Aline EMA 308 9173.81 User manual

Professional Headend Solutions
Operating instructions
EMA 308/ 407/ 408
EMA 508/ 608/ 708
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI →ASI(TS) & IP(TS)

2
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Content
1. Installing and operating instructions..........................................................................................................................3
1.1 Safety instructions.............................................................................................................................................3
1.2 Contact..............................................................................................................................................................3
1.3 General description of functions.......................................................................................................................4
 1.4Multiplexer/Re-multiplexer/PIDlter................................................................................................................5
2. Explanation of the functional elements......................................................................................................................6
2.1 Front view..........................................................................................................................................................6
2.2 Rear view...........................................................................................................................................................6
2.2.1 Input and output ports...............................................................................................................................6
2.2.2 Pole allocation of the audio sockets (EMA 308, 407, 408, 608) ...............................................................7
2.2.3 EMA variants with 48 V DC power supply.................................................................................................7
3. Operating instructions................................................................................................................................................8
 3.1CommissioningoftheEMA(EASY,withoutconguration)...............................................................................8
3.2 Basic settings on delivery (Factory settings)....................................................................................................8
3.3 Settings via Ethernet interface ..........................................................................................................................9
3.3.1 Network connection to the computer........................................................................................................9
  3.3.2Congurationmenu(HTMLpage) ..........................................................................................................10
3.3.2.1 Menu “System” ..........................................................................................................................10
3.3.2.1.1 System | Ethernet...........................................................................................................10
3.3.2.1.2 System |General ............................................................................................................11
3.3.2.1.3 System | SysParam........................................................................................................12
3.3.2.1.4 System | Maintenance ...................................................................................................13
3.3.2.2 Menu “Modules“.........................................................................................................................14
3.3.2.2.1 Modules | MAIN ASI .......................................................................................................14
3.3.2.3. Menu “Output“...........................................................................................................................17
    3.3.2.3.1Output|MUX/TTX/EIT................................................................................................17
    3.3.2.3.2Output|TS-Out..............................................................................................................17
3.3.2.3.3 Output | Expert Mode.....................................................................................................19
3.3.2.4 Menu “Streaming“......................................................................................................................20
3.3.2.4.1 Streaming | Interface......................................................................................................20
3.3.2.4.2 Streaming | Str-1 ............................................................................................................20
3.3.2.5 Menu “Status” ............................................................................................................................21
3.3.2.5.1 Status | Pg 190...............................................................................................................21
3.3.2.5.2 Status | Pg 192...............................................................................................................21
3.3.2.5.3 Status | Pg 196...............................................................................................................22
3.3.2.5.4 Status | Pg 197...............................................................................................................22
3.3.2.5.5 Status | Pg 198...............................................................................................................23
  3.3.3Transcoderoperatingmodes..................................................................................................................23
   3.3.3.1EMA408transcoder,MPEG-2toH.264/AVC............................................................................24
   3.3.3.2EMA407Transcoder,H.264/AVCtoMPEG-2 ...........................................................................25
  3.3.4Detailedconguration(forsingleandmultipledevicesystems)............................................................26
   3.3.4.1The1-devicesystem ..................................................................................................................26
  3.3.5Transportstreambitrate(TSoutbitrate),systembitrate .....................................................................28
 3.4Extendedconguration(individualsettings) ..................................................................................................29
  3.4.1TTXprocessing/VPS/WSS ....................................................................................................................29
3.4.2 Options....................................................................................................................................................29
3.4.3 Firmware updates (emergency program) ...............................................................................................29
3.4.4 Re-set to status on delivery (Factory settings)........................................................................................29
  3.4.5IntegrationintotheheadendmanagementsystemforB-LINEorC-LINE ............................................30
4. Appendix ..................................................................................................................................................................31
 4.1Technicaldata .................................................................................................................................................31
4.2 Accessories.....................................................................................................................................................32
4.2.1 Accessories as standard.........................................................................................................................32
4.2.2 Optional accessories...............................................................................................................................33
 4.3Glossaryandabbreviations ............................................................................................................................33
5.Bibliography .............................................................................................................................................................35
6. Document history.....................................................................................................................................................35
Declaration of Conformity.....................................................................................................................................36

