Alien ALR-H450 User manual

AlienTechnology,LLCALIEN®
ALR-H450Handheld TerminalUser
Manual

AlienTechnology,LLCALIEN®
CATALOGUE
Chapter 1 Getting Started..........................................................................................................3
Chapter 2 About The Device.....................................................................................................5
Chapter 3 Call Function............................................................................................................8
Chapter 4 Barcode Reader.......................................................................................................10
Chapter 5 RFID Reader...........................................................................................................11
Chapter 6 The Other Functions...............................................................................................13

AlienTechnology,LLCALIEN®
Chapter 1 Getting Started
1.1 Brief Instruction
ALR-H450 is a series of Android powered smart terminals, with data capture, data processing,
wireless communication. It is with high-reliability & high-expansibility. Auto & Accurate data
collection is achieved in various business fields via a complete solution of premium options, the
flexible solution among options and operators is suited-up. You will find out with ALR-H450,
much easier deployment, reduced complexity, decreased maintenance, are the benefits for
enterprises.
ALR-H450 meets industrial level IP64 (IEC sealing), is sufficient to routine applications, eg,
railway inspection, road parking toll, vehicle inspection, logistics express, power inspection,
warehousing management, chain retail, etc. Whether the mobile operators are working indoor or
outdoor, withALR-H450, your business is always &highly efficient on-line.
Meeting industrial standards, designed to support a various of mobile solutions. With the build-in
high performance Cortex-A7 1.3GHZ quad core processor technology, the operators need only
one device to enjoy a convenient and easy job, ALR-H450 will be the ideal choice for key-fact
business in mobile solutions, for simplified task flow, enhanced work efficiency, for shortened
time to customer response, more satisfied customer care service.
ALR-H450 comes with world wide band WCDMA technology. Multi channels data and voice
communication guarantees the real-time communication and data efficiency, ALR-H450 brings
you the best ROI.
1.2 Precaution Before Using Battery
Do not leave batteries unused for extended periods of time, either in the product or in storage.
When the battery has been unused for 6 months, check the charge status and charge or
dispose of the battery as appropriate.
The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500
charge cycles, whichever occurs first. One charge cycle is a period of use from fully charged,
to fully discharged, and fully recharged again. Use a two to three year life expectancy for
batteries that do not run through complete charge cycles.
Rechargeable Lithium-Ion batteries have a limited life and will gradually lose their capacity
to hold a charge. This loss of capacity (aging) is irreversible. As the battery loses capacity,
the length of time it will power the product (run time) decreases.
Lithium-Ion batteries continue to slowly discharge (self-discharge) when not in use or while
in storage. Routinely check the battery’s charge status. The user manual typically includes
information on how to check battery status, as well as battery charging instructions.
Observe and note the run time that a new fully-charged battery provides for powering your
product. Use the new battery run time as a basis to compare run times for older batteries. The
run time of your battery will vary depending on the product’s configuration and the
applications that you run.
Routinely check the battery’s charge status.
Carefully monitor batteries that are approaching the end of their estimated life.

AlienTechnology,LLCALIEN®
Consider replacing the battery with a new one if you note either of the following conditions:
The battery run time drops below about 80% of the original run time.
The battery charge time increases significantly.
If a battery is stored or otherwise unused for an extended period, be sure to follow the storage
instructions in this document. If you do not follow the instructions, and the battery has no
charge remaining when you check it, consider it to be damaged. Do not attempt to recharge it
or to use it. Replace it with a new battery.
Always follow the charging instructions provided with your product. Refer to your product’s
user manual and/or online help for detailed information about charging its battery.
Charge or discharge the battery to approximately 50% of capacity before storage.
Charge the battery to approximately 50% of capacity at least once every six months.
Remove the battery and store it separately from the product.
Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).

AlienTechnology,LLCALIEN®
Chapter 2 About The Device
2.1 Structure
<Front>

AlienTechnology,LLCALIEN®
<Back>
Buttons:
Button Function
1. Power Button Press and hold to turn the device on or off
2. App List View Button View a list of apps running
3. Home Button Press to return to the home screen
4. Cancel Button Tap to return to the previous screen
2.2 SD Card Installation
Detailed installation steps are as follows:
1. Open the SIM slot as the direction of ‘Open/Lock’ labeled;
2. Open the SD slot as the direction of ‘Open/Lock’ labeled;
3. Install the SD card properly;
4. Lock the SD slot and SIM slot properly;

AlienTechnology,LLCALIEN®
2.3 SIM Card Installation
1. Open the SIM slot as the direction of ‘Open/Lock’ labeled;
2. Install the SIM card correctly;
3. Lock the SIM slot properly;
2.4 Battery Installation
1. Push the battery down into the bottom of the battery;
2. Push the battery to the direction of the array;
3. Turn the battery lock;
2.5 Battery Charging
2.5.1 Direct Charging
Use the adapter to charge the battery via the USB connector of the snap-on;.
2.5.2 Cradle Charging
Connect the adapter with the power cable to charge the device.
2.6 Device Turning on/off
Press the ‘Power’ button on the side shortly due to turn on/off.
2
3

AlienTechnology,LLCALIEN®
Chapter 3 Call Function
3.1 Phone
1. Click this icon :
2. Click the number button to input the numbers;
3. Click the button to confirm and dial;
4. Click the to end the calling;
3.2 Contacts
1. Click ‘Contacts’ to open the contacts list;
2. Click ‘ ’ to add the new contact;
3. Click ‘ ’ to import/export or delete the contact list;
Contacts
Logs
Voice Calling
Emulated Numeric Keypad

AlienTechnology,LLCALIEN®
3.3 Messaging
1. Click ‘ ’ to open the message list;
2. Click ‘ ’ to input the content;
3. Click ‘ ’ to send the message;
4. Click ‘ ’ to add photos, videos;
Favorites
Contact List
Group

AlienTechnology,LLCALIEN®
Chapter 4 Barcode Reader
4.12D(S) Barcode
1) Open the 2D(S) Barcode Demo inAppcenter;
2) Press the ‘Scan’ button to start scanning, then the auto interval parameters can
also be set;
3) Also, the barcode types enabling/disabling can also be set;
Note: Please scan the barcode correctly, otherwise the scanning might be failed;