Alaxala AX6700S series Mounting instructions

AX6700S/AX6600S/AX6300S Software Manual
Operation Command Reference Vol. 2
For Version 11.7
AX63S-S011X-30



Relevant products
This manual applies to the models in the AX6700S, AX6600S, and AX6300S series of switches. It also describes the functionality of version
11.7 of the software for the AX6700S, AX6600S, and AX6300S series switches. The described functionality is that supported by the OS-S/
OS-SE basic software and optional licenses.


Export restrictions
In the event that any or all ALAXALA products (including technologies, programs and services) described or contained herein are controlled
under any of applicable export control laws and regulations (including the Foreign Exchange and Foreign Trade Law of Japan and United States
export control laws and regulations), such products shall not be exported without obtaining the required export licenses from the authorities
concerned in accordance with the above laws.


Trademarks
Cisco is a registered trademark of Cisco Systems, Inc. in the United States and other countries.
Ethernet is a registered trademark of Xerox Corporation.
Internet Explorer is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
IPX is a trademark of Novell, Inc.
Microsoft is either a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
Octpower is a registered trademark of NEC Corporation.
sFlow is a registered trademark of InMon Corporation in the United States and other countries.
UNIX is a registered trademark of The Open Group in the United States and other countries.
VitalQIP and VitalQIP Registration Manager are trademarks of Lucent Technologies.
VLANaccessClient is a trademark of NEC Soft, Ltd.
VLANaccessController and VLANaccessAgent are trademarks of NEC Corporation.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Other company and product names in this document are trademarks or registered trademarks of their respective owners.


Reading and storing this manual
Before you use the equipment, carefully read the manual and make sure that you understand all safety precautions.
After reading the manual, keep it in a convenient place for easy reference.


Notes
Information in this document is subject to change without notice.


Editions history
January 2012 (Edition 4) AX63S-S011X-30


Copyright
All Rights Reserved, Copyright(C), 2006, 2012, ALAXALA Networks, Corp.

History of Amendments
[For version 11.7]
Summary of amendments
In addition to the above changes, minor editorial corrections were made.
[For version 11.4]
Summary of amendments
[For version 11.3]
The chapter Filters and all subsequent chapters that were in the manual Operation Command Reference
Vol.1 up to version 11.2 were moved to this manual.
For details about the summary of amendments for version 11.2 and earlier, see the manual Operation
Command Reference Vol. 1 For Version 11.7.
Summary of amendments
Location and title Changes
16 SNMP •The following commands were added:
- show snmp
- show snmp pending
Item Changes
DHCP snooping •This chapter was added.
Item Changes
Access List Logging •This chapter was added.

i
Preface
Applicable products and software versions
This manual applies to the models in the AX6700S, AX6600S, and AX6300S series of
switches. It also describes the functionality of version 11.7 of thesoftware for the AX6700S,
AX6600S, and AX6300S series switches. The described functionality is that supported by the
OS-S/OS-SE basic software and optional licenses.
Before you operate the equipment, carefully read the manual and make sure that you understand
all instructions and cautionary notes. After reading the manual, keep it in a convenient place for
easy reference.
Unless otherwise noted, this manual describes functionality applicable to AX6700S, AX6600S,
and AX6300S series switches. Functionality specific to a model is indicated as follows:
[AX6700S]:
The description applies to AX6700S switches.
[AX6600S]:
The description applies to AX6600S switches.
[AX6300S]:
The description applies to AX6300S switches.
Unless otherwise noted, this manual describes functionality applicable to the basic software
OS-S/OS-SE. Functionality specific to an optional license is indicated as follows:
[OP-BGP]:
The description applies to the OP-BGP optional license.
[OP-DH6R]:
The description applies to the OP-DH6R optional license.
[OP-MBSE]:
The description applies to the OP-MBSE optional license.
[OP-NPAR]:
The description applies to the OP-NPAR optional license.
[OP-VAA]:
The description applies to the OP-VAA optional license.
Corrections to the manual
Corrections to this manual might be contained in the Release Notes and Manual Corrections
that come with the software.
Intended readers
This manual is intended for system administrators who wish to configure and operate a network
system that uses the Switch.
Readers must have an understanding of the following:
•The basics of network system management

