alberta RISCO RWT62W Use and care manual

1
CHANGING OF BATTERIES
INSTRUCTIONS
MANUAL
How many batteries do I need?
The number of batteries required will depend on the PIR Model installed. Please make reference to
the below examples.
WIRELESS
DOOR/WINDOW CONTACT
V. 2020.001
RWT62W
Qty x 1 CR123a
RWT72I
Qty x 1 cr123a
To learn how to change your PIR’s battrey your can simply watch the video in the link or follow the steps below.
https://www.alberta.com.mt/product-category/user-manuals-manwali-tas-sistemi/

1
Keep in Mind! Service your alarm every year to make sure that the
system is functioning properly.
(Keypad / panel might differ)
( Keypad / panel might differ)
Kif ser inbiddel il- batteriji mil-contact?
Step 1
Buy batteries CR123A.
Step 2
Make sure the alarm is not active.
Step 3
You will need a ladder or a step stool.
Step 4
Approach Contact whilst taking
the necessary safety precautions.
(contact model might differ)
Step 6
Remove old batteries and
observe battery polarity ( +/-).
Step 5
Gently open contact
bottom upwards.
Step 7
Install new battery
with the right polarity.
Step 8
Gently close PIR cover.
Step 9
Switch on system to test.
Enquiries: +(356) 21443538 e:customer[email protected]
24 x 7 emergencies: +(356) 21444411