Akura ATLDVD2630W-HDID User manual

26”LCD TV COMBI WITH DVD & DVB FREEVIEW
Model No.: ATLDVD2630W-HDID

Environmental issues. When leaving the Tv for long periods or overnight, turn off the
supply with the Mains switch, do not leave in standby. Do not leave in standby when
leaving the house or the set un attended.

Do not place the TV on an unstable surface, it may tip over and
cause injury or damage to the LCD screen.
Do not place the TV in a cabinet where airflow is restricted, ensure the ventilation
holes are not covered to prevent overheating. Do NOT cover the DC mains adap-
tor, this will feel warm to the touch and must be allowed to radiate the heat.
Do not use the TV in wet or damp conditions, if water or liquids are allowed to
enter the case, disconnect the power and return to point of purchase. Do not
handle the TV or Power adaptor with wet hands.
During an Electrical storm or when going on holiday, disconnect from the mains
supply and aerial (if external or rooftop).
Do not place heavy objects on the mains lead or DC supply lead, do not place
where they can be stepped on, cut or damaged. If the leads do become damaged
please return to point of purchase for advice.
Do not drop or damage the TV. If the casing becomes damaged it may cause a
safety issue. Do not open the case or Power adaptor, you risk a severe electric
shock, injury or death. Do not drop objects into the TV ventilation slots or DVD
disc slot. Should an object enter the TV, return to point of purchase for advice.
Do not place the TV near heat sources such as radiators or direct sunlight.
Cleaning the TV. Disconnect from the supply before cleaning. Do NOT use petrol
based or chemical cleaning fluids. You may wipe with a soft damp cloth. For stub-
born sticky dirt use a dilute detergent solution.
LCD Screen. Do NOT use chemical solvents on the screen surface, sticky finger
marks must only be removed with a dilute detergent solution. Occasionally one or
two bright dots may be seen on the screen, this is not considered a fault.

3
DVD operation------------------------------------
DVB operation------------------------------------
14
20
System operation-------------------------------18
24
25
26

100-240V 50/60Hz
TV-EXIT
TV-AV

Press to display the input source menu
P+/-
V+/-
Insert the disc with the mirror side facing towards you
Power Led indicator
Remote control window(keep clear)
PLAY: Play/pause DVD program.
STOP: Stop DVD program.
NEXT: DVD next chapter.
PREV: DVD previous chapter.
EJECT: Load/eject DVD disc.
1. (IR) Infrared Receiver, receives IR signals from the remote control.
(Power on/standby) LED Indicator: press POWER to turn on and off.
Indicator on (Blue) set in standby. Indicator off, set operational.
The effective range of the Remote control is more than 4 metres, and 30º to the left
or right and 20º above or below the receiver window.

1. AC POWER INPUT: 100-240V AC 50/60Hz. (Warning: This appliance must be earthed).
2. SWITCH: Turns on and off the AC supply.
3. HDMI 1 / 2: Connect to the HDMI sockets of DVD player or other equipment.
4. VGA: PC Display. Connect to the D-Sub 15 pin connector of PC.
5. PC AUDIO IN: Connect to Audio output of PC sound card.
6. S-VIDEO: Connect to S-Video socket of DVD player or similar equipment (video only).
7. YpbPr Y: Connect all to video output connectors of DVD or similar equipment (Video only).
8. VIDEO AV: Connect to AV connector of DVD or similar equipment (Video only).
9. L/R in: Connect to audio output connectors of DVD or similar equipment when using S-Video, AV or YpbPr
connectors.
10. SCART 1 / 2: Connect to Scart connector of DVD or similar equipment.
SCART 1:supports CVBS (AV) and RGB signal inputs.
SCART 2: supports CVBS (AV) only.
11. RF: TV tuner input. 75 Ohm coaxial socket.

: Load/eject DVD disc
: Play/pause DVD program
: Stop DVD program
: DVD fast reverse
: DVD fast forward
: DVD previous chapter
: DVD next chapter
1. POWER: Turn the TV on or turn it standby
3. TV-MENU: TV system menu
4. CH+/-: Channel up/down
5. VOL+/-: Volume up/down
6. TV-EXIT: Exit from the OSD menu
7. TV/AV: Source select
8. DISPLAY: Display the current modeˈof DVD information.
9. : Cursor buttons for OSD operation
OK: Confirmation
10. MUTE: Silence status or cancel
11. DVD-SETUP: DVD system setup.
12. 0-9, -/--: Choose channel
13. : Do to play the latest program
14. PICTURE: Select picture mode
15. SOUND: Select sound mode
16. NICAM/A2
17. MUTE: silence.
18. SLEEP: shutdown timer.
2 buttons for TELETEXT
TV/TXT: Turn off/on the Teletext display.
CANCEL: Cancel the Teletext display.
REVEAL: Reveal any hidden text.
HOLD: Hold or carry on the current subpage.
SIZE: Press to see top half of page double size.
Press again to see the bottom half of page double size.
Press again for normal size.
SUBPAGE: Press to subpage, again to cancel.
INDEX: go to index.
Colour buttons: Short cuts-follow the coloured links in the text.
19Buttons for DVD operation.
DVB-MENU: To display the main menu on the screen or return
to the screen from a menu screen
PROG+/-: DVB program up/down
LANGUAGE: To select audio language.
TV FORMAT: To change the picture mode
SUBTITLE: To switch the dialog at the bottom of the screen
TEXT: To view the teletext broadcasting program
INFO: Means information, to display brief information
concerning the current channel you are viewing
FAV: Means favorite, to display the favorite channel list defined by you.
EPG: To show the Electronic Program Guide during no-menu state only.
RED button, GREEN button (DVB-TV RADIO), YELLOW button (DVB-LANGUA
GE), BLUE button(DVB-TIMER): short cuts-follow the coloured links in the text.
4
2
2 buttons for DVD operation 17 buttons for DVD operation
DVD-SETUP: DVD system setup
LANGUAGE: Select DVD disc language
ZOOM: Adjust picture size in DVD mode
SUBTITLE: Turn on/off the DVD subtitle display
GOTO: DVD search, Tracks or Chapters
MENU: DVD play list/Disc menu
ANGLE: Select DVD picture angle
TITLE: DVD title
PROGRAM: Edit the program and play
SLOW: play DVD programs at slow speed
REPEAT: Play the title or chapter once again
A-B:Select and play the preferable paragraph of DVD program
by pressing this key twice at the beginning and end of it.
TV-EXIT
TV-AV
1
3
5
6
78
9
11
10
12
13
17
15
18
19
16

YPbPr
MP Input
TV/AV
MENU
P-
P+
V-
V+
TV-EXIT
TV/AV
(you can also use “P+/- V+/-” buttons on the TV set to operation the OSD MENU)
(P+/-)
(V+/-)
DVD
DVB
button