3
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
1. Installing and operating instructions
1.1 Safety instructions
 • WheninstallingandcommissioningtheEMA,alwaysfollowtheaccompanyingdocumentsexactly.
 • Thedevicemayonlybeinstalledandsetupbyauthorizedpersons.
 • Whileinstalling,followtheEMCregulations.
 • Toensuretheequipmentcooling,aspaceofatleastonerackunitaboveandbelowtheEMAmusttobeprovided.
 • Thedeviceisprovidedtobeinstalledonsupportrailsina19“cabinet.
 • AllinstallationandcableconnectionareonlyallowedwhentheEMAisdisconnectedfromthepowersupply.
 • FollowtheprovisionsofDINEN50083,inparticular,DINEN60728-11[1]regardingsafetymustnotbeignored.
 • ThedevicearedeliveredunderprotectionclassicationI .Itisabsolutelynecessarytoinsertthemainsplugintoa
fused socket.
 • Warning
  WhenconnectingexternalvideosourcesthatdonotmatchthegroundpotentialoftheEMA,potentialdifferences
  cancausehumnoise(potentialequalizationorpotentialseparationnecessary).
1.2 Contact
Ifthereareanyquestionsorproblems,pleasecontact:
BLANKOM systems GmbH
Hermann-Petersilge-Str.1
07422BadBlankenburg
Germany
Phone:  +49(0)36741/60-0
Fax:   +49(0)36741/60-100
Service hotline: +49(0)7000/BLANKOM
    +49(0)7000/2526566
e-mail:   [email protected]
web:   www.blankom.de

4
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
1.3 General description of functions
TheEMAdevicesarecascadableMPEGencoderandtransportstreammultiplexer.Theygenerateapersonaldigitalprogram“bouquet“
inDVBtransportstream(TS)format.TheoutputsignalsareprovidedviaanASITSinterfaceandaseparatelyadjustableIPinterface.
ThesignalscanbebroadcastorfedinthecableTVnetworkbyusingappropriatemodulators.
Dependingontheapplication,thedeviceshardwareispre-congured.Viauserinterfacetheoperatingparameterscanbevariedwithin
a wide range.
EMA device variants:
EMA 308 9173.81 ASI / SDI/ A/V →ASI-TS&IP-TS(MPEG-2SD),85...264V~,110...370V–Powersupply
EMA 308 9173.82 ASI / SDI/ A/V →ASI-TS&IP-TS(MPEG-2SD),36...75V–Powersupply
EMA 308 9173.91 ASI / SDI/ A/V →ASI-TS&IP-TS(MPEG-2SD),85...264V~,110...370V–Powersupply(Customervariant)
EMA 308 9173.92 ASI / SDI/ A/V →ASI-TS&IP-TS(MPEG-2SD),RDSfunction,85...264V~,110...370V–Powersupply 
  (CustomervariantKDG)
EMA 308 9173.93 ASI / SDI/ A/V →ASI-TS&IP-TS(MPEG-2SD),RDSfunction,36...75V–Powersupply
  (CustomervariantKDG)
EMA407 9174.71 ASI-TS(H.264/AVC)→ASI-TS&IP-TS(MPEG-2SD),85...264V~,110...370V–Powersupply
EMA407 9174.72 ASI-TS(H.264/AVC)→ASI-TS&IP-TS(MPEG-2SD),36...75V–Powersupply
EMA408 9174.81 SDI/ASI-TS(MPEG-2) →ASI-TS&IP-TS(H.264/AVCSD/HD)
A/V → ASI-TS&IP-TS(H.264/AVCSD),85...264V~,110...370V–Powersupply1
EMA408 9174.82 SDI/ASI-TS(MPEG-2) →ASI-TS&IP-TS(H.264/AVCSD/HD)
A/V → ASI-TS&IP-TS(H.264/AVCSD),36...75V–Powersupply1
EMA408 9174.91 SDI/ASI-TS(MPEG-2) →ASI-TS&IP-TS(H.264/AVCSD/HD)
A/V → ASI-TS&IP-TS(H.264/AVCSD),85...264V~,110...370V–Powersupply1 (Customer variant)
EMA508 9175.81 SDI/ASI-TS(MPEG-2)/HDMI2→ ASI-TS&IP-TS(H.264/AVCSD/HD),AC3,85...264V~,110...370V–PSU
EMA508 9175.82 SDI/ASI-TS(MPEG-2)/HDMI2→ ASI-TS&IP-TS(H.264/AVCSD/HD),AC3,36...75V–Powersupply
EMA608 9176.81 SDI/ASI-TS(MPEG-2)→ASI-TS&IP-TS(H.264/AVCSD/HD),AC3,85...264V~,110...370V–Powersupply
EMA608 9176.82 SDI/ASI-TS(MPEG-2)→ASI-TS&IP-TS(H.264/AVCSD/HD),AC3,36...75V–Powersupply
EMA708 9177.81 SDI/ASI-TS(MPEG-2)/HDMI2→ASI-TS&IP-TS(H.264/AVCSD/HD),85...264V~,110...370V–Powersupply1
EMA708 9177.82 SDI/ASI-TS(MPEG-2)/HDMI2→ASI-TS&IP-TS(H.264/AVCSD/HD),36...75V–Powersupply1
1 AC3 pass through
2currentlyHDCPencryptionisnotsupported
EMA 308 EMA 407 EMA 408 EMA 508 EMA 608 EMA 708
Input channels 4 2 4 4 44
IN OUT
AV ASI+IP
MPEG-2 SD
√
SDI ASI+IP
MPEG-2 SD
√
ASI
H.264/AVC
ASI+IP
MPEG-2 SD
√
A/V ASI+IP
H.264/AVCSD
√
SDI ASI+IP
H.264/AVCSD/HD
√ √ √ √
ASI
MPEG-2
ASI+IP
H.264/AVCSD/HD
√ √ √ √
HDMI1ASI+IP
H.264/AVCSD/HD
√ √
SDI ASI+IP
H.264/AVCSD/HD,
AC3
AC3 pass
through
√ √ AC3 pass
through
HDMI1ASI+IP
H.264/AVCSD/HD,
AC3
√AC3 pass
through
Table1:Deviceversions       
1 currentlyHDCPencryptionisnotsupported

