Aline AL-3DG User manual

AL-3DG Multi-Line Laser
INSTRUCTION MANUAL

Working range up to 20m visible
30m with receiver
Lens type Single glass lens
Output power <1mW
Wavelength Line beam: 520nm
Accuracy ± 3mm at 10 m
Precision of angle 90° ± 0.02°
Angle of projection 3x360°
Self-levelling range ± 3°
Out of range Flashing
Brake mode Magnet
Function button Horizontal
Vertical
Front vertical side
Power supply Lithium Ion
Duration 20 hours with one beam
running and 8 hours with
all beams running
Laser class 2
Operating temperature 0°C ~ + 45°C
IP rating 54
Weight 4Kg (Kit)
Size 340x410x150 (Kit Case)
SPECIFICATIONS AL-3DG BOX CONTENTS

AL-3DG BOX CONTENTS
1. AL-3DG Laser
2. Green Laser Enhancement Glasses
3. Magnetic Ceiling Target
4. Receiver and Clamp
5. Instruction Manual
6. Carry Case

OPERATING PROCEDURE
1. Charge the unit by attaching the supplied USB cable into a
power source.
2. Push the lock switch to the “ON” position and the
horizontal line is projected.
3. If the unit is not level the beam will flash.
4. Tilt the unit to the le or right, place unit on flat surface to
allow the unit to self level.
5. Push the lock switch to “LOCK” position to lock the
compensator to allow angled lines to be projected.
6. Switch the lock switch to “UNLOCK” and horizontal line is
projected and the pendulum compensator will now level.
7. Press the operating mode button to change the beam.
8. Aer use, push the “LOCK” switch to the “OFF” position
and place it back in the carry case.
9. This product can be used with a tripod or a wall bracket.
• When initially switched on the horizontal line
is projected
• Press once and front vertical line is projected
• Press twice and front and side vertical line is
projected
• Press three times and the front and side
vertical line is projected as well as the
horizontal line

EXTERIOR STRUCTURE
1. Horizontal head
2. Side vertical head
3. Front vertical head
4. Operating mode button
5. LCD Display
6. Receiver Mode
7. Lithium Ion pack
1
3
2
4
5
6
7

EXTERIOR STRUCTURE
Operating Modes
1. When initially switched on the horizontal line is projected
2. Press once for front vertical line
3. Press twice for front and side vertical lines
4. Press three times for all lines
Receiver Mode
1. Press once to allow any laser line to be read by laser receiver
Compensator lock switch Panel
USB out
Charging Ports
USB in (charging port)

WARRANTY
This product is warranted by aLine to the original purchaser
to be free from defects in material and workmanship
under normal use for 2 years of the laser only and 1 year for
the included accessories.
During the warranty period, and upon proof of purchase, the
product can be either repaired or replaced (with the same or
similar model at our option), without charge for either parts
or labour through aLine. Warranty on this replacement unit
will be the remainder of the original 2 year warranty. The
purchaser shall bear all shipping, packing and insurance
costs. Upon completion of the repair or replacement, the
unit will be returned to the customer, freight prepaid. The
warranty will not apply to this product if it has been misued,
abused or altered. Without limiting the foregoing; battery
leakage, dents or gouges to the plastic housing and broken
optic windows. Damage to the switch/LED membrane are
presumed to result from mis-use or abuse. Tampering with
or removal of the caution or certification labels voids this
warranty.
Neither this warranty nor any other warranty, express or
implied, including implied warranties of merchantability,
shall extend beyond the warranty period. No responsibility is
assumed for any incidental or consequential damages. This
warranty gives you specific legal rights, and you may have
other rights which vary from state to state.

SAFETY WARNING
CAUTION: USE OF CONTROLS, ADJUSTMENTS OR
PROCEDURES OTHER THAN THOSE SPECIFIED HERE IN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
At all times, comply with the relevant Australian Safety
Standard AS2397 without limitation, including the following:
1. Do not look directly into the beam or allow other to do so.
2. Do not direct the laser at personnel or into areas where
eyes can be exposed to the beam.
3. Turn the laser o when not in use or unattended.
4. Operate the laser at a level other than eye level to reduce
risk of incidental exposure to others.
5. Use proper targets such as those supplied with the system.
6. Inform others working in a potenital exposure area
and install appropriate warning signs to suit the laser
classification such as a “Caution-Laser Light” sign.
These labels are attached to every aLine laser. These are not
to be removed or defaced.
LASER RADIATION-AVOID
DIRECT EYE EXPOSURE
LASER DIODE
WAVELEGNTH: 520NM
MAX. OUTPUT:<1MW
CLASS 2 LASER PRODUCT
CAUTION