ii
Manual URL
You can view this manual on our website at:
http://www.alaxala.com/en/
Reading sequence of the manuals
The following shows the manuals you need to consult according to your requirements
determined from the following workflow for installing, setting up, and starting regular
operation of the Switch.
Conventions: The terms "Switch" and "switch"
The term Switch (upper-case "S") is an abbreviation for any or all of the following models:
AX6700S series switch

iii
AX6600S series switch
AX6300S series switch
The term switch (lower-case "s") might refer to a Switch, another type of switch from the
current vendor, or a switch from another vendor. The context decides the meaning.
Abbreviations used in the manual
AC Alternating Current
ACK ACKnowledge
ADSL Asymmetric Digital Subscriber Line
ALG Application Level Gateway
ANSI American National Standards Institute
ARP Address Resolution Protocol
AS Autonomous System
AUX Auxiliary
BCU Basic Control Unit
BGP Border Gateway Protocol
BGP4 Border Gateway Protocol - version 4
BGP4+ Multiprotocol Extensions for Border Gateway Protocol - version 4
bit/s bits per second (can also appear as bps)
BPDU Bridge Protocol Data Unit
BRI Basic Rate Interface
BSU Basic Switching Unit
CC Continuity Check
CDP Cisco Discovery Protocol
CFM Connectivity Fault Management
CIDR Classless Inter-Domain Routing
CIR Committed Information Rate
CIST Common and Internal Spanning Tree
CLNP ConnectionLess Network Protocol
CLNS ConnectionLess Network System
CONS Connection Oriented Network System
CRC Cyclic Redundancy Check
CSMA/CD Carrier Sense Multiple Access with Collision Detection
CSNP Complete Sequence Numbers PDU
CST Common Spanning Tree
CSU Control and Switching Unit
DA Destination Address
DC Direct Current
DCE Data Circuit terminating Equipment
DHCP Dynamic Host Configuration Protocol
DIS Draft International Standard/Designated Intermediate System
DNS Domain Name System
DR Designated Router
DSAP Destination Service Access Point
DSCP Differentiated Services Code Point
DTE Data Terminal Equipment
DVMRP Distance Vector Multicast Routing Protocol
E-Mail Electronic Mail
EAP Extensible Authentication Protocol
EAPOL EAP Over LAN
EFM Ethernet in the First Mile
ES End System
FAN Fan Unit
FCS Frame Check Sequence
FDB Filtering DataBase
FTTH Fiber To The Home
GBIC GigaBit Interface Converter
GSRP Gigabit Switch Redundancy Protocol
HMAC Keyed-Hashing for Message Authentication
IANA Internet Assigned Numbers Authority
ICMP Internet Control Message Protocol
ICMPv6 Internet Control Message Protocol version 6
ID Identifier
IEC International Electrotechnical Commission

iv
IEEE Institute of Electrical and Electronics Engineers, Inc.
IETF the Internet Engineering Task Force
IGMP Internet Group Management Protocol
IP Internet Protocol
IPCP IP Control Protocol
IPv4 Internet Protocol version 4
IPv6 Internet Protocol version 6
IPV6CP IP Version 6 Control Protocol
IPX Internetwork Packet Exchange
ISO International Organization for Standardization
ISP Internet Service Provider
IST Internal Spanning Tree
L2LD Layer 2 Loop Detection
LAN Local Area Network
LCP Link Control Protocol
LED Light Emitting Diode
LLC Logical Link Control
LLDP Link Layer Discovery Protocol
LLPQ Low Latency Priority Queueing
LLQ+3WFQ Low Latency Queueing + 3 Weighted Fair Queueing
LLRLQ Low Latency Rate Limited Queueing
LSP Label Switched Path
LSP Link State PDU
LSR Label Switched Router
MA Maintenance Association
MAC Media Access Control
MC Memory Card
MD5 Message Digest 5
MDI Medium Dependent Interface
MDI-X Medium Dependent Interface crossover
MEP Maintenance association End Point
MIB Management Information Base
MIP Maintenance domain Intermediate Point
MRU Maximum Receive Unit
MSTI Multiple Spanning Tree Instance
MSTP Multiple Spanning Tree Protocol
MSU Management and Switching Unit
MTU Maximum Transfer Unit
NAK Not AcKnowledge
NAS Network Access Server
NAT Network Address Translation
NCP Network Control Protocol
NDP Neighbor Discovery Protocol
NET Network Entity Title
NIF Network Interface
NLA ID Next-Level Aggregation Identifier
NPDU Network Protocol Data Unit
NSAP Network Service Access Point
NSSA Not So Stubby Area
NTP Network Time Protocol
OADP Octpower Auto Discovery Protocol
OAM Operations, Administration, and Maintenance
OSPF Open Shortest Path First
OUI Organizationally Unique Identifier
packet/s packets per second (can also appear as pps)
PAD PADding
PAE Port Access Entity
PC Personal Computer
PCI Protocol Control Information
PDU Protocol Data Unit
PICS Protocol Implementation Conformance Statement
PID Protocol IDentifier
PIM Protocol Independent Multicast
PIM-DM Protocol Independent Multicast-Dense Mode
PIM-SM Protocol Independent Multicast-Sparse Mode
PIM-SSM Protocol Independent Multicast-Source Specific Multicast
PRI Primary Rate Interface

