Alba LCD32947DVDHDS User manual

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Issue 1 - 9/2/11
32” Combination LCD TV/DVD
Installation & Operating Instructions - Please keep for future reference
529/9201
APPROVED
IMPORTANT - Please read these instructions fully before installing or operating
These instructions contain important information which will help you get the best from your
television and ensure safe and correct installation and operation.
For any help concerning set up and use of your TV please call the
Customer Helpline: 0845 604 0105
Lines open: 9am - 8pm Monday to Saturday and 10am - 4pm Sunday
LCD32947DVDHDS
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 1 01.12.2011 17:35:35
0345 604 0105

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Contents
Contents 2
Contents 3-6
Preparation 4
Intended Use 4
Power source 4
Positioning the TV 4
Power cord and plug 4
Moisture and Water 5
Ventilation 5
Heat sources and Flames 5
Headphone Volume 5
Wall Mounting (optional) 5
LCD Screen 5
Cleaning 5
Handling Discs 5
Cleaning Discs 5
Batteries 5
Replacement Parts 6
Servicing 6
Taking out of service and storing 6
Connection to a Television Distribution System
(Cable TV etc.) from Tuner 6
Symbols in this Instruction Book 6
Getting Started 7-17
TV - Features 8
DVD - Features 8
Viewing remote control - TV 9
Viewing remote control - DVD 10
Getting Started 11
Attaching the Stand 11
Getting Started 12
TV - Control buttons (left side) 12
DVD - Control buttons (right side) 12
Aerial connection 13
Power connection 13
Remote control - Inserting batteries 13
Wall Mounting 13
Switching the TV On and Off 13
Switching the TV On 13
Switching the TV Off 13
Operation using TV control buttons 14
Operation using Remote control buttons 14
How to watch a DVD 15
Notes on DVD Playback 15
Getting Started 16
DVD Controls 16
Initial set up 17
Source Selection 17
Information Banner 17
Connections 18-22
Back connections explained 18
Left side connections explained 19
HDMI Connections 20
SCART Connections 20
VGA Connections 20
Side AV Connections 21
Using a Conditional Access Module 21
USB Connections 22
Basic Features 23-31
How to navigate menus - Selecting source 23
Electronic programme guide (EPG) 23
General Operation 24
Displaying Subtitles 24
Zoom Modes 24
Using Main Menu Screen 24
Configuring Date/Time Settings 24
Source Settings 24
Audio Language 24
Basic Features 25
Navigating Channel List 25
Moving a Channel 25
Deleting a Channel 25
Renaming a Channel 25
Locking a Channel 25
Sorting Channel List 25
DVD Mode Disc Playback 26
Environmental Information 26
Language Settings 27
Language Settings 27
Other Functions and Features 28
Favourite Mode 28
Conditional Access 28
Setting Sleep Timer 28
Setting Programme Timers 28
Editing a Timer 28
Deleting a Timer 28
Picture Controls 29
Configuring Picture Settings 29
Operating Picture Settings Menu Items 29
Picture Settings Menu Items 29
PC Picture Settings Operation 29
Sound and Source Settings 30
Configuring Sound Settings 30
Sound Settings Menu Items 30
Configuring Source Settings 30
Other Controls 31
Operation 31
Other Settings Menu Items 31
2
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 2 01.12.2011 17:35:37

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Model number
ALBA DVB-T LCD32947DVDHDS
Contents
Advanced Features 32-36
Media Browser 32
Starting Media Browser 32
Media Browser Configuration 32
Operation 32
View Style 32
Slide Show Interval 32
Show Subtitle 32
Subtitle Language 32
Subtitle Position 32
Subtitle Font Size 32
Loop / Shuffle during Playback 32
Media Browser - continued 33
Viewing Videos via USB 33
Video Playback Screen 33
Subtitle Time Correction 33
Viewing Photos via USB 33
Displaying Photos in Slideshow Mode 33
Playing Music via USB 33
Setting the channels 34
Accessing Installation Menu 34
Automatic Channel Scan (Retune) 34
Manual Channel Scan 34
Analogue Fine Tune 34
First Time Installation 34
Clear Service List 34
Parental Control 35
DVD Mode Configuration 36
TV Type 36
Language Setup 36
OSD LANG 36
AUDIO 36
DISC MENU 36
SUBTITLE 36
DEFAULT 36
DOWNMIX 36
SURROUND 36
STEREO 36
PARENTAL 36
PASSWORD 36
SPDIF OUTPUT 36
Other Information 37-40
Teletext 37
Analogue Teletext 37
Digital Teletext (for the UK only) 37
Specifications 38
Other Information 39
Plug replacement - UK and Ireland only 39
Other Information 40
Product Support 41-47
Trouble shooting 41
DVD Mode Supported file formats 42
Disposal information 42
Compatible disc types 43
Supported DVI Resolutions 43
Supported File Formats for USB Mode 44
AV and HDMI Signal Compatibility (Input Signal
Types) 44
PC Input Typical Display Modes 45
Definition of important terms - DVD 46
Definition of important terms - TV 47
Software Upgrade 48
Licence Notifications 48
Guarantee 49
3
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 3 01.12.2011 17:35:37

