User instructions
1. Unscrew end cap.
2. Place provided Li-ion battery into chamber.
a. Remove the transparent protective foil
b. Positive pole towards the head.
3. Screw end cap back on the unit.
4. Press button to operate.
Power on: When o, press the button rmly to turn on the ashlight.
4 dierent light modes:
Press button rmly, so you hear a click, to power on in 100% white light mode.
Press button 1x gently to activate 50% white light mode
Press button 1x gently to activate 100% UV-A mode
Press button 1x gently to activate 50% UV-A mode
Power o: Press button rmly, so you hear a click, to turn power o.
Warranty
24 months warranty on mechanical and electrical failures. Damage
due to misuse and negligence falls outside the scope of the warranty.
12
34
2a 2b
Maintenance and attention points:
1. Only the supplied high performance rechargeable Li-ion battery MUST be used.
2. Avoid contact between chemicals and corrosive gasses.
The DUAL-II POWERLIGHT is water resistant.
3. Users should lubricate the end cap screw thread once per year
to ensure smooth operation and a water tight sealing.
4. Use a soft brush and alcohol to clean, when required.
5. If the DUAL-II POWERLIGHT is opened for repair, the warranty is void.
In case of a technical problem, please contact Alcochem.
6. If the battery needs to be recharged, use only an approved USB charger..
Battery charging time takes from 4 to 8 hours.
Safety Precautions
1. Avoid direct exposure to eyes, as the high intensity UV-A and White
light beams, may harm your eyes.
2. This DUAL-II POWERLIGHT is not a toy, please keep children away from it.
3. Only use Li-ion batteries sourced from Alcochem and designed for this
DUAL-II POWERLIGHT. Use of other batteries may cause permanent damage to
the DUAL-II POWERLIGHT.
4. Remove the battery if unused for a long time, to avoid battery leakage which
may damage other components.
Specications
Light source : 5 Watt
white Cree LED XPG2 S3 +
5 Watt UV-A LED
Power Supply : Rechargeable Li-ion battery, type 18650
Size : 150 mm x 27-35 mm / 5.9 x 1-1.4 inch
Weight : 134 g. (excluding battery)
Switch :
Base switch (sealed silicon) in black color
Colour/Material : Black / Aluminium T6061
TIII hard-anodized nish
Treatment : Anti-abrasive nish
Protection level : IP67 (Protected against water submersion)
Certicate : Complies to IEC report (IEC 60598-2-8)
Drop test : 1.5 m / 5 ft
Included : Flashlight, Battery, Carrying strap, Belt holster,
USB-C cable, Power adapter