v
PS Power Supply
PSNP Partial Sequence Numbers PDU
PSP Packet Switching Processor
QoS Quality of Service
RA Router Advertisement
RADIUS Remote Authentication Dial In User Service
RDI Remote Defect Indication
REJ REJect
RFC Request For Comments
RGQ Rate Guaranteed Queueing
RIP Routing Information Protocol
RIPng Routing Information Protocol next generation
RMON Remote Network Monitoring MIB
RPF Reverse Path Forwarding
RQ ReQuest
RSTP Rapid Spanning Tree Protocol
SA Source Address
SD Secure Digital
SDH Synchronous Digital Hierarchy
SDU Service Data Unit
SEL NSAP SELector
SFD Start Frame Delimiter
SFP Small Form factor Pluggable
SMTP Simple Mail Transfer Protocol
SNAP Sub-Network Access Protocol
SNMP Simple Network Management Protocol
SNP Sequence Numbers PDU
SNPA Subnetwork Point of Attachment
SOP System Operational Panel
SPF Shortest Path First
SSAP Source Service Access Point
STP Spanning Tree Protocol
TA Terminal Adapter
TACACS+ Terminal Access Controller Access Control System Plus
TCP/IP Transmission Control Protocol/Internet Protocol
TLA ID Top-Level Aggregation Identifier
TLV Type, Length, and Value
TOS Type Of Service
TPID Tag Protocol Identifier
TTL Time To Live
UDLD Uni-Directional Link Detection
UDP User Datagram Protocol
UPC Usage Parameter Control
UPC-RED Usage Parameter Control - Random Early Detection
uRPF unicast Reverse Path Forwarding
VAA VLAN Access Agent
VLAN Virtual LAN
VPN Virtual Private Network
VRF Virtual Routing and Forwarding/Virtual Routing and Forwarding
Instance
VRRP Virtual Router Redundancy Protocol
WAN Wide Area Network
WDM Wavelength Division Multiplexing
WFQ Weighted Fair Queueing
WGQ Weighted Guaranteed Queueing
WRED Weighted Random Early Detection
WS Work Station
WWW World-Wide Web
XFP 10 gigabit small Form factor Pluggable
Conventions: KB, MB, GB, and TB
This manual uses the following conventions: 1 KB (kilobyte) is 1024 bytes. 1 MB (megabyte)
is 10242bytes. 1 GB (gigabyte) is 10243bytes. 1 TB (terabyte) is 10244bytes.

vii
Contents
Preface i
Applicable products and software versions .............................................................................i
Corrections to the manual .......................................................................................................i
Intended readers ......................................................................................................................i
Manual URL .......................................................................................................................... ii
Reading sequence of the manuals ......................................................................................... ii
Conventions: The terms "Switch" and "switch" .................................................................... ii
Abbreviations used in the manual ........................................................................................ iii
Conventions: KB, MB, GB, and TB ......................................................................................v
PART 1: Reading the Manual
1. Reading the Manual 1
Command description format .........................................................................................................2
Specifiable values for parameters ...................................................................................................4
List of character codes ....................................................................................................................6
Error messages displayed by the entry-error location detection functionality ...............................7
PART 2: Filters
2. Filters 9
show access-filter .........................................................................................................................10
clear access-filter ..........................................................................................................................16
3. Access List Logging 19
show access-log ............................................................................................................................20
clear access-log .............................................................................................................................22
show access-log flow ....................................................................................................................23
clear access-log flow ....................................................................................................................28
dump access-log ...........................................................................................................................29
restart access-log ..........................................................................................................................30
debug access-log ...........................................................................................................................32
no debug access-log ......................................................................................................................34
PART 3: QoS
4. QoS 35
show qos-flow ..............................................................................................................................36
clear qos-flow ...............................................................................................................................42
show qos queueing .......................................................................................................................44
clear qos queueing ........................................................................................................................55
show qos queueing distribution ....................................................................................................57
clear qos queueing distribution .....................................................................................................65
show qos queueing interface ........................................................................................................68
clear qos queueing interface .........................................................................................................72
show qos queueing to-cpu ............................................................................................................74
clear qos queueing to-cpu .............................................................................................................79
show shaper ..................................................................................................................................81

