Albatron EXTERNAL MULTI TOUCH MODULE EM215 User manual

External Multi-Touch Module
EM215

2
Contents
Hardware Installation……..…………………………………………………………3
Driver Installation - Windows 7….………………………………………….………5
Driver Installation – Windows XP/ Vista……………………………………………6
Accessories…..………………………………………………………………………9

3
Hardware Installation：
：：
：
（a）To install the clips stably, please screw up the clips by the bundled screws.
（b）To loosen the clip by adjusting the screw, then put EM215 on monitor. Your
monitor will look like the picture below.

4
（c）Connect EM215 and PC by bundled USB cable (type Aconnector to PC, type B
connector to EM215).

5
Driver Installation - Windows 7：
：：
：
EM215 will be recognized automatically under Windows 7, there is no need to install
drvier.

6
Driver Installation – Windows XP/ Vista:
You should install drvier for enabling single touch under Windows XP / VISTA.
Step 1:After double clicking the driver pack, you’ll see the window as below. To click
“Next” to continue.
Step 2:Select components to install

7
Step 3:Choose the folder to install drvier
Step 4:Installing

8
Step 5:Finish installation
Download Windows XP/ Vista driver via the link below:
http://www.albatron.com.tw/taiwan/service/download/download_index.asp

9
Accessories：
：：
：
（a）EM215 External Multi-Touch Module：
（b）USB Cable (Type A to Type B)：
（c）Clips x 2：
（d）Screws x 4