Albatron PX865PE PRO II User manual

PX865PE PRO II
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of the company. Brands and product names are trademarks or registered
trademarks of their respective companies.
The vendor makes no representations or warranties with respect to the contents herein and especially
disclaim any implied warranties of merchantability or fitness for any purpose. Further the vendor
reserves the right to revise this publication and to make changes to the contents herein without
obligation to notify any party beforehand. Duplication of this publication, in part or in whole, is not
allowed without first obtaining the vendor’s approval in writing.
Disclaimer
We make no warranty of any kind with regard to the content of this user’s manual. The content is
subject to change without notice and we will not be responsible for any mistakes found in this user’s
manual. All the brand and product names are trademarks of their respective companies.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. However, there is no guarantee that interference will not occur in a
particular installation.
120410027M1N

PX865PE PRO II
Intel® 82865PE & ICH5R
Supports Socket 478 Intel®Pentium®4 Processor
Enabling Hyper-Threading for your computer system requires ALL of
the following components
zCPU: An Intel®Pentium® 4 Processor with HT Technology
zChipset: An Intel® Chipset that supports HT Technology
zBIOS: A BIOS that supports HT Technology must be enabled
zOS: An operating system that supports HT Technology
For more information on Hyper-Threading Technology, go to:
http://www.intel.com/info/hyperthreading
Package Contents:
zPX865PE PRO II mainboard
zIDE ATA100 Cable
zIDE ATA133 Cable
zFDC Cable
zUSB 4-Port Bracket (optional)
z1394 2-Port Bracket (optional)
zCOM port+ Game port Bracket (optional)
zSATA Power cord (optional)
zSATA Cable (optional)
zSPDIF & FRONT AUDIO port Bracket (optional)
zI/O Shield
zInstallation and Setup Driver CD
zPX865PE PRO II User Manual
zPromise RAID MBFastTrak 133 Lite User Manual

Contents
CHAPTER 1. GETTING STARTED ............................................................1
INTRODUCTION..........................................................................................................1
SPECIFICATION..........................................................................................................2
QUICK CONTENT TABLE ...........................................................................................6
CONFIGURATION .......................................................................................................7
Layout of PX865PE PRO II .................................................................................7
HARDWARE INSTALLATION ......................................................................................8
CPU Processor Installation...................................................................................8
Memory Installation .............................................................................................9
Back Panel Configuration...................................................................................11
Front Panel Indicator: SW/LED、JP2................................................................13
Connectors..........................................................................................................14
Headers & Jumpers.............................................................................................15
Audio Connectors...............................................................................................20
Slots....................................................................................................................22
Power Supply Attachments.................................................................................23
CHAPTER 2. BIOS SETUP..........................................................................24
INTRODUCTION........................................................................................................24
MAIN MENU............................................................................................................26
ADVANCED BIOS FEATURES..................................................................................28
INTEGRATED PERIPHERALS.....................................................................................35
POWER MANAGEMENT............................................................................................40
HARDWARE MONITOR ............................................................................................43
LOAD DEFAULTS.....................................................................................................44
EXIT MENU..............................................................................................................45
CHAPTER 3: SOFTWARE SETUP............................................................46
SOFTWARE INSTALLATION......................................................................................46
CHAPTER 4: TROUBLESHOOTING .......................................................48
APPENDIX I: OVER CLOCKING ................................................................................51
APPENDIX II: 7.1 CHANNEL SETUP .........................................................................56
APPENDIX III: INSTALLING SATA RAID0..............................................................57