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Preparation
Place the device on a solid even surface. For ventilation,
leave a free space of at least 10 cm all around the
set. To prevent any fault and unsafe situations, do not
place any objects on top of the set. Use this device in
moderate climates.
Operation temperature and operation humidity:
5ºC up to 45ºC, 85% rel. humidity max. (not blocking
ventilation openings).
Intended Use
This device is used to receive and display TV
programmmes, as well as to play CDs and DVDs (see
“This device compatible disc types”).The different
connection options make an additional expansion of
the reception and display sources possible (various
external devices). This device is only suitable for dry
interior use. This appliance is intended solely for private
domestic use and may not be used for industrial and
commercial purposes. We exclude liability in principle,
if the device is not used as intended, or unauthorized
modifications have been made. To operate your LCD TV
in extreme ambient conditions may cause the damage
of the device.
WARNING: Never let people (including children)
with physical, sensory or mental abilities or lack of
experience and / or knowledge unsupervised use
electrical device!
Children may not recognize dangers right! The
swallowing of batteries can be fatal. Keep batteries
always out of reach of small children. If a battery is
swallowed, seek immediate medical attention. Keep
the packaging films out of reach of children, there is a
risk of suffocation.
Power source
The TV should be operated only from a 220-240V•
AC, 50 Hz outlet.
• Warning: Do not leave your TV in standby or
operating mode when you leave your house.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock of persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Positioning the TV
For ventilation, please leave a clear space of at•
least 10cm all around the TV.
Do not• block the ventilation openings.
Do not• place the TV on sloping or unstable
surfaces, the TV may tip over.
To prevent damage to the TV,• do not place any
objects on top of the TV.
Only use the TV in moderate climates.•
Power cord and plug
The power cord plug should be easily accessible.•
In case of storms and lightning, when going on
holiday, or when the TV is not used for a long
period of time disconnect the power cord from the
mains power socket.
The mains plug is used to disconnect TV set from•
the mains and therefore it must remain readily
accessible.
Do not• place the TV, furniture, etc. on the power
cord or pinch the cord.
Handle the power cord by the plug,• do not unplug
the TV by pulling the power cord.
Never touch the power cord/plug with wet hands as•
this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with•
other cords.
Power cords should be placed in such a way•
that they are not likely to be stepped on or driven
over.
A damaged power cord/plug can cause fire or give•
you an electric shock. When damaged it must be
replaced, this should only be done by qualified
personnel.
4
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 4 01.12.2011 17:35:37