5
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Uptofourinputsignalsareencodedateachdeviceandfed-intheoutputtransportstream.TheASIinterfacetransmitstheoutput
signalasaDVBtransportstreamaccordingtoISO13818-1[5]atamaximumdatarateof214Mbps.Thesignalcanbesenteithertoa
cascadedEMAortoadownstreammodulator.BycascadingEMAdevices(upto8),atransportstreamwithupto32servicescanbe
producedortheseservicescanbeaddedtoanincomingtransportstream.
TheASI inputport processesa transportstream signal at a maximum rate of 214 Mbps. If the transport stream provides enough
transmissioncapacity,theencodedA/VsignalsareembeddedviatheintegratedmultiplexeraccordingtotheDVBstandard.
Theoutputsignalcontainsallrequiredprogramtablesandassociatedservices(PAT,PMTandSDT).ANITisgeneratedbutwillnot
containanynetwork-specicinformation.AsubsequentmodulatoradjuststheadaptationoftheNIT.
1.4 Multiplexer/ Re-multiplexer/ PID lter
For processing the incoming ASI transport stream a multiplexer has been integrated into the EMA device. On condition that the
transport steam provides enough transmission capacity,oradditionaltransportvolumeisachievablebyraisingthetransportstream
bitrate,newservicesand/orprogramcomponentscanbeadded.
Dependingonthecongurationofthe4inputinterfaces,theanalogueordigitalA/Vsignals(SDI)willbeconvertedintoDVBdataand
pooledtoastandardDVBsignaloraddedtotheDVBtransportstreambeingforwarded.
Theparametersnecessaryfortheinputinterfacesandthetransportstreamparametershavebeenpre-setatthefactory(»section 3.2).
Seesection3.3.4fordetailsofhowEMAcascadesystemsusingmultipledevicesarebroughtintouseandhowthetransportstream
canbemanipulatedfromtheHTMLuserinterface.

6
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
2. Explanation of the functional elements
2.1 Front view
Fig.1:Frontview-inthiscase:EMA408
POWER(greencoloredLED)
LEDon Device switched on
System(greencoloredLED)
LEDon Internal system components are ready for operation.
LEDashing Wrongparameterischosen/congurationerrorisrecognised.
LEDoff Internal fault
INPUT A, B, C, D(ambercoloredLED)
LEDoff Input port is deactivated.
LEDashing No standard signal is recognised at the input port.
LEDon Signal is recognised at the input port.
INPUT TS(ambercoloredLED)
LEDoff Input port is deactivated.
LEDashing ASI signal isn‘t recognised at the input port.
LEDon ASI signal is recognised at the input port.
Stream port
IP stream port RJ45, Ethernet 10/100/1000,UDP/RTP
2.2 Rear view
Fig.2a:RearviewofthedevicesEMA308,407,408,608
FACTORYSET
Fig.2b:RearviewofthedevicesEMA508,708
2.2.1 Input and output ports
VIDEO A, B, C, D Videoinputport,FBAS/SDI(congurable)
AUDIO A, B, C, D Audio input port, analogue, SPDIF*
ASI IN DVB transport stream input port
ASIOUT DVB transport stream output port
NET Ethernet interface, network connection point (device control, etc.)
RS232 Serialconnection(rmwareupdate,restorationofdeliverystatus)
FACTORYSET Resetting to delivery status (see section 3.4.5)
HDMI HDMIinput(EMA508,EMA708only)
*SPDIF:inputofadigitalaudiosignal;onlyavailable,ifthereareH.264/AVCencodermodules(EMA407/EMA408)

