28882 Crusinallo (VB) Italia
tel. 0323 868611 fax 0323 641605
www.alessi.com
KK19
design King-Kong, 1994
MGPF
design Michael Graves, 1989
9094
design Aldo Rossi, 1985
Figura 1
The Alessi press filter coffee makers have
been designed for those people who like
to prepare their coffee using the method
that is now particularly common in
Northern Europe and America. The press
filter coffee maker, or hand-pressed filter
coffee maker, was first conceived in Italy
in 1920's. It makes coffee that has a very
particular flavour and smoothness,
different not only from the espresso
machine and the percolator, but also from
the Melitta system with paper filters, or
even the Neapolitan coffee pot. The main
advantage of the press filter coffee maker
is the fact that any amount of ground
coffee and water can be used, giving as
weak or as strong a coffee as desired.
The Alessi press filter coffee maker are
ideal for making coffee, but also for making
tea or herbal infusions. For best results,
we recommend using your press filter
coffee maker for one kind of beverage
only, so that any residual flavour of coffee
or herbal teas do not spoil the taste of
another beverage.
PLEASE NOTE
When referring to a cup of coffee made
by the press filter coffee maker method,
the intended cup is a large cup or mug
(around 10 cl), not the small demitasse
cup (around 5 cl).
Pressfilter coffee makers
BEFORE USE
Before using your press filter coffee maker
for the first time, we recommend washing
it carefully using a non-abrasive washing-
up liquid.
DURING USE
Remove the lid and the filter. Warm the
glass jug by rinsing with very warm water.
Add the coffee to the jug - best results are
obtained with coffee that is not ground too
finely. The normal amount of coffee used
is one heaped tablespoon per cup of coffee,
but of course your own taste and judgement
will be the best guide to the precise quantity.
Onto the ground coffee, pour as much water
as required for the desired number of cups.
The maximum amount of water is indicated
on the glass jug. Stir well with a spoon.
Instructions for use
Put the lid on the press filter coffee maker
and leave the coffee to stand for 3-5
minutes.
Make sure that the filter remains in the
"up" position and that it does not touch the
froth that forms on the surface.
The longer the coffee stands, the stronger
it will become.
Press the filter down slowly but firmly. The
coffee is filtered immediately and is ready
to drink.
CLEANING
Rinse the various parts of the press filter
coffee maker under running water and dry
thoroughly. So as not to spoil the taste of
your coffee, detergents are best avoided.
The heat-resistant glass jug is dishwasher-
safe.
We recommend taking the filter section
apart every so often for thorough cleaning,
particularly if the press filter coffee maker
has not been used for some time. Unscrew
the filter section by turning it clockwise on
the rod. Separate the three parts that make
up the filter section, and rinse them under
running water. Dry thoroughly and be sure
to re-assemble the filter correctly. (Fig. 1)
SPARE PARTS
In case of loss, wear or breakage, the
following spare parts can be ordered from
your usual Alessi supplier quoting the code
number.
Heat-resistant glass jug for 3 cup press filter
coffee maker: code 35740
Heat-resistant glass jug for 8 cup press filter
coffee maker: code 35741
Upper filter holder with spring for 3 cup
press filter coffee maker: code 9094/3 FI/S
Upper filter holder with spring for 8 cup
press filter coffee maker: code 9094/8 FI/S
Mesh filter for 3 cup press filter coffee
maker: code 9094/3 RETE
Mesh filter for 8 cup press filter coffee
maker: code 9094/8 RETE
Lower filter holder for 3 cup press filter
coffee maker: code 9094/3 FI/I
Lower filter holder for 8 cup press filter
coffee maker: code 9094/8 FI/I