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Moisture and Water
Do not• use this TV in a humid or damp place (avoid
bathrooms, the sink in the kitchen, etc.
Do not• expose this TV to rain or water, as this may
be dangerous.
Do not• place objects filled with liquids, such as
flower vases, on top of the TV. Avoid from dripping
or splashing.
If any solid object or liquid falls into the cabinet,•
unplug the TV and have it checked by qualified
personnel before operating it any further.
Ventilation
The slots and openings on the TV set are intended•
for ventilation and to ensure reliable operation.
To prevent overheating, these openings must not•
be blocked or covered in anyway.
Heat sources and Flames
Do not• expose the TV to direct sunlight or other
heat sources.
The TV should not be placed near to•
open flames and sources of intense
heat such as an electric heater.
Ensure that no open flame sources,•
such as lighted candles, are placed on top of the
TV.
Headphone Volume
Excessive sound pressure from earphones•
and headphones can cause hearing loss,
please take care.
Wall Mounting (optional)
To prevent injury, this TV must be securely attached•
to the wall in accordance with the installation
instructions (if the option is available).
LCD Screen
Occasionally, a few non-active pixels may appear•
on the screen as a fixed blue, green or red
point. Please note that this does not affect the
performance of your product.
Take care not to scratch the screen with fingernails•
or other hard objects.
Cleaning
Before cleaning, unplug the TV from the wall•
socket.
Do not• use liquid or aerosol cleaners. Only use a
soft, dry cloth.
Handling Discs
To keep the disc clean,•
only handle the disc by
its edge. Do not touch
the surface.
Do not• stick paper or
tape on the disc.
If the disc is contaminated with any substance like•
glue, remove before using it.
Do not• expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature can
rise quickly and damage the disc.
After playing, store the disc in its case.•
Cleaning Discs
Before playing, clean the disc•
with a cleaning cloth. Wipe the
disc from the centre out.
Do not• use solvents such as
benzine, thinner, commercially
available cleaners or anti-static spray intended
for vinyl LPs.
Batteries
• Warning: Incorrect installation of
batteries may cause battery leakage
and corrosion, resulting in damage to
the remote control.
Do not• mix old and new batteries, or
batteries of different types.
Do not• dispose of batteries in a fire.
Do not• dispose of batteries with normal household
waste, take to a local recycling centre.
CAUTION: Insert the batteries / rechargeable
batteries in the correct polarity. Don´t try to recharge
non rechargeable batteries and under no circumstances
throw them into fire. Danger of explosion. Do not use
unequal batteries (old and new, Alkaline and carbon,
etc.) simultaneously. If you will not use the device for
a long time, remove the batteries and store the device
in a dry and dust free place. Improper use of batteries
may cause an explosion or leakage. If the batteries have
leaked, use gloves and clean the appliance thoroughly
with a dry cloth! Batteries should not be exposed to
heat, such as sunshine, fire or the like.
5
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 5 01.12.2011 17:35:39

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
WARNING
This is a class A product. In a domestic
environment it could cause radio
interference, in which case it may
require the user to take appropriate
action.
Replacement Parts
When replacement parts are required, make sure that
the service technician has used replacement parts,
which are specified by the manufacturer or have the
same specifications as the original one. Unauthorised
substitutions may result in fire, electrical shock or other
hazards.
Servicing
• Warning: Risk of exposure to radiation
from class 1/class 3b visible and invisible laser
beams. Do not open the TV and stare directly
into beam.
• Warning: Risk of electric shock, do not attempt
to repair, service or modify this TV yourself. Contact
the manufacturer, their approved service agent or
the Customer Helpline: 0845 604 0105.
Taking out of service and storing
Unplug the TV from the mains and pack the TV in an
appropriate cardboard box. Remove the batteries from
the remote control and pack the remote control to the
TV set.
NOTE: The TV set should be stored in a dry and
dust-free room.
Connection to a Television Distribution
System (Cable TV etc.) from Tuner
Device connected to the protective earthing of the
building installation through the mains connection or
through other apparatus with a connection to protective
earthing-and to a television distribution system using
coaxial cable, may in some circumstances create a
fire hazard.
Connection to a cable distribution system has therefore
to be provided through a device providing electrical
isolation below a certain frequency range (galvanic
isolator, see EN 60728-11).
Safety Information
IMPORTANT - Please read these instructions fully before installing or operating
Symbols in this Instruction Book
The following symbols are used in the Instruction
Book as a marker for restrictions and precautions and
safety instructions. Note such information for security
reasons.
WARNING
If you do not pay attention to such a marked warning, it
can cause serious injury or death. Note these warnings
strictly, in order to ensure a safe operation.
CAUTION
Such a precaution is marked, you should take up
or note, to avoid injury or property damage. Note
these instructions strictly, in order to ensure a safe
operation.
IMPORTANT
Warnings on the appliance and restrictions are displayed
like this. Read this information strictly in order to operate
the system correctly and avoid damage.
NOTE: Information about the operation and
additional explanations are marked like this. To be
aware of such information is recommended to ensure
that the functions can be used optimally.
6
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 6 01.12.2011 17:35:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
The Argos Technical Helpline is here to help
Technical experts are available 7 days a week
• Simple help and advice on setting up your digital
equipment (image).
• Guidance on connecting other devices to your
television such as a DVD player, Sky, home cinema
system or a games console.
• Order spare parts, including that lost remote
control.
• Any other technical issues you may need
assistance with.
Call us today: 0845 604 0105
Local call rates applies*
Lines open 9am-8pm Monday to Saturday and 10am-4pm Sunday.
*Calls to Argos enquiry lines may attract a charge and set up fee from residential
lines depending on your call plan/tariff. Mobile and other providers costs may vary,
see www.bt.com/pricing for details.
For Security and training purposes, telephone calls to and from customer service
centres maybe recorded and monitored. Calls from Republic of Ireland will attract
international call charges.
7
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 7 01.12.2011 17:35:40
0345 604 0105