7
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
2.2.2 Pole allocation of the audio sockets (EMA 308, 407, 408, 608)
Theaudioinputportsaresymmetrical.Iftheyareusedasymmetrically,pin1and3mustbeallocatedassignallinesandpin4,5and2
as return lines (shielding/ ground).
Operating mode/ Functionality Pin Pin 8 = ground SPDIF Pin Operating mode/ Functionality
mono dual stereo 7 (n.c.) 6 (SPDIF)1) stereo dual mono
not in use
channel
B
right
channel
3(+) 1(+)
left
channel
channel
A
signal
5 (-) 4 (-)
Pin 2 = shielding
Fig.3:Poleallocation,audiosocket
1)SPDIF:inputofthedigitalaudiosignal;onlyavailable,ifthereareH.264/AVCencodermodules(EMA407/EMA408)
2.2.3 EMA variants with 48 V DC power supply
TheEMAisalsoofferedwitha48VDCPSU(EMAx08:917x.82,EMA407:9174.72).Makesurethatherethespeciedvoltagerange
andpolarityareobserved.
ThePSUontherearofthesedevices:
 Fig.4:48VDCpowersupply
7
3
5
6
1
4
8
2
DC connection ON/ OFF switch Fuse

8
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
3. Operating instructions
3.1 Commissioning of the EMA (EASY, without conguration)
Doallinstallingandconnectionworkwithoutmainsvoltage.It‘sabsolutelynecessarythatyoufollowthesafetynotes(»section 1.1).
Connecttheinputsforvideo,audio,HDMIandASIsignalsattheappropriateconnectionpointsontherearofthedevicewithsuitable
cables.
Assoonasallwiringisdone,thepowersupplycanbeconnectedandthedeviceswitchedon.TheoperatingstatusisshownbyLED‘s
on the front panel.
Warning:
Ondeliveryidenticalnetworkparametersforalldevicesarepreset.Thesettingandcongurationofmultipledeviceswithinanetwork
mustbedonestep by step (»section 3.3.1).
3.2 Basic settings on delivery (Factory settings)
WhendeliveredEMAdevicesareoptimalpreconguredaccordingtothehardwareassemblyandthemainusecase.AttheASIoutput
portatransportstreamisproducedwithabitrateof38Mbpsintowhichthedataoftheinputsignalswillbeincluded.The“ASIMain
Input” is not activated.
Thedeliverystatuscanalwaysbemadeby“Factorysetting“(seesection3.4.5).Allprogramdetailsandtransportstreaminformation
areneutralandcanbeadaptedtomatchtherequirementsofthecablenetworkoperator.
Tochangetheconguration,theHTMLuserinterfaceisprovidedviatheEthernetinterface(seesection3.3).Theadjustmentsofthe
installedencodercardsaresettotherespectiveencodermodeautomatically.ThebasicsettingsoftheEMAdevicesareshowninthe
followingtable:
EMA 308 EMA 407 EMA 408/ 508/ 608/ 708
IPaddress: 192.168.2.86
IPnetmask: 255.255.255.0
IPgateway: 0.0.0.0
SNMPtrap(IP): 0.0.0.0
Loginpassword: neu
IPaddress: 192.168.2.86
IPnetmask: 255.255.255.0
IPgateway: 0.0.0.0
SNMPtrap(IP): 0.0.0.0
Loginpassword: neu
IPaddress: 192.168.2.86
IPnetmask: 255.255.255.0
IPgateway: 0.0.0.0
SNMPtrap(IP): 0.0.0.0
Loginpassword: neu
General Selections:
PSImode: DVB
ASImaininput: OFF
(HardwareslotA..D: MPEG-2)
Slotoperatingmode:SDIemb.audio
Mappedchannel: OFF
IPoutstreaming: OFF
Slot Parameter:
Programname: Prog-A..D
Programlanguage: deu
Videosystem: PAL/SECAM(50Hz)
Systembitrate: 6000kbps
Audiobitrate: 320kbps
Audiomode: stereo
Videoformat: 4:3
Audiochannelpair: 1+2
Audiovolume: 0dB
Cableequalizer: OFF
TTXprocessing: Video-IN
VPS,WSS,CC: OFF
For the operating mode transcoder from
H.264/ AVC to MPEG-2 SD the following
is to be set:
General Selections:
PSImode: DVB
ASImaininput: OFF
(HardwareSlotA+C:H.264/AVC)
(HardwareslotB+D:MPEG-2)
SlotA+Cop.mode:decoder
SlotB+Dop.mode:intern
Mappedchannel: OFF
IPoutstreaming: OFF
Slot Parameter Slot A+C:
Videosystem: PAL/SECAM(50Hz)
Videoformat: 625/525
TSinput: SlotInput
InputserviceID: 0x.....(Auswahl)
Inputformat: HD1080i
Slot Parameter Slot B+D
Programname: Prog-B(D)
Programlanguage: deu
Videosystem: PAL/SECAM(50Hz)
Systembitrate: 6000kbps
Audiobitrate: 320kbps
Audiomode: stereo
Videoformat: 16:9
General Selections:
PSImode: DVB
ASImaininput: OFF
(HardwareslotA..D: H.264/AVC)
SlotA..Dop.mode:SDIemb.audio
Mappedchannel: OFF
IPoutstreaming: OFF
Slot Parameter:
Programname: Prog-A..D
Programlanguage: deu
Videosystem: PAL/SECAM(50Hz)
Videoformat: 625/525
Systembitrate: 6000kbps
Audiobitrate: 320kbps
Audiomode: stereo
Audiochannelpair: 1+2
Audiovolume: 0dB
Cableequalizer: OFF
TTXprocessing: Video-IN