viii
clear shaper .................................................................................................................................. 87
show shaper <port list> ............................................................................................................... 88
clear shaper <port list> ................................................................................................................ 94
PART 4: Layer 2 Authentication
5. IEEE802.1X 97
show dot1x statistics .................................................................................................................... 98
show dot1x ................................................................................................................................. 103
clear dot1x statistics ................................................................................................................... 112
clear dot1x auth-state ................................................................................................................. 114
reauthenticate dot1x ................................................................................................................... 117
restart dot1x ................................................................................................................................ 119
dump protocols dot1x ................................................................................................................. 121
show dot1x logging .................................................................................................................... 122
clear dot1x logging ..................................................................................................................... 131
6. Web Authentication 133
set web-authentication user ........................................................................................................ 134
set web-authentication passwd ................................................................................................... 136
set web-authentication vlan ........................................................................................................ 138
remove web-authentication user ................................................................................................ 139
show web-authentication user .................................................................................................... 141
show web-authentication login .................................................................................................. 143
show web-authentication logging .............................................................................................. 145
show web-authentication ............................................................................................................ 160
show web-authentication statistics ............................................................................................. 164
clear web-authentication logging ............................................................................................... 167
clear web-authentication statistics ............................................................................................. 168
commit web-authentication ........................................................................................................ 169
store web-authentication ............................................................................................................ 171
load web-authentication ............................................................................................................. 173
clear web-authentication auth-state ............................................................................................ 175
restart web-authentication .......................................................................................................... 177
dump protocols web-authentication ........................................................................................... 179
set web-authentication html-files ............................................................................................... 180
clear web-authentication html-files ............................................................................................ 183
show web-authentication html-files ........................................................................................... 184
7. MAC-based Authentication 187
show mac-authentication login .................................................................................................. 188
show mac-authentication logging .............................................................................................. 190
show mac-authentication ............................................................................................................ 203
show mac-authentication statistics ............................................................................................. 206
clear mac-authentication auth-state ............................................................................................ 208
clear mac-authentication logging ............................................................................................... 210
clear mac-authentication statistics ............................................................................................. 211
set mac-authentication mac-address ........................................................................................... 212
remove mac-authentication mac-address ................................................................................... 214
commit mac-authentication ........................................................................................................ 216
show mac-authentication mac-address ....................................................................................... 218
store mac-authentication ............................................................................................................ 220
load mac-authentication ............................................................................................................. 222
restart mac-authentication .......................................................................................................... 224
dump protocols mac-authentication ........................................................................................... 225

ix
8. Authentication VLANs [OP-VAA] 227
show fense server [OP-VAA] .....................................................................................................228
show fense statistics [OP-VAA] .................................................................................................233
show fense logging [OP-VAA] ...................................................................................................240
clear fense statistics [OP-VAA] ..................................................................................................243
clear fense logging [OP-VAA] ...................................................................................................244
restart vaa [OP-VAA] .................................................................................................................245
dump protocols vaa [OP-VAA] ..................................................................................................247
PART 5: Security
9. DHCP Snooping 249
show ip dhcp snooping binding ..................................................................................................250
clear ip dhcp snooping binding ...................................................................................................253
show ip dhcp snooping statistics ................................................................................................255
clear ip dhcp snooping statistics .................................................................................................257
show ip arp inspection statistics .................................................................................................258
clear ip arp inspection statistics ..................................................................................................260
show ip dhcp snooping logging ..................................................................................................261
clear ip dhcp snooping logging ...................................................................................................274
restart dhcp snooping ..................................................................................................................275
dump protocols dhcp snooping ...................................................................................................277
PART 6: High Reliability Based on Redundant Configurations
10. Redundancy of BCUs, CSUs, and MSUs 279
inactivate standby .......................................................................................................................280
activate standby ..........................................................................................................................282
redundancy force-switchover .....................................................................................................283
synchronize .................................................................................................................................285
11. GSRP 289
show gsrp ....................................................................................................................................290
show gsrp aware .........................................................................................................................302
clear gsrp ....................................................................................................................................304
set gsrp master ............................................................................................................................307
clear gsrp port-up-delay ..............................................................................................................309
clear gsrp forced-shift .................................................................................................................311
restart gsrp ..................................................................................................................................313
dump protocols gsrp ...................................................................................................................315
12. VRRP 317
show vrrpstatus (IPv4) ................................................................................................................318
clear vrrpstatus (IPv4) ................................................................................................................331
swap vrrp (IPv4) .........................................................................................................................333
show vrrpstatus (IPv6) ................................................................................................................336
clear vrrpstatus (IPv6) ................................................................................................................349
swap vrrp (IPv6) .........................................................................................................................351
show track (IPv4) .......................................................................................................................354
show track (IPv6) .......................................................................................................................358