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Remote controlled colour LCD TV.•
Fully integrated Terrestrial digital TV (DVB-T - MPEG2,•
MPEG4)
HDMI connectors for digital video and audio.•
This connection is also designed to accept high
definition signals.
USB input.•
1000 programmes (analogue+digital).•
OSD menu system.•
Integrated tuner MPEG 2, MPEG 4 compatible.•
Scart socket for external devices (such as video,•
video games, audio set, etc.).
Stereo sound system. (German+Nicam)•
Teletext, fastext, TOP text.•
Headphone connection.•
Automatic programming system.•
Forward or backward manual tuning.•
Sleep timer / Child lock.•
Automatic sound mute when no transmission.•
NTSC playback.•
AVL (Automatic Volume Limiting).•
Auto power down.•
PLL (Frequency Search).•
PC input.•
Plug&Play for Windows 98, ME, 2000, XP, Vista,•
Windos 7.
Game Mode•
Remote Control
Batteries: 2 x AAA
Instruction Book
Quick Start Guide
Getting Started
TV - Features
Accessories included
• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG
playback.
• NTSC / PAL playback (according to disc
content).
• LPCM audio via coaxial and optical digital audio
outputs (optional).
• Multi-Audio (up to 8) support (according to disc
content).
• Multi-Subtitle (up to 32) support (according to
disc content).
• Multi-Angle (up to 9) support (according to disc
content).
• 8 level parental control.
• Fast forward and rewind - 5 different speeds:
2x, 4x, 8x, 16x, 32x.
• Slow motion playback - 4 different speeds:
1/2x, 1/4x, 1/8x, 1/16x forward.
• Frame by frame forward playback.
• Search Mode
• Repeat
• Coaxial audio output (optional).
• Copied disks may be incompatible.
DVD - Features
Optional Accessories
Wall mount bracket
NOTE:You should check the accessories after
purchasing. Make sure that each accessory is
included.
8
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 8 01.12.2011 17:35:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started - TV
Viewing remote control - TV
Standby1.
Image size2.
Sleep timer3.
Number buttons4.
Return / Exit / TXT Index5.
Cursor up / TXT up page6.
Cursor left7.
Programme up / Page down (in DTV8.
mode)
Programme down / Page up (in DTV9.
mode)
Mono-Stereo / Dual I-II10.
Swap11.
Electronic programme guide12.
(in DTV mode)
Info / TXT reveal13.
Source selection14.
Picture mode selection15.
Red / Sound16.
Green / Picture17.
Yellow / Feature / Current language18.
Blue/Install19.
Menu20.
Cursor right / TXT Sub page21.
OK / Select22.
Cursor down / TXT Down page23.
Volume up24.
Volume down25.
Subtitle (in DTV mode) / TXT Subtitle26.
Mute27.
Teletext / Mix28.
FAV (Favourite Selection) (in DTV29.
mode)
Media Player buttons30.
NOTE: Remote Control buttons that are not indicated
with a number can not be used in TV mode.
The Remote Control range is approximately
7m / 23ft.
MENU
/
INFO
EPG
FAV
PRESETS
SUBTITLE
RETURN
SOURCE
SLEEP SCREEN
LANG.
9
1
15
2
4
5
3
6
7
8
9
10
29
11
12
14
16
17
18
19
20
21
22
23
24
25
26
27
28
30
13
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 9 01.12.2011 17:35:40