9
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
EMA 308 EMA 407 EMA 408/ 508/ 608/ 708
Channel Mux:
ASIoutputmode: continous
Bytesperpacket: 188
TSoutbitrate: 38000kbps
TSID: XXXXX(deviceno.)
Providername: Provider
NetworkID: 100
OriginalnetworkID: 1
CreateTDT/TOT: ON
CreateNIT: dummy
Cascadenumber: 1
Devicewithincascade:1
Tableextension: OFF
Channel Mux:
ASIoutputmode: continous
Bytesperpacket: 188
TSoutbitrate: 38000kbps
TSID: XXXXX(deviceno.)
Providername: Provider
NetworkID: 100
OriginalnetworkID: 1
CreateTDT/TOT: ON
CreateNIT: dummy
Cascadenumber: 1
Devicewithincascade:1
Tableextension: OFF
Channel Mux:
ASIoutputmode: continous
Bytesperpacket: 188
TSoutbitrate: 38000kbps
TSID: XXXXX(deviceno.)
Providername: Provider
NetworkID: 100
OriginalnetworkID: 1
CreateTDT/TOT: ON
CreateNIT: dummy
Cascadenumber: 1
Devicewithincascade:1
Tableextension: OFF
Table2:Basicsettings
3.3 Settings via Ethernet interface
IfitisnecessarytochangethebasiccongurationortocreateacascadeofmorethanoneEMAdevicetocreateaDVBtransportstream
(seeFig.20),theparticularHTMLuserinterfacemustbecalleduponacomputerconnectedtothedevice(s).Allthesettingscanbe
madeviaInternetbrowser.Howtheuserinterfaceworksisalmostself-explanatory.Anyspecialfeaturesofusewillbeexplainedinthe
following chapters.
3.3.1 Network connection to the computer
System requirements:
• PC/laptopwithanEthernetinterface10/100Mbps
• Internetbrowser(suchasWindowsInternetExplorer,MozillaFirefoxorsimilar)
Making the connections:
TheEMAdevicehastobeconnectedtoPCnetworkusinganEthernetcable.Useacrossed-linkcableforadirectconnectiontoaPC.
TheIPaddressoftheEMAis192.168.2.86 on delivery.
InordertoaccessthewebinterfaceoftheEMAdevicefromaPC,thePChastobeinthesamesubnet(192.168.2.XXX;subnetmask
255.255.255.0),whereXXXisnotusedbyanyotherdeviceinthissubnet.IfmultipleEMAdevicesareconnectedtothesamenetwork
eachdevicemustbesettoitsownuniqueIPaddresstoavoidaddressconicts.
Afterthesesettings,theIPaddressofthePChastobeadjustedtomatchthenetwork.Nowthedevicescanbeaccessedviabrowser
with the new IP address.
Connection setup:
WhentheIPaddressforthedevicehasbeenenteredintotheaddresseldofthebrowser,aconnectionwillbemadetotherelevant
deviceandtheappropriatelog-inwindowwillbedisplayed:
Fig.5:Log-inwindow
As “serial number“a5-digitserialnumberofthedeviceisentered.Thisnumbercanbefoundontherearofthedevice.
Accesstothecongurationmenuispasswordprotected.Ondelivery,thepasswordis:neu.
Please note:
IfthepasswordortheIPaddressareunknownorhavebeenforgotten,pressingthe“FACTORYSET“keyontherearofthedevicewill
return the details to what they were on delivery (»section 3.4.5).
Thedevicewillthenhaveaccessandbasicsettingsasdescribedabove.Anysettingwhichhasalreadybeenindividualised,will,of
course,belost.

10
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
3.3.2 Conguration menu (HTML page)
Aftersuccessfulregistrationthecongurationmenuisdisplayed.Itisdividedintothetwofollowingsections:
System | Modules | Output | Streaming | Status.
Themenusarearearrangedastabsontheleft.Byclickingatthetabyouwillskipintheassociatedmenus.Thesemenusaresub-
dividedandsub-menusarearrangedaboveasregisters.Bypressingattheseyoucanswitchfromonetotheothersub-menus.
Ineachmenua„Help“buttoninthelowerpartoftheuserinterfaceleadsintoaseparatebilingual„help“window(German/English).
Thebutton„Savetodevice“setsandsavesthedonesettingsonthedevice.„Loadfromdevice“fetchestheonthedevicesaveddata
intothewebinterface.
Anything pre-set under “Factory Setting” is typed with an underline.
  Fig.6:Webinterface,startpageofthecongurationmenu
3.3.2.1 Menu “System”
Hereyoucongurethesystemparametersofthedevice.„System“isstructuredasthefollowing:
EtherNet | General | SysParam | Maintenance.
3.3.2.1.1 System | Ethernet
Fig.7:SettingsfortheEthernetnetworkinterface