x
PART 7: High Reliability Based on Network Failure Detection
13. IEEE 802.3ah/UDLD 363
show efmoam ............................................................................................................................. 364
show efmoam statistics .............................................................................................................. 367
clear efmoam statistics ............................................................................................................... 370
restart efmoam ............................................................................................................................ 371
dump protocols efmoam ............................................................................................................. 373
14. L2 Loop Detection 375
show loop-detection ................................................................................................................... 376
show loop-detection statistics .................................................................................................... 379
show loop-detection logging ...................................................................................................... 382
clear loop-detection statistics ..................................................................................................... 384
clear loop-detection logging ....................................................................................................... 386
restart loop-detection .................................................................................................................. 387
dump protocols loop-detection ................................................................................................... 389
15. CFM 391
l2ping ......................................................................................................................................... 392
l2traceroute ................................................................................................................................. 395
show cfm .................................................................................................................................... 398
show cfm remote-mep ................................................................................................................ 402
show cfm fault ............................................................................................................................ 408
show cfm l2traceroute-db ........................................................................................................... 411
show cfm statistics ..................................................................................................................... 416
clear cfm remote-mep ................................................................................................................ 421
clear cfm fault ............................................................................................................................ 423
clear cfm l2traceroute-db ........................................................................................................... 425
clear cfm statistics ...................................................................................................................... 426
restart cfm .................................................................................................................................. 428
dump protocols cfm ................................................................................................................... 430
PART 8: Remote Network Management
16. SNMP 431
show snmp .................................................................................................................................. 432
show snmp pending .................................................................................................................... 437
snmp lookup ............................................................................................................................... 439
snmp get ..................................................................................................................................... 440
snmp getnext .............................................................................................................................. 442
snmp walk .................................................................................................................................. 444
snmp getif ................................................................................................................................... 446
snmp getroute ............................................................................................................................. 448
snmp getarp ................................................................................................................................ 451
snmp getforward ........................................................................................................................ 453
snmp rget .................................................................................................................................... 456
snmp rgetnext ............................................................................................................................. 458
snmp rwalk ................................................................................................................................. 460
snmp rgetroute ............................................................................................................................ 462
snmp rgetarp ............................................................................................................................... 465
17. sFlow 467
show sflow ................................................................................................................................. 468
clear sflow statistics ................................................................................................................... 471

xi
restart sflow ................................................................................................................................472
dump sflow .................................................................................................................................473
PART 9: Management of Neighboring Device Information
18. LLDP 475
show lldp ....................................................................................................................................476
show lldp statistics ......................................................................................................................482
clear lldp .....................................................................................................................................484
clear lldp statistics ......................................................................................................................485
restart lldp ...................................................................................................................................486
dump protocols lldp ....................................................................................................................488
19. OADP 489
show oadp ...................................................................................................................................490
show oadp statistics ....................................................................................................................495
clear oadp ....................................................................................................................................497
clear oadp statistics .....................................................................................................................499
restart oadp .................................................................................................................................501
dump protocols oadp ..................................................................................................................503
Index 505

1
PART 1: Reading the Manual
Chapter
1. Reading the Manual
Command description format
Specifiable values for parameters
List of character codes
Error messages displayed by the entry-error location detection functionality