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
MENU
/
INFO
EPG
FAV
PRESETS
SUBTITLE
RETURN
SOURCE
SLEEP SCREEN
LANG.
10
Getting Started
1
2
3
6
8
4
9
10
12
13
14
15
16
17
18
19
21
23
24
11
25
520
722
Viewing remote control - DVD
Standby1.
Number buttons2.
Return back3.
Language selection (Set language)4.
Display time / DVD menu5.
Clear6.
Stop7.
No function8.
Rapid Reverse9.
Rapid advance10.
Info11.
Zoom12.
Repeat13.
Root14.
Title15.
Menu16.
Navigation Buttons17.
OK / Select18.
Subtitle19.
Angle20.
Search mode21.
Play22.
Pause23.
Skip next24.
Skip previous25.
NOTE: Remote Control buttons that are not indicated
with a number can not be used in DVD mode.
The Remote Control range is approximately
7m / 23ft.
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 10 01.12.2011 17:35:42

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
Attaching the Stand
1. Stand is placed on a flat surface (fig.1).
2. To install the TV on the wall, first of all, foot
assembly should be removed. Unscrew the 4 screws
that attach the foot assembly to the panel and
remove the foot assembly from the panel (fig.2).
fig.1
fig.2
11
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 11 01.12.2011 17:35:43

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Standby-LED
1
2
3
4
12
Getting Started
TV - Control buttons (left side)
1. Standby ( ) button
Turns the TV on when in standby mode or turns
the TV off into standby mode.
2. TV/AV button
Changes the operation of “Up” and “Down”
buttons.
3. Programme Up/Down buttons
Moves up/down a channel.
4. Volume Up/Down buttons
Increases/decreases the volume.
NOTE:If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.
NOTE:Press “” / “ ”buttons at the same
time to view main menu.
DVD - Control buttons (right side)
5. Play / Pause ( / ) button
Plays / pauses the disc. When DVD menu (root
menu) is active, this button functions as “button
select” (selects the highlighted item in menu) if this
is not prohibited by the disc).
6. Stop / Eject ( / ) button
Stops the disc playing / Ejects or Loads the disc.
7. Disc loader
NOTE: You cannot eject the disc via the remote
control. To eject while playing a file; you should press
the STOP button “ / ” (on the TV) three times.
6
7
5
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 12 01.12.2011 17:35:44

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
Aerial connection
Connect the “aerial” or “cable TV” plug to AERIAL
INPUT (ANT.) socket located on the back of the
TV (fig.1).
Switching the TV On and Off
Switching the TV On
With power cord plug connected to the mains power
socket, the TV is in ‘Standby’ mode.
To switch the TV on from standby mode:
Connect the power cord to the 220-240V AC 50 Hz.
Then the standby LED lights up. (The led will blink
during the standby On/Off)
To switch on the TV from standby mode either:
a. Press the “ ” button, P+ / P- or a numeric button on
the remote control.
b. Press the “ ”, - or + button of the TV.
By either method the TV will switch on.
AAA/R3 x 2
Batteries
Switching the TV Off
Press the “ ” button on the remote control or press
the “ ” switch on the TV, the TV will switch to standby
mode.
To turn off the TV completely, remove the power
cord plug from the mains power socket.
NOTE: When the TV is in standby mode, the standby
LED can blink to indicate that features such as Standby
Search, Over Air Download or Timer is active.
NOTE: If you switch on your TV via P+/- buttons on
the remote control or +/- on the TV set, the programme
that you were watching last will be reselected.
HDMI 1
HDMI 2
SPDIF
Coax.OUT
HDMI 1
HDMI 2
SPDIF
Coax.OUT
fig.1
fig.2
Power connection
IMPORTANT :The TV set is designed to operate on
220-240V AC, 50 Hz.
Please note: After unpacking, allow the TV to reach
ambient room temperature before connecting the TV
to the mains power socket.
Connect the power cord plug to the mains power
socket.
The LED on the front of the TV then lights up, this
indicates that the TV is in ‘Standby’ mode.
Remote control - Inserting batteries
Remove the battery cover on the back of the remote
control, gently push down and pull backwards at the
same time as shown.
Insert two AAA/R3 or equivalent type batteries. Ensure
the batteries are inserted the correct way and replace
the battery cover (fig.2).
NOTE: When the remote control is not going to
be used for long periods of time, the batteries should
be removed. Otherwise the remote control may be
damaged, caused by battery leakage and corrosion.
Wall Mounting
When wall mounting please ensure you use a compatible
wall mount (not supplied). This TV conforms to the VESA
mounting specifications and is 200 x 200 mm.
13
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 13 01.12.2011 17:35:45