11
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
use DHCP:[ON/OFF]
 AllocationofIPaddress,default:192.168.2.86
 “ON“ whenstartinguptheprogramanIPaddressviaDHCPserverisrequestedonce.Iftherequestfails,thedefaultIP
address is used.
 “OFF“ ThedefaultIPaddressisused.
IP address:[0.0.0.0...192.168.2.86...255.255.255.255]
 AdefaultIPaddressforthecasethat“useDHCP“issetto“OFF“,ornoDHCPservercouldbereached.
IP subnet mask:[0.0.0.0...255.255.255.0...255.255.255.255]
 ThemaskcorrespondingtotheIPaddress.
IP gateway: [0.0.0.0..255.255.255.255]
 IPaddressforapossiblyusedgatewayinthenetwork.Thedenitionofagatewayaddressisonlyrequiredifthedeviceisto
 sendSNMPtrapstoaserverthatisaccessibleviaagatewayonly.
SNMP Trap IP address: [0.0.0.0..255.255.255.255]
 IPaddresstoapossilbleusedSNMPtrapmanager.Importantdevicefunctionsareconstantlymonitoredandpossibly
 forwardedasanSNMPtraptoasuperiormanager.Dependingonhardware,thefollowingsystemmessagescanbesent:
ENCODER ASI-IN Device
EncA no input ASI-IN overrun Fan OFF
 EncAerror  EncoderTSoverrun FanON
EncB no input ASI-In no input Device has started
EncB error ASI-In error Reload Parameter
EncC no input Default error
EncC error
EncD no input
EncD error
3.3.2.1.2 System |General
Fig.8:Standardoperatingmode(EMA408,508,608,708)
Setting the operating mode is based on the equipped hardware. Changes in this section need to be saved (“Save to Device“) to
adapt the relevant conguration entries.
PSI Mode: [DVB/ATSC]
Multiplexer mode according to the national transmission standard
ASI Main Input:[OFF/Loop→TSOut/MuxwithIntern/Flt-DROP&MUX]
“OFF“
 Inputdeactivated;
 “Loop→TSOut“
 Loop-throughofthesignalASI-IN→TSOut;
“Mux with Intern“
AllservicesoftheTSattheASIinputcanbemultiplexedwiththeinternallygeneratedservicestoacommonTS.
 „Flt-DROP&MUX“
Selected servicesoftheTSattheASIinputcanbemultiplexedwiththeinternallygeneratedservicestoacommonTS.
 Theselectionofthelteredoutservicesisdonevia“DropServices“intheheaderoftheconguration.
Warning: If there are overlaps of the PID/ SID the relevant services of the TS from ASI-IN will be deleted. Toavoidthe
 consequencesofthisPIDcollision,usethemenu„tablescript“(p.18).AutomaticallyassignedPID‘softheinternalencoder
 A...Dcanbemodiedhere(PIDremapping).
Slot A..D (Encoder moduls): [OFF/CVBS/SDI,emb.Audio/SDI,analougeAudio/[ASI-TS]/[CVBS-SPDIF]/[SDI-SPDIF]/
 Intern/Transcoder/Decoder]
 Thehardwarecongurationisautomaticallydetected.Thepurposeoftheirpossiblemodesareprovided.
 “OFF“ Themoduleisdeactiviated.