PX865PE PRO II
Chapter 1. Getting Started
Introduction
Congratulations on choosing the PX865PE PRO II mainboard! It is based on the 82865PE
Northbridge chipset and the ICH5R Southbridge chipset. It supports Intel®Pentium®4 Processors
with a FSB (Front Side Bus) frequency of 400/ 533/ 800 MHz.
The PX865PE PRO II provides 4 DIMM sockets using 184 pin DDR SDRAM with a total capacity
of up to 4GB. You can install unbuffered & non-ECC DDR400/ 333/ 266 (PC3200/ 2700/ 2100)
SDRAM. It also supports dual channels for the DIMM sockets.
The PX865PE PRO II provides one 8X/ 4X (AGP 3.0) AGP slot for use with 0.8V or 1.5V AGP
cards.
The PX865PE PRO II includes built in IDE facilities that support Ultra DMA 66/100 BMIDE and
PIO Modes. It also includes built in Serial ATA facilities that support SATA RAID 0 and SATA 150.
The PX865PE PRO II also includes a Promise 20276 chip that supports two RAID IDE connectors. It
supports Ultra 133 and RAID 0/ 1 functionality.
The PX865PE PRO II also comes with a PCI multi channel audio controller (VT1720) which
supports high quality 8 channel audio (7.1 channel audio effect) audio. It also supports Sony/ Philips
Digital Interface.
The PX865PE PRO II also comes with eight USB 2.0 ports. It also includes a IEEE 1394 controller
(VT 6307) that supports two IEEE 1394 ports. The PX865PE PRO II also includes an infrared
header.
The PX865PE PRO II comes preinstalled with Voice Genie, BIOS Mirror and AGP Protection.
Voice Genie allows you to select between four languages for audio diagnostics. BIOS Mirror allows
you to have a backup (mirror) BIOS when the primary BIOS is damaged by virus or flash update.
The AGP protection ensures that you only install 8X/4X AGP cards.
PX865PE PRO II also comes with a LAN Chip (Intel 574EI) and provides a back panel LAN port
capable of 1 Gbit/s transmission speeds.
1

PX865PE PRO II
Specification
CPU:
zSupports Socket 478 Pentium®4 processor (Northwood/ Prescott)
zSupports Hyper Threading Technology
Speed:
z400/ 533/ 800 MHz Front Side Bus frequencies
z33 MHz, 32 bit PCI interface (PCI 2.3 compliant)
z66 MHz AGP 3.0 compliant interface that supports 8X/4X data transfer modes
Chipset:
zNorthbridge Chip (MCH) – Intel 82865PE
zSouthbridge Chip (ICH) – Intel ICH5R
zI/O Controller – Winbond W83627HF
zPCI Audio Controller – VIA VT1720
zRAID Controller – Promise PDC20276
zLAN Controller – Intel 547EI
zIEEE 1394 Controller – VIA VT6307
DRAM Memory:
zSupports DDR400 (PC3200)/ DDR333 (PC2700)/ DDR266 (PC2100) SDRAM
zSupports 64 MB/ 128 MB/ 256 MB/ 512 MB/ 1 GB unbuffered & non-ECC DIMM
modules
zSupports memory modules with a total capacity of 4 GB (see memory installation section
for more details)
zSupports dual-channel data bus
zSupports only x8, x16, DDR devices with four banks
Green Functionality:
zSupports Phoenix-Award BIOS ™ power management functionality
zWakes from power saving sleep mode with any keyboard or mouse activity
2

PX865PE PRO II
Shadow RAM:
zThis mainboard is equipped with a memory controller providing shadow RAM and
support for ROM BIOS
BUS Slots:
zAGP slot (AGP 3.0, 4X/8X) x 1
zPCI bus slot x 5
Flash Memory:
zSupports flash memory functionality
zSupports ESCD functionality
Hardware Monitor Function:
zMonitors all fan Speeds
zMonitors System Voltage
Infrared:
zSupports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2 Kbps
zSupports SHARP ASK-IR Protocol with maximum baud rate of up to 57600 bps
PCI Multi Channels Audio Controller Onboard:
zSupports sample rates up to 96 KHz
zMulti-channel AC-link supported alternatively
zIntegrated S/ PDIF transmitter
z8-channel playback capability (7.1 Channel Audio Effect)
Universal Serial Bus:
zSupports up to eight USB ports for USB interface devices
zSupports USB 2.0 Enhanced Host Controller Interface (EHCI) and dual USB 1.1 Open
Host Controller Interface (OHC1)
IEEE 1394 Serial Bus
zSupports two IEEE 1394 ports for 1394 interface devices
3