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
14
Getting Started
Operation using TV control buttons
The main menu OSD (On Screen Display) cannot
be displayed using the TV control buttons.
The “ ”/“ ” buttons will function as volume
up/down as default. Even if you set other functions
for these buttons, the “ ”/“ ” buttons will
return to volume control after a short while.
Volume Setting
Press “ ” button to decrease volume or “ ”
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Press “P/CH +” button to select the next
programme or “P/CH -” button to select the
previous programme.
AV Mode
Hold the TV/AV button for a few seconds, the
“Source” OSD will be displayed.
Operation using Remote control buttons
The remote control is designed to control all the
functions of the model you selected.
Volume Setting
Press “V +” button to increase the volume. Press
“V -” button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
Press P- button to select the previous programme.
Press P+ button to select the next programme.
Programme Selection (Direct Access)
Press number buttons on the remote control to
select programmes between 0 and 9. The TV will
switch to the selected programme.
To select programmes between 10-500 (IDTV)
or 10-199 (analogue), press the number buttons
consecutively.
MENU
/
INFO
EPG
FAV
PRESETS
SUBTITLE
RETURN
SOURCE
SLEEP SCREEN
LANG.
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 14 01.12.2011 17:35:46

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105 15
Getting Started
How to watch a DVD
1. Press the Power Button “” on the TV or remote
control.
2. Switch to DVD source using the “SOURCE”
button on the remote control.
3. Insert a disc into the loader.
The disc MUST be facing you when looking at the
TV screen (fig.3).
Most discs will be automatically loaded and play
will start automatically if the disc does not have
any menus recorded on it.
If play does not start automatically, press the play
button “ ” on the remote control, or the play button
“/ ” on the right side of the TV.
A menu may appear on the TV screen after a few
moments or the film may start immediately after the
Film/TV Company introduction. This will depend on
the disc content and may differ on each disc.
NOTE: Steps 4 and 5 are only available when a
menu is recorded on the disc.
4. Press the navigation buttons “ ” , “ ” ,“ ” or
“ ” or the number button/s to select the required
title.
5. Press the OK button. The selected item starts
to play.
Notes on DVD Playback
a. No sound will be heard during Rapid advance
or Rapid reverse.
b. No sound will be heard during Slow motion
play.
c. Reverse Slow motion play is not available.
d. In some cases, the subtitle language will not be
changed immediately to the selected one.
e. When the preferred language will not select,
even after pressing the button several times, it
means the language is not available on the disc.
f. When the DVD player is restarted or the disc
is changed, the subtitle selection is automatically
changed back to the initial settings.
g. If a language is selected that is not supported by
the disc, the subtitle language will automatically be
set to the disc’s priority (default) language.
h. Usually a ‘circulation’ will happen while switching
to another language, this means you can cancel the
subtitle by pressing the same button a number of
times until “Subtitle Off” appears on the screen.
i. When the power is turned on or the disc is
removed, the language heard will be the one
selected at the initial settings.
j. Some DVDs may not contain root and/or title
menus.
k. Reverse stepping is not available.
l. For reference: If you attempt to enter a number
greater than the total time of the current title, the
time search box disappears and “Input Invalid ”
message appears on top-left corner of screen.
m. The slide show is disabled when the ZOOM
mode is on.
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 15 01.12.2011 17:35:47