12
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
“CVBS“ (available in EMA 308, 408, 608)
 TheinputsignalisananalogueA/Vsignal(SD).
 “SDIembeddedAudio“
 Theinputsignalisaserialdigitalvideosignal(MPEG-2onlySD-SDI)withintegratedaudio(AES-EBU,48kHz),
 teletext(WST/PAL)ispossible.
“SDI analog Audio“ (available in EMA 308, 407, 408, 608)
 InputsignalSDIwithpossibleteletextandanalogueaudioinput.
 [ASI-TS],[CVBS-SPDIF],[SDI-SPDIF](optionwithrestrictions):(available in EMA 308, 408, 608)
“CVBS-SPDIF“/ “SDI-SPDIF“
Processing of the CVBS/ SDI video signals with digital (SPDIF) audio signal (PCM).
“Intern“ (available in EMA 407)
 InternalinputoftheMPEG-2encoderisenabled(transcodermodeH.264/AVC→MPEG-2).
„CVBS-SPDIF, SDI-SPDIF“ (available in EMA 308, 408, 608)
Processing of the CVBS/ SDI video signals with digital (SPDIF) audio signal (PCM/ AC3)
 “Transcoder“*(available in EMA 408, 508, 608, 708)
 InputsignalisTSwithaselectedMPEG-2service.
“Decoder“
* (available in EMA 407)
 InputsignalisTSwithaselectedH.264/AVCservice(congurationoftheTSfeeding,seebelow.:parameter“Slot-A..D“)
*specialoperation,seesection3.3.3Transcoderoperatingmode
TS Player (Option):[OFF/PlayfromHDD]
 Ifaharddiskplayerisintegrated,thefeaturecanbeactivatedwith“PlayfromHDD“.
Mapped Channel (Dynamic PMT): [OFF/ON]
“ON“  AllowsaPMT(ProgramMapTable)inuenceinconnectionwithoptionTSplayer,forexamplefor
switching transmission windows in existing programs.
IP-Out Streaming:[OFF/SimpleUDP(rear)/RTP/UDP(front)]
“OFF“ deactivated
 “RTP/UDP“ Streamfunctionviaseparatestreamport(frontpanel),16congurablechannels.Congurationunder
“IP-Out Stream Interface“ (»chapter 3.3.2.2.8)
3.3.2.1.3 System | SysParam
Fig.9:Systemsettingsforrealtime,encoder,fancontrol
Local Time Offset (to UTC):
Thisisthedifferencebetweenlocaltimeand“CoordinatedUniversalTime”(e.g.Germany=1).
Daylight Saving: [ON,OFF]
“ON“ automatic daylight saving time switch
Encoder: Show Grid:[never,Auto(noinput),Force(Testmode),Auto(showblack)]
Encoder mode, if SDI input signal is failure.
 “never“: neverdisplaysatestimage,ifsignalisfailure,thelastvalidimageisfrozen.
 “Auto(noinput)“: automaticdisplayofatestimage,ifsignalisfailure
 “Force(TestMode)“: Testimageisconstrained,independentlyfrominputsignal
 “Auto(showblack)“: automaticdisplayofablackimageifsignalisfailure

13
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Encoder H.264-SD: [ShowLine23,SuppressLine23(WSS)]
“ShowLine23“:SD-SDIsignalisconvertedwithvisibleWSSline23inH.264
 “SuppressLine23(WSS)“:line23issuppressed.
H.264: [DecRST]: [OFF,ON@Cycl,ON@PMT]
 „ON@Cycl“: cyclicalsynchronizationofthedecryptionprocess
 „ON@PMT“: synchronizationofthedecryptionprocesswithadynamicPMTchange
MPEG-2: Audio Frames per PES Block:[1..4..8]
 Encoderparameterofaudioblocksize
FAN “ON“ above Temperature in °C:[0..50..100]
Switching threshold of the device fan.
3.3.2.1.4 System | Maintenance
Fig.10:helpfunctions
Set Password:
Thepasswordforthecongurationaccess
Rules:•max.8characters
 •upper-andlowercaseletters,numbers
 •nospecialcharacters
 •noumlauts
Fig.11:changepassword

14
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Set Date & Time:
Setting of date and time of the device.
 Fig.12:setdateandtime
Download MIB:
Allparameterscanbesetvia„SimpleNetworkManagementProtocol“.Thecorrespondingle„ME.mib“(Management
Information Base) for the management software is provided here.
Note:TheMIBisautomaticallygeneratedaccordingtothecongurationandprovidedonthedevice.Thatmeans,ifyou
make changes in the menu „General Selections”yourstmustuploadthenewMIBforfurthersettingswithSNMP.
Device Restart:
Restartofthedeviceandtheinterfaceissetupwiththestoredvalues.Thereisnoavailabletransportstreamsignalfor10sec.
Factory setting:
 Thecongurationofthedeviceisresettothefactorydefaultsettings.Thereisnoavailabletransportstreamsignalfor10
 seconds.TheIPaddresswillbepreserved.
Note:The„Factorysetting“buttonontherearofthedevicechangestheIPaddressto192.168.2.86andthepasswordto
„neu“.
Activate Option:
 Chargeablesoftwareoptionscanbeenabledhere.Theacquiredactivationcodemustbeenteredhere.
 Fig.13:activationofsoftwareoptioins
Format HDD/SDC:
Deletes alldatafromHDD/SDC.This action cannot be undone!Itwilltakeabout30seconds
while the output has no valid signal.
3.3.2.2 Menu “Modules“
Thisisthecongurationmenu.„Modules“isstructuredasthefollowing:MAIN ASI | Slot A | Slot B | Slot C.
3.3.2.2.1 Modules | MAIN ASI
Drop Filter: Select Services:
Linkto call the “drop-list“ for the suppression of services from
MAIN ASI-IN.
(»System→General“ „ASI Input Mode“ selection: “Flt-DROP &
MUX“, see »chapter 3.3.2.1.2).
Fig.14:SettingoftheASIinput(withservicemodelter)