PX865PE PRO II
BIOS:
zPhoenix-Award™ BIOS
zSupports APM1.2
zSupports ACPI power management
zSupports “BIOS Mirror” technology
I/O facilities:
zOne multi-mode Parallel Port capable of supporting the following specifications:
1. Standard & Bi-direction Parallel Port
2. Enhanced Parallel Port (EPP)
3. Extended Capabilities Port (ECP)
zSupports two serial ports, 16550 UART (one on back panel and one on front panel)
zSupports Infrared Data Transmission using IrDA
zSupports PS/2 mouse and PS/2 keyboard
zSupports 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB floppy disk drives
zSupports one Game port header
IDE Facilities:
zSupports Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes
zSupports IDE interface with CD-ROM
zSupports high capacity hard disk drives
zSupports installation of up to 4 drives, with separate IDE connections for Primary and
Secondary connectors
Serial ATA facilities:
zCompatible with SATA Spec 1.0
zSupports Serial ATA specification of 150 MB/sec transfers
zSupports SATA RAID 0 mode
Promise 20276 Controller onboard:
zSupports two RAID IDE slots
zSupports RAID 0 or RAID 1
zSupports Ultra ATA 133 specifications
zDoes not support ATAPI Devices
For more details please refer to Promise RAID MBFastTrak 133 Lite USER’s Manual.
4

PX865PE PRO II
Voice Genie:
zVoice Genie can generate audio diagnostics in 4 different languages (English、Chinese、
Japanese、German)
AGP protection:
zThis mainboard provides an AGP slot for 0.8V/ 1.5V AGP cards. The AGP protection
function is to protect the mainboard and AGP cards if a 3.3V card is installed.
Inter 570EI LAN Controller on board:
zSupports 10/ 100/ 1000 Mbit/ s Ethernet
zSupports Wake On LAN
zDoes not support ASF
Watch Dog Timer:
zThis mainboard contains a special feature called the “Watch Dog Timer” which is used to
detect when the system is unable to handle over-clocking configurations during the POST
stage. Once a problem is detected the system will reset the configurations and reboot the
system after five seconds.
Dimensions (ATX form-factor):
z244mm x 305mm (WxL)
5

PX865PE PRO II
Quick Content Table
Function Content Location Page
CPU Socket 478 U8 8
DDR DIMM Slots DDR DIMM 1、2、3、4 9
ATX Power Connector ATX_ PWR、ATX_12V 23
IDE Connectors IDE1/2、RAIDIDE1/2、SATA1/2 14
FDC Connector FDC 14
AGP Slot AGP 22
PCI Slots PCI 1、2、3、4、5 22
CPU FAN、Chassis FAN、
Auxiliary FAN CPUFAN、CHASFAN、AUXFAN 9
Front Panel Indicator SW/LED、JP2 13
Speaker Connector SPEAKER 16
Infrared Connector IrDA 16
Front Serial interface Header COM2 17
Front Game Port Header J1 18
Front USB Headers USB2、USB3、USB4 15
IEEE 1394a Headers 1394 CN1/ 1394 CN2 15
Voice Genie / BIOS Mirror &
AGP Protection Function Switch SW1 19
Clear CMOS Jumper JP1 18
Case Open Warning Function CASE OPEN 17
Sony/Philips Digital Interface Conn. S/PDIF 21
CD-ROM Audio IN Header CD-IN 20
Front Panel Audio Header FRONTAUDIO 20
PC99 Color Codec Back Panel Back Panel Connector 11
6

PX865PE PRO II
Configuration
Layout of PX865PE PRO II
Intel
82865PE
VIA
VT6307L PROMISE
PDC20276
PRT/COM
KB/MS
U8
Socket 478
U12
U16
CPUFAN
FDC
ATX_PWR
AGP
PCI1
PCI2
PCI3
PCI4
PCI5
J1
VIA
VT1720
Winbond
W83627HF
USB2
1
2
1
BIOSBIOS
U30 U31
1394 CN1 1394 CN2
11
22
FRONT AUDIO
9
10
USB/LAN
ATX_12V
SOUND2
SOUND1
AUXFAN
IrDA
USB3 USB4
SPDIF
CD-IN
22
11
12
COM2
1
1
2
2
1
1
9
2
10
VIA
VT1616
DIMM2 DIMM4
IDE2IDE1
DIMM1 DIMM3
Intel
ICH5R
CASE OPEN
1
RAID IDE1
JP2
BAT1
Voice Genie
CHIP
JP1
1
1
RAID IDE2
SATA2
SATA1
CHASFAN SW/LED
SPEAKER
1
1
12
9
10
SW1
Intel
547EI
7