alerta alerta chime User manual

Alerta Chime Description
Alerta Chime is a device that plays
an MP3 audio file when a door is
opened (when the large device
sensor moves more than three-
quarters of an inch away from the
device magnet). Alerta Chime can
be used to playback recorded
alarm sounds or voice messages.
The audio file(s) is/are copied to
the device via computer and
saved on the device memory.
There are seven adjustable volume
levels.
What’s in the Box
•Alerta Chime device (two
pieces)
•Wall mount hardware
•AAA batteries
Product Information
•Brand Name: Alerta Chime
•Model: Microsound V15
•Type: Speaker
•Country of Origin: manufactured
by Shenzehn Waytronic
Electronics Co Ltd, China
•Audio Format: MP3, 8~224Kbps
•Power Supply: three AAA
batteries or micro-USB (DC 3V-
5V)
•Current: standby door closed <1
uA; standby door open <23 mA;
playing <120 mA (VDC 4.5)
•Magnetic sensitivity distance: <1
inch
•Volume: up to 100 decibels
•Audio Output: 8ohm/1Watt
•Certification: CE.ROH
•Single unit size: 6x9x2.7 cm3
•Single gross weight: 0.20 kg
Disclaimer
Alerta Chime is not aprecise
instrument and should in no
way be relied on for any
purpose or application,
including but not limited to
those related to medical, life
support, automotive, aviation,
personal safety, or anti-theft, or
any purpose where failure or
malfunction could result in the
injury or death of a person, in
the loss or damage to property,
or in harm to the environment.
Track Patch 1 Corporation does
not warrant the performance of
this device.
User Guide
English
Contact Information
We would love to hear from you.
Track Patch 1 Corporation
134 N Battlefield Blvd
Chesapeake VA 23320
www.alertafamily.com
Phone: (833) - 3ALERTA
Email: [email protected]
Door-Open Sensor

Adjust Volume & Power Off
•Press and release button “B”
to select one of seven volume
levels.
•Switch “V” to bottom position
to turn off power.
Select Audio File
•Push and release button “A”
to advance through audio
files.
•Press and release button “A”
and see red light flash one
time to select file for
playback.
Update or Change Audio Files
1. Connect device to computer
with a micro-USB data cable.
Computer will recognize the
device as a removable disk.
2. Format this removable disk, if
necessary. Create two new
folders named “warning” and
“welcome” on disk, if they do
not exist.
3. Copy audio file to “warning”
and to “welcome” folders.
Notes
•Move switch “V” when device
is not near magnet “M.”
•Pressing buttons “A” and “B”
too fast may result in
unexpected performance.
W
C
B
L
A
SM
U
V
R
Select Playback Mode: “Alarm” or
“Message”
“Alarm” audio file playback.
•Move slide switch “V” to middle
position.
•When door is open, the
selected audio file from
“warning” folder plays once
(default “Door Open” mode:
“single” playback).
•When door is closed, playback
stops (default “Door Closed”
mode: “interrupt” playback).
“Message” audio file playback.
•Move slide switch “V” to top
position.
•When door is open, the
selected audio file from
“welcome” folder plays once
(default “Door Open” mode:
“single” playback).
•When door is closed, playback
stops (default “Door Closed”
mode: “interrupt” playback).
Change “Door Open” Mode
There are two “Door Open” modes:
“single” audio file playback (default)
and “series” playback.
•To change “Door Open” mode
to “series” playback (where a
different file from the folder
plays each time the door is
opened), press-hold-release
button “A” and see red light
flash three times. Each time the
door is opened, the next audio
file in the folder will play. While
door is open, audio file will play
in its entirety.
•To change “Door Open” mode
to “single” playback (where the
selected audio file plays one
time), press-hold-release button
“A” and see red light flash one
time.
Change “Door Closed” Mode
There are two “Door Closed”
modes: “interrupt” playback and
“continue” playback.
•To change “Door Closed”
mode to “continue” audio file
playback, press-hold-release
button “B” and see red light
flash three times.
In “Alarm Playback” mode,
“Door Closed Continue” mode
means that the audio file will
continuously play and will
stop only by pressing button
“B” or cycling power switch
“V.”
In “Message Playback” mode,
“Door Closed Continue” mode
means that the audio file is
played back in its entirety
when door is closed and then
stops.
•To change “Door Closed”
mode to “interrupt” audio file
playback (where the audio file
play back immediately stops
when door is closed; default
mode), press-hold-release
button “B” and see red light
flash one time.
Device Features
A. Set Door Open mode
B. Set Door Close mode
C. Battery compartment
L. Light
M. Magnet
R. Magnetic Reader area
S. Speaker
U. Micro USB port
V. Power & Volume switch
W. Wall mount receptacles