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Buttons
on Remote
Control
DVD Playback Movie Playback Picture
Playback
Music Playback
Play Play Play Play
Pause Pause Pause Pause
Stop Stop Stop Stop
/ Skip
backward / forward
Skip
backward / forward
Previous / Next Previous / Next
/ Shifts the zoomed picture left or right (if available).
/ Highlights a menu item / Shifts the zoomed picture up or down (if available).
/ Rapid advance / Rapid reverse
ANGLE Views the scene from different angles (if
available)
Changes slide effect
(depends on the
content)
X
CClears digit (if available).
DISPLAY Displays time / Views main setup menu
INFO Time counter mode selection (during playback). Press repeatedly to switch between modes.
LANG. Auto language X X
MENU Displays TV menu.
OK / SELECT Enter / View / Play
REPEAT Displays repeat options.
RETURN Returns back to the previous menu (if available).
ROOT Goes back to the root folder (if available).
SEARCH
MODE *
Direct selection of scenes or time. Selects the desired
file.
Selects the desired
file.
SUBTITLE Subtitle on-off.
Press repeatedly to switch between subtitle
ptions.
XX
SWAP Media source selection.
TITLE Displays disc menu
(if available).
Displays disc menu
(if available).
XX
MENU Zooms picture. Press repeatedly to switch between zoom options.
Other Functions – Button Combinations
(During playback)
+Slow forward
(+)+Sets slow forward speed
+Sets rapid advance speed
+Sets rapid reverse speed
+Confirms stop command
+Press repeatedly to advance
manually
Getting Started
DVD Controls
You can operate DVD, movie CD, music or picture CD’s content by using the correct buttons on your remote
control. Below are main functions of commonly used remote control buttons.
(*) You can switch to a title by pressing number
buttons directly. You need to press 0 and then digit
key to switch one digit titles (example: to select 5,
press 0 and 5).
16
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 16 01.12.2011 17:35:48

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
Getting Started
Initial set up
When turned on for the first time, language selection
message is displayed (fig.1). Press the “ ” or “
” button to highlight the required language, press OK
button to select. “First Time Installation” appears. Use“
” or “ ” button to set the required country, and press
“” button to select “Teletext Language”. Use “ ” or
“ ” button to set the “Teletext Language” and select
“Scan Encrypted” using “ ” or “ ” button. Set “Scan
Encrypted” using “ ” or “ ” button (fig.2).
Press OK button on the remote control to continue and the
confirmation screen will be displayed on the screen (fig.3).To
start automatic select Yes (to cancel select No), highlight
the item required using the “ ” or “ ” button and press
OK button to select. The search will start (fig.4).
IMPORTANT: Do not turn off the TV while
“First Time Installation” is in operation.
After all the available stations are stored, Channel List
will be displayed on the screen. If LCN (*) is available in
your country, a message appears on the screen which
asks you if you want to sort the channels according to
LCN. In some countries, the order of the channels is
arranged automatically by the broadcaster. This is called
logical channel number (LCN). If the selected country
has LCN support, the channels will be enumerated one
by one, beginning from number 1. You cannot move
any programme to a position after the last saved one.
If you try to do this, both programmes will change their
places. If LCN support is not available, you can move
the channels as you wish.
Press OK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Information Banner
Whenever you change channel using the P-/P+ buttons
or the numeric buttons, the TV displays the broadcast
picture along with an information banner at the bottom
of the screen. The information banner can be displayed
at any time while watching TV by pressing the INFO
button on the remote control (fig.5).
Hint: Not all channels broadcast the programme data. If
the name and time of the programme are not available,
then information banner will be displayed with blanks.
If the selected channel is locked, you must enter the
correct four-digit numeric code to view the channel
(default code is 0000). “Enter PIN” will be displayed on
the screen in such a case.
Source Selection
Press the SOURCE button on the remote control for
switching between the sources.
(fig.1)
(fig.2)
(fig.3)
(fig.4)
(fig.5)
17
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 17 01.12.2011 17:35:51

