Alarm Controls Corporation 4152 User manual

A SAFE AND CONVENIENT WAY TO DIS-CONNECT
PANEL POWER
REMOVES POWER FROM BACK-UP BATTERY AND
A/C SOURCE
D.P.S.T. SWITCH WITH 10 AMP. CONTACTS
UNIQUE CLIP ALLOWS QUICK AND EASY
INSTALLATION
MOUNTS IN ANY SECURITY CABINET
ALARM CONTROLS CORPORATION
19 BRANDYWINE DRIVE DEER PARK, NY 11729
1 631 586-4220 1 800 645-5538
WWW.ALARMCONTROLS.COM EMAIL [email protected]
MODEL 4152
KILLSWITCH

INSTALLATION INSTRUCTIONS
4152 KILLSWITCH
MAKE SURE KILLSWITCH IS IN THE “OFF” POSITION BEFORE INSTALLING
1. CLIP KILLSWITCH ASSEMBLY TO SIDE OF CONTROL PANEL CABINET.
2. REMOVE POSITIVE LEAD FROM BATTERY AND CONTROL PANEL AND DISCARD.
3. CONNECT RED LEAD WITHOUT FASTON TERMINAL TO CONTROL PANEL POSITIVE
TERMINAL.
4. CONNECT RED LEAD WITH FASTON TERMINAL TO POSITIVE BATTERY TERMINAL.
5. REMOVE ONE SIDE OF A/C TRANSFORMER LEAD AND CONNECT BROWN LEAD
FROM KILLSWITCH
6. CONNECT OTHER BROWN LEAD FROM KILLSWITCH TO CONTROL PANEL A/C
TERMINAL.
7. PLACE KILLSWITCH IN “ON” POSITION.
ALARM CONTROLS CORPORATION
DEER PARK, NY 11729