ALFAtron ALF-CAM100 User manual

www.alfatronelectronics.com
ALFATRON ELECTRONICS GmbH GERMANY
ALF-CAM100 Full HD Camera
User Manual

ALFATRON ALF-CAM100
Content
Legal Statement 01
Preface 02
Safety Precautions 03
1 Product Overview 04
1.1 Production Introduction 04
1.2 Features 04
1.3 Package list 04
1.4 Component description 05
2 Connection 05
3Operating Description 06
4Specification 08
5 Warranty…………………………………………………………………………….09

-1-
ALFATRON ALF-CAM100
Legal Statement
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions (1)this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation and after change.

-2-
ALFATRON ALF-CAM100
Preface
Overview
This document describes in detail the quick configuration of the
Alfatron ALF-CAM100 series.
Symbol Conventions
For the purpose of this document, the following signs that may exist herein mean
as below:
Symbol Description
Danger
Danger indicates an imminently hazardous situation
which,
if not avoided, will result in death or serious injury.
Warning
Warning indicates moderately or lowly hazardous
situation which, if not avoided, will result in minor or
moderate injury.
Caution
Caution alerts you to possible equipment damage, data
loss, performance degradation or unpredictable results if
you do not follow instructions.
Anti -static
Alert you to static-sensitive equipment.
Protection
Against Electric Shock
Alert you to high voltage.
Laser
Radiation
Alert you to intense laser radiation.
Tip
Help you with solving a problem or saving your time.
Note
Additional information for the main body, which can be
known as an emphasis and supplement to the main body.

-3-
ALFATRON ALF-CAM100
Safety Precautions
Before using the product, read and abide by the following requirements to
prevent damage to the product or your belongings.
Caution
· Transport, use, and store the product only under the appropriate temperatures
and humidity.
· Installtheproduct in awell-ventilatedplaceanddonotblockthe device'sair
vents.
· Install the product in a steady place.
· Do not place the product in damp, dusty, or smoky areas.
· Do not place the product in direct sun light or near a heat source.
· Do not let the product come in contact with liquids.
· Do not disassemble the product at will.
Important Statements
· The physical product shall prevail while this User Manual is for reference only.
· The product will automatically update itself. If there is an upgrade, no
notifications will be given.
· For the latest procedure and supplementary documentation, please contact
the service center.
· Should there be any doubts or any disputes over the product instructions, the
company reserves the rights of final interpretation.

-4-
ALFATRON ALF-CAM100
Produc t Overview
1.1 Product Introduction
Alfatron ALF-CAM100 is a video conference camera, configured with 120 ° field of
view,1080P HD webcam, suitable for small and medium-sized conference scenes,
personal business, home or leisure place.
1.2 Features
· 1080P HD camera
120°Field of view, clear and fluid picture
· Mechanical adjustable lens
The lens can be adjusted vertical -30 to 30 degree and horizontally -150 to 150
degree, enabling flexible shooting angle
· Video integration
Supporting Skype, WeChat, MSN and other online communication software.
1.3 Package list
Please check whether the materials are complete according to the following table
when opening the box.
No Name
Picture
Pcs
Function Description
1
Camera
1
Conference shooting
Pickup and display conference
audio
2 User
manual
1 Help users to install, connect,
and use video terminal devices

-5-
ALFATRON ALF-CAM100
Component description
HD network camera
Connection
Connect HD camera to a PC with the USB Cable.

-6-
ALFATRON ALF-CAM100
Operating Description
·Connecting USB cable to a computer, the following prompt will appear in
the lower right corner of the computer when first time using.
.
·When the device driver is installed successfully, the following prompt will
appear on the computer side
If you need to confirm whether the equipment has installed successfully, in "computer
properties" - click on the "device manager" - click on the "image equipment"
ALF-CAM100 will appear in the device list.

-7-
ALFATRON ALF-CAM100
·If the color and resolution of video are found to be abnormal, you can use the
camera adjustment software called “Amcap” to make adjustments. Check the
output size, white balance and video for the corresponding values.
Check the white balance option with a default value of 4600
Video output size, select 1920*1080
Or change the camera to "restore the default effect" in instant messaging
software.

