AL LaserTESTER User manual

AL LaserTESTER
USE
AL Laser Tester is a LED laser signal emitter with different laser
frequencies stored in its microprocessor. At default factory setup it
can simulate 9 known laser signals.
AL Laser Tester operates on a 9V battery (provided with the
product). Press and hold the Button and direct the tester towards
the laser receiver that is being tested. While the button is kept
pressed a red LED will indicate that the laser tester is emitting a
laser signal. The tester emits 9 different LIDAR frequencies. They
alternate in sequence of 5 seconds for each LIDAR. To test a
specific LIDAR from the list aim the tester at the receiver only
when desired LIDAR is about to commence emiting. Before
a signal is emitted red LED will blink the number of times showing
the ID of the LIDAR from the list:
1. Ultralyte 100
2. Ultralyte 200LR/Compact
Marksman/LaserCam
3. Trafipatrol XR
4. Prolaser 2
CAUTION:
IR Laser tr
d
Made in Croatia, YOP 2010
5. Prolaser 3
6. Laser Atlanta Stealth
7. Stalker LZ1
8. Amata Video Laser
9. Zurad Rapid Laser
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com