution of Big Capacitance
（Hi.C Range）0.01uF
L Range、C Range Abt. 500kHz
Frequency Hi.L Range Abt. 500Hz
Display mode 1602 LCD
Display digit 4
Power supply interface
Mini USB &
5.5DC Socket
4 of AA
Batteries
Supply Voltage 5V
3

LC200A Handheld L/C Meter
2. Picture
4

LC200A Handheld L/C Meter
5

LC200A Handheld L/C Meter
Function of five buttons:
Red: Reset
Blue: Big Capacitance Hi.C Choice (With self-locking)
Blue: Big Inductance Hi.L Choice (with self-locking)
Blue: L/C Choice (with self-locking)
Blue: Function button
Details as follows (Press “1”, Release “0”, “X” random)
LC200A Function table
Hi.C Hi.L L/C Corresponding function
0 0 0
Small Capacitance(C)
0 0 1
Small Inductance(L)
0 1 1
Big Inductance (Hi.L)
0 1 0
Error，please modify
0 X X
Big Capacitance (Hi.C)
3. Direction for use
⑴. Switch on the L/C Meter
⑵. Chose the corresponding range, inductance: Lx, capacitance:
Cx, big inductance: Hi.L, big capacitance: Hi.C. Display as
follows (testing lead open loop) ：
Inductance：MEASURELx OVERRANGE
6

LC200A Handheld L/C Meter
Capacitance：MEASURECx 0.00pF
Big inductance：MEASUREHi.L OVERRANGE
Big capacitance：MEASURE Hi.C 0.00uF
Display as follows (testing lead short circuit):
Big inductance：MEASUREHi.L 0.000mH
Inductance：MEASURELx 0.000uH
Capacitance：MEASURE Cx OVER RANGE
(3).When testing lead open loop the measured value of
capacitance is not “0”, or witch of the inductance is not “0” as
the testing lead short circuit, you can reset to “0” by ways of
capacitance model and inductance model, as follows:
(a) Capacitance model
Press red button as testing lead open loop, it displays
“CALCULATING…”, keep pressing for one second, when
“CALCULATING…OK” displayed, resetting to “0” is finished,
and “0.00pF” is displayed, then capacitances can be
measured.
(b) Inductance model
Press red button as testing lead short circuit, it displays
“0.000uH” or “0.000mH”, and then inductances can be
measured.
(4). Please press function button as results displayed, and
7

LC200A Handheld L/C Meter
8
corresponding frequency will be displayed.
4. Note:
1. Please reset to “0” before testing a capacitance or an inductance,
or errors may be appeared. Even if “0” displayed before
measuring, resetting to “0” is needed.
2. At the time of resetting to “0”, when“CALCULATING…OK”
appeared, please keep pressing for 2 to 3 seconds, and the
parameter written to “<DATA SAVED>” will be prompted, then
release.
3. Resetting to “0” is forbidden as components are being measured.
If you do it, please shut down immediately and restart, then reset
to “0”.
4. The time of measuring a big capacitance (above 10mF) may be
more than one second, and it needs seven to eight seconds to
get the measured value of the capacitance (100mF).
5. Forbid to measure a capacitance which is not discharged,
otherwise it may damage the mainframe.
5. Package content
1. A LC200A L/C Meter
2. A mini USB Cable or DC5V adaptor