1. Reading the Manual
2
Command description format
Each command is described in the following format:
Function
Describes the purpose of the command.
Syntax
Defines the input format of the command. The format is governed by the following rules:
1. Parameters for setting values or character strings are enclosed in angle brackets (<>).
2. Characters that are not enclosed in angle brackets (<>) are keywords that must be typed
exactly as they appear.
3. {A|B} indicates that either Aor Bmust be selected.
4. Parameters or keywords enclosed in square brackets ([]) are optional and can be omitted.
5. For details on the parameter input format, see Specifiable values for parameters.
Input mode
Indicates the mode required to enter the command.
Parameters
Describes in detail the parameters that can be set by the command. For details on the behavior of
a command when all omissible parameters are omitted, see Operation when all parameters are
omitted.
For details on the behavior when only a specific parameter is omitted, see Operation when this
parameter is omitted. For details on the behavior when each parameter is omitted, see Operation
when each parameter is omitted.
Example
Provides examples of appropriate command usage.
Display items
Describes the display items generated by the example.
The following table describes the Date display items displayed immediately after the command in
the example is executed.
Table 1-1: Display of the time the command was received
The Switch assigns names to corresponding interfaces set by configuration. If <interface name>
is shown in Display items, the Switch displays any of the interface names shown in the following
table.
Table 1-2: List of interface names assigned for input format
Item Displayed information
Date yyyy/mm/dd hh:mm:ss timezone year/month/day hour:minute:second time zone
The time the command was accepted is displayed.
Input format Interface name <interface name>
interface gigabitethernet geth1/1
The numeric values represent <nif no.>/<port no.>.

1. Reading the Manual
3
Impact on communication
If a setting has an impact on communication, such as interruptions to communication, that impact
is described here.
Response messages
Lists the response messages that can be displayed after execution of the command.
Note that error messages displayed by the entry-error location detection functionality are not
described here. For details on these messages, see Error messages displayed by the entry-error
location detection functionality.
The Switch assigns names to corresponding interfaces set by configuration. If <interface name>
is shown in Response messages, the Switch displays any of the interface names listed in
Table 1-2: List of interface names assigned for input format.
Notes
Provides cautionary information on using the command.
interface tengigabitethernet tengeth1/1
The numeric values represent <nif no.>/<port no.>.
interface vlan <vlan id> VLAN0002
The last four digits represent <vlan id>.
interface loopback loopback0
The numeric value represents <loopback id>.
interface null 0 null0
interface mgmt 0 MGMT0
interface async 1 ASYNC1
Input format Interface name <interface name>

1. Reading the Manual
4
Specifiable values for parameters
The following table describes the values that can be specified for parameters.
Table 1-3: Specifiable values for parameters
Range of <nif no.> and <port no.> values
The following tables list the range of parameter <nif no.> and <port no.> values.
Table 1-4: Range of <nif no.> values
Table 1-5: Range of <port no.> values [AX6700S] [AX6600S]
Parameter type Description Input example
Name For the names of access lists, alphabetic characters
can be used for the first character, and
alphanumeric characters, hyphens (-), underscores
(_), and periods (.) can be used for the second and
subsequent characters.
Note that if the command input format permits
specification of either a name, or a command name
and parameters (or keywords), and you specify a
name that is identical to a command name or a
parameter (or keyword), the system assumes that
the command or the parameter (or keyword) has
been entered.
ip access-list standard inbound1
MAC address,
MAC address mask
Specify these items in hexadecimal format,
separating 2-byte hexadecimal values by periods
(.).
1234.5607.08ef
0000.00ff.ffff
IPv4 address,
IPv4 subnet mask
Specify these items in decimal format, separating
1-byte decimal values by periods (.).
192.168.0.14
255.255.255.0
Wildcard mask The same input format as IPv4 addresses. The set
bits in an IPv4 address represent an arbitrary value.
255.255.0.0
IPv6 address Specify this item in hexadecimal format,
separating 2-byte hexadecimal values by colons
(:).
3ffe:501:811:ff03::87ff:fed0:c7e0
fe80::200:87ff:fe5a:13c7
IPv6 address with an
interface name (for a
link-local address only)
Specify a percent (%) between an IPv6 address and
an interface name. Only link-local IPv6 addresses
can be used as this parameter type.
fe80::200:87ff:fe5a:13c7%VLAN0001
# Model Range of <nif no.> values
1 AX6708S 1 to 8
2 AX6604S 1 to 4
3 AX6608S 1 to 8
4 AX6304S 1 to 4
5 AX6308S 1 to 8
# NIF type name abbreviation Range of <port no.> values
1 NK1G-24T 1 to 24
2 NK1G-24S 1 to 24