AlienPro MINI WASH User manual

MINI WASH
MANUAL DE USUARIO
alienpro.com.mx

1
www.alienpro.com.mx
2
www.alienpro.com.mx
Foreword
Features
Function model setting
DMX-512 Function
Notice about Master-slave synchronization
The connection of Master-slave synchronization as below
The connection of Master-slave synchronization as below
Detailed DMX-512 address code set as following
Thank you for your patronage. We are confident that our excellent products and service can satisfy
you. For your own safety, please read this user manual carefully before installing the device.
In order to install , operate, and maintain the lighting safety and correctly. We suggest that the
installation and operation should be done by the verified technician and follow the instruction
strictly.
Every person involved with the installation, operation and maintenance of this device has to:
- Be qualified
- Follow carefully the instructions of this manual
Voltage/Frequency: 120/230V,50Hz/60Hz
Power Consumption: 50W
LED:86PCS 5mm intensive brightness LED(30pcs RED, 28pcs GREEN,28pcs BLUE)
ControL: Auto, Sound Activate,DMX, Master/Slave
4 DMX channels
Pan 270 degree, Tilt 360 degree
Strobe speed 0-255 ajustable
RGB color mixation
The device adopts international standard DMX-512 signal, with totally 4 channels, details as
below:
DMX-512 address code set:
This unit is equipped with 4 channels, while the address code of the first light is 0, the second is
0+1=1, the third 1+1=2, and so on.
1. When the master machine is running, the light will send DMX-512 signals, however, it can’t be
connected to the controller, otherwise, they will interrupt each other , thus that can not be
synchronized.
2. While many lights are using master-slave synchronization, only one of them can be master, or
they can’t be synchronized.
Safety Notice
Please be sure to turn off the device before installation and maintenance
Please be sure when operating the device you have good ventilation.
This device is design for indoor use.Do not use other voltage that not complied with the instruction
showed.
Do not stare at the lighting source, it may damage you eyes.
Please note: Every information is subject to change without prior notice.
Mode
Binary code
（
ON
）
1
DMX-512signal control mode
1-9 setting address, 10--on
2
Music activation
9--ON
、
1,2,3,4,5,6,7,8,10--OFF
3
Automatic
1—10--OFF
4
Music control for master unit
9 __ON, 10—OFF,1-8 for
adjusting flash frequence
5
Automatic for master unit
9,10 off,the rest for changing
color
6
Slave mode
1-9—NO SETTING
、
10—ON
(Don’t connect to controller)
Channel
DMX-512 Value
Controlled effect
CH1
0-255
Vertical
movement(270degree)
CH2
0-255
Horizontal movement(360
degree)
CH3
0-36
Dark
37-71
blue
72-107
green
108-142
red
143-179
blue and green
180-215
red and blue
216-251
green and red
252-255
blue ,red and green
CH4
0-255
speed of strobe ( quick get
to slow gradually)
DMX-512 Function
Lighting NO.
Original address
（
ID
Value
）
Binary Code Dialing
（
ON
）
1
0
10
2
1
10.5
3
2
10.6
4
3
10.5.6
5
4
10.7
6
5
10.5.7
7
6
10.6.7
8
7
10.5.6.7
9
8
10.8
10
9
10.5.8
···
······
······