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
18
Connections
Back connections explained
1. SCART socket
Inputs or outputs for external devices. Connect the
SCART cable between the SCART socket on the
TV and the SCART socket on the external device
(decoder, VCR or DVD player) (see page 00).
NOTE: If an external device is connected via the
SCART socket, the TV will automatically switch to AV
mode. When receiving DTV channels (Mpeg4 H.264)
or while in Media Browser mode, output will not be
available via the scart socket.
2. HDMI Input
Connects a device that has an HDMI socket.
The TV can display High Definition pictures from
devices such as a High Definition Satellite Receiver
or DVD Player. These devices must be connected
via the HDMI sockets or Component Socket. No
sound connection is needed for an HDMI to HDMI
connection (see page 00).
3. PC Input (VGA)
Connects a personal computer to the TV. Connect
the PC cable between the PC INPUT on the TV and
the PC output on the PC. You can use the PC input
to allow YPbPr signal connection with a device that
has component output. Connect the YPbPr to PC
cable between the PC INPUT on the TV and the
component video outputs of the device.
4. RF Input (ANT.)
Connects to aerial (antenna) or cable TV. If you use
a decoder or a media recorder, you should connect
the aerial cable through the device to the TV with
an appropriate aerial cable (see page 00).
NOTE: When using the wall mounting kit (optional),
we recommend that you plug all your cables into the
back of the TV before mounting on the wall.
5. S/PDIF Coaxial Out
Outputs digital audio signals of the currently
watched source.
Use an SPDIF coaxial cable to trasfer audio
signals to a device that has S/PDIF input.
4
2
1
3
5
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 18 01.12.2011 17:35:53

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105 19
Connections
Left side connections explained
6. CI Slot
Used to insert a CI card. A CI card allows you
to view all the channels that you subscribe to.
For more information, see “Conditional Access”
section.
7. USB Input
To connect devices to the TV, providing fast data
exchange. USB will only function in DTV mode.
Use an SPDIF coaxial cable to trasfer audio signals
to a device that has S/PDIF input.
8. Video input
Video Input is used for connecting video signals of
external devices.Connect the video cable between
the VIDEO IN socket on the TV and the VIDEO
OUT jack on your device.
9. Audio input
Audio Inputs are used for connecting audio signals of
external devices. Connect the audio cable between
the AUDIO INPUTS on the TV and the AUDIO
OUTPUT jacks on your device.
NOTE:If you connect a device to the TV via
the VIDEO INPUT, you should also connect your
device with an audio cable to the AUDIO INPUTS
of the TV to enable audio.
10. Headphone
Headphone jack is used for connecting an
external headphone to the system. Connect to
the HEADPHONE jack to listen to the TV from
headphones (optional).
6
7
8
9
10
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 19 01.12.2011 17:35:54

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105
20
Connections
HDMI Connections
HDMI lets you enjoy high definition digital images
and high quality sound by connecting the TV to
external devices such as DVD players, set top
boxes or gaming equipment (fig.1).
Power off both the TV and the device before
making any connections.
For more information, refer to your device’s own
instruction book.
After making the connection, switch to HDMI 1 or
HDMI2 as a source, depending on which HDMI
connector the external equipment is connected.
See, Input Selection section for more information
on changing sources.
NOTE: HDMI cable is not supplied.
SCART Connections
Most devices support SCART connection. You can
connect a; DVD recorder, VCR or decoder to the TV using
the SCART socket (fig.2).
Power off both the TV and the device before making any
connections.
For more information, refer to your device’s own instruction
book.
NOTE:The Scart cable is not supplied.
NOTE:If your external device has a S-Video output,
it is possible to connect your external device with a
SCART-S-video adapter (not included) to the scart
input of the TV. First plug the SCART S-Video adapter
to the SCART connector on your TV set. Then, connect
a S-video cable to the SCART socket (via the Scart
S-Video adapter) to the S-video output of your external
device.
VGA Connections
You can connect a computer (PC) to the TV to
display your computer’s screen image on the TV.
Power up both computer and TV before making
any connections.
Use a 15-pin D-sub display cable to connect a PC
to the TV. Use an audio cable between audio inputs
on the left side of the TV and audio output on your
PC to enable sound connection (fig.3). You will
need to use the supplied SIDE AV CONNECTION
cable for connecting audio signals.
When the connection is made, switch “Source” to
“PC-VGA”. See “Input selection” section.
Set the resolution that suits your viewing
requirements. Resolution information can be found
in the “Appendix parts” .
NOTE: The cable is not supplied.
HDMI 1
DMHI 2
SPDIF
Coax.OUT
External device
(not supplied)
HDMI Cable
fig.1
Scart Cable
(not supplied)
External device
fig. 2
fig. 3
PC Input
(back)
Side AV Input
PC VGA Cable
(Not supplied)
PC Audio Cable
(Not supplied)
Or
MB60_[GB]_(TV-DVD)_[ARGOS]_woypbpr_1900UK_IDTV_BRONZE17_32947W_10076506_50206719.indd 20 01.12.2011 17:35:55