-8-
ALFATRON ALF-CAM100
Specification
Specification Description
Dimension Camera:104* 139* 124mm
Net weight Camera:500g
Color Black
Interface USB 2.0
Lens 1/2.8, fixed focus, 120° Angle
Sensor Full HD CMOS sensor
Video 1920*1080
Image transmission speed Up to 30FPS
Aperture coefficient F2.0
Focus distance 30～300CM (Better distance）
Computer system Windows ® 7, 10 / Mac OS X 8.1 or 10.7
or higher operating system, etc.
Recommended conditions Humidity：20~85% condensation free
Noise level：<48dB
Storage temperature：-10°~55°
Reverberation time:<0.5 seconds
Certification CE/FCC

ALFATRON ALF-CAM100
Warranty
1. Limited warranty in respect of Alfatron Products
1.1 This limited warranty covers defects in materials and workmanship in this product.
1.2 Should warranty service be required, proof of purchase must be presented to the Company.
The serial number on the product must be clearly visible and not have been tampered with in any
way whatsoever.
1.3 This limited warranty does not cover any damage, deterioration or malfunction resulting from
any alteration, modification, improper or un reasonable use or maintenance, misuse, abuse,
accident, neglect, exposure to excess moisture, fire, improper packing and shipping (such claims
must be presented to the carrier), lightning, power surges, or other acts of nature. This limited
warranty does not cover any damage, deterioration or malfunction resulting from the installation or
removal of this product from any installation, any unauthorized tampering with this product, any
repairs attempted by anyone unauthorized by the Company to make such repairs, or any other
cause which does not relate directly to a defect in materials and/or workmanship of this product.
This limited warranty does not cover equipment enclosures, cables or accessories used in
conjunction with this product.
This limited warranty does not cover the cost of normal maintenance. Failure of the product due to
insufficient or improper maintenance is not covered.
1.4 The Company does not warrant that the product covered hereby, including, without limitation,
the technology and/or integrated circuit(s) included in the product, will not become obsolete or that
such items are or will remain compatible with any other product or technology with which the
product may be used.
1.5 Only the original purchaser of this product is covered under this limited warranty. This limited
warranty is not transferable to subsequent purchasers or owners of this product.
1.6 Unless otherwise specified, the goods are warranted in accordance with the manufacturer’s
product specific warranties against any defect attributable to faulty workmanship or materials, fair
wear and tear being excluded.
1.7 This limited warranty only covers the cost of faulty goods and does not include the cost of
labour and travel to return the goods to the Company’s premises.
1.8 In the event of any improper maintenance, repair or service being carried out by any third
persons during the warranty period without the Company’s written authorization, the limited
warranty shall be void.
1.9 A 7 (seven) year limited warranty is given on the aforesaid product where used correctly
according to the Company’s instructions, and only with the use of the Company’s components.
1.10 The Company will, at its sole option, provide one of the following three remedies to whatever
extent it shall deem necessary to satisfy a proper claim under this limited warranty:
1.10.1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of
time, free of any charge for the necessary parts and labour to complete the repair and restore this
product to its proper operating condition.; or
1.10.2 Replace this product with a direct replacement or with a similar product deemed by the
Company to perform substantially the same function as the original product; or
1.10.3 Issue a refund of the original purchase price less depreciation to be determined based on
the age of the product at the time remedy is sought under this limited warranty.
1.11 The Company is not obligated to provide the Customer with a substitute unit during the
limited warranty period or at any time thereafter.

ALFATRON ALF-CAM100
1.12 If this product is returned to the Company this product must be insured during shipment, with
the insurance and shipping charges prepaid by the Customer. If this product is returned
uninsured, the Customer assumes all risks of loss or damage during shipment. The Company will
not be responsible for any costs related to the removal or re-installation of this product from or into
any installation. The Company will not be responsible for any costs related to any setting up this
product, any adjustment of user controls or any programming required for a specific installation of
this product.
1.13 Please be aware that the Company’s products and components have not been tested with
competitor’s products and therefore the Company cannot warrant products and/or components
used in conjunction with competitor’s products.
1.14 The appropriateness of the goods for the purpose intended is only warranted to the extent
that the goods are used in accordance with the Company’s installation, classification and usage
instructions.
1.15 Any claim by the Customer which is based on any defect in the quality or condition of the
goods or their failure to correspond with specification shall be notified in writing to the Company
within 7 days of deliver or (where the defect or failure was not apparent on reasonable inspection
by the Customer) within a reasonable time after discovery of the defect or failure, but, in any
event, within 6 months of delivery.
1.16 If delivery is not refused, and the Customer does not notify the Company accordingly, the
Customer may not reject the goods and the Company shall have no liability and the Customer
shall pay the price as if the goods had been delivered in accordance with the Agreement.
1.17 THE MAXIMUM LIABILITY OF THE COMPANY UNDER THIS LIMITED WARRANTY
SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT.