1
34
2
3 4
5
2
1
User instructions
1. Unscrew end cap.
2. Place provided Li-ion battery into chamber.
a. Positive pole towards the head.
3. Screw end cap back on the unit.
4. Press button to operate.
Power on: When o, press the button rmly to turn on the ashlight.
3 dierent light modes:
1. Press button rmly, so you hear a click to power on in White Light Mode (50 %).
2. Press button softly to get the 2nd White Light Mode (100 %).
3. To activate UV-A Light press button softly again to the UV-A 365 nm Mode.
Power o: Press button rmly, so you hear a click, to turn power o.
Content of the box
1. PDL-II POWERLIGHT
2. Battery 3400 mAh 7.4V
3. Table holder
4. Adapter with xed
charging cable
5. Lens cap
Check content: While unpacking, check for any signs of shipment damage and, if found, notify both transporter
and supplier in writing within 8 days after receipt with full details of the damage that has occurred and retain the
equipment and packing materials for inspection. Check that all parts have been received as ordered. Make sure
that all packaging is removed from the machine before use.
Maintenance and attention points:
1. Only the supplied high performance rechargeable 7.4 V Li-ion battery MUST be used.
2. Avoid contact between chemicals and corrosive gasses.
The PDL-II POWERLIGHT is waterproof executed.
3. Users can lubricate the end cap screw thread one time per year to ensure smooth operation.
4. Use a soft brush and alcohol to clean, when required.
5. If the PDL-II POWERLIGHT is opened for repair, the warranty is void.
In case of a technical problem, please contact your distributor.
6. If the batteries needs to be recharged, use only the supplied
inductive charger
or
an approved battery charger
Make sure that the polarity of the battery is not reversed, when placed in the charger.
Battery charging time takes from 4 to 5 hours. (empty to full)
7. The PDL-II POWERLIGHT is executed with an automatic temperature switch o, activated
when the temperature of the Aluminium housing reached 50 °C. However it’s recommended
not to place the PDL-II, when switched on, with it’s head on the surface, as the temperature
can go up to around 100 °C.
Specications
Power LED’s : 5x 5 W UV-A 365 nm i.c.w. 1x 5 W
white Cree LED XPG2 S3
Lifetime LED’s : 20.000 hours
Drop proof : Up to a drop height 1,2 m drop proof
Material : Aluminum T6061, PremiumType III hard anodized abrasive nish
Color : Black
Weight : 336 Gram (incl battery)
Handling : Full grip, anti drop design
Battery type : 1x 18650 Li-ion rechargeable battery - Panasonic 7.4 V - 3400 mAh
with overcharge protection
Battery life : 3 operational hours
(based on a switching of 1 hour UV-A and 2 hrs. of white light)
Electrical supply : 100-240 V ˜50-60 Hz
IP rating : IP67
Switch : Metal executed
Quality procedure : ISO 9001
Life span : Min. 5 years
Certicate : Complies to IEC report (IEC 60598-2-8)
Manual : Included in English language
Guarantee : 2 years on electrical performance