15
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Filterfunctionfortheactivatedinputtransportstream(TSIN)toremoveunwantedservices(programs).Thefunctionisonlyavailableif
in“GeneralSelection“theeld“ASIMainInput→Flt-DROP&MUX“isselectedandenabledwith“Send“.
Providedisatableofallpresentservices(programs)attheinput.Theselectedserviceswillberemovedfromthetransportstream.
Fig.15:Opendrop-table.AllpresentservicesattheASI-INaredisplayed.Themarkedservicesinthecolumn“Drop“arenotforwarded.
Cable Equalizer:[OFF,ON]
 Usinglongercablestofedinthesignal,anequalizercanbeswitchedonthatinput.
Source of Intern TS: [MainASI-IN/ASI-Out]
Selective function for internal signal feed for transcoder/ decoder operation mode.
3.3.2.2.2 Modules | Slot-A | Slot-B | Slot-C | Slot-D
In this menu you make the settings for the encoder A. All following setting notes apply to the encoders B ... D.
Fig.16:Settingofencoderparametersfortheindividualinputchannels Fig.17:Settingofencoderparametersfortheindividualinputchannels
(EMA 408, SDI input signal) (EMA 308, analogue input signal)
Program Name:
 Assignanameforeachimportedortransformedprogram.Theprogramnameisdisplayedontheterminalequipment(TV).
 Theprogramnamemustbeuniqueandmayexistonlyonceinacascadeofencoders.Themaximumlengthis16characters.
Program Language:[deu,eng,...]
 Identiesthelanguagefortheaudiodatastreamandteletext.ItshouldcorrespondtoISO639-2[4].
Video System:[PAL/SECAM(50Hz),NTSC(60Hz),OFF(DigitalRadio),OFF(AudioChannel)]
 Setsthetypeoftheinputvideosignal.Thefollowingsignaltypesareprocessed:at50Hz/25fps-PAL(B,D,G,H,I,N,Nc)
 andSECAM;at60Hz/30fps-NTSC(J,M,4.43)andPAL(M,60).Inthe“OFF-Radio”setting,thevideosignalisignoredand
 adigitalradiochannelisgenerated.Withthe“TableExtension“thiscanbeassignedtootherencodersasanadditionalaudio
channel.
Video Format: [SD576i/480i,HD720p(1280x720),HD1080i(1920x1080)]
 Thechosencongurationmustmatchtheparametersoftheencoderinputsignals.
Aspect Ratio (SD only!):[4:3,16:9,UseWSS]
 Set,howthevideoinputsignalfortheMPEGheadershouldbeinterpreted.„UseWSS“evaluatesonly„16:9Fullformat“.
 Anythingelseisstreamedina4:3format.RequirementisVPS-WWS=WSSorVPS+WSS
System Bitrate:[1000..6000..15000kbps]
 Herethebandwidthisestablishedforaudio,videoandtabledataintherelevantencoder(slot).Thevalueisonlyanupper
 limit.Thebitrateactuallygeneratedwillbeslightlyslowerandwillnotbeabsolutelyconstant.

16
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Audio Bitrate:[64..320..384kbps]Thisdeterminestheaudiodatabitrate.Itisanelementofthesystembitrate.
Audio Mode:[Stereo/JointStereo/DualChannel/Mono/useVPS]
 identiesthetypeofaudiodata.
 “useVPS“adopttheidenticationtransferredwithintheVPSsignalintotheMPEGdatastream(audioheader).
Audio Typ: [PCM→MP-2, PCM→AC3, AC3 pass through, PCM→E-AC3(DD+),E-AC3passthrough]
„PCM→MP-2“: SoundsignalischangedinMPEG-1,Layer2format(DVBstandard)
„PCM→AC3“: SoundsignalischangedinAC3format(available in EMA 508, 608)
 „AC3passthrough“: AnAC3soundsignalexistingininputsignalisadoptedintotheoutputsignal.
(available in EMA 408, 508, 608, 708)
„PCM→E-AC3(DD+)“:SoundsignalischangedinE-AC3(DD+)(available in EMA 508, 608)
 „E-AC3passthrough“:theintheinputsoignalincludedE-AC3signalisappliedtotheoutputsignal.
(available in EMA 408, 508, 608, 708)
Audio Channel Pair (SDI):[1/2..15/16]
 WhenSDIwithembeddedaudioisbeingtransmitted,itcanbeselectedanaudiosignalpairfortheprocessing.
‚dB‘ Audio Volume (SDI):[-6..0..6]
Decrease or increase the audio level.
Audio Input Impedance (analogue):
 Inputimpedanceswitch:600Ω/ 10 kΩ
Audio Input Level (analogue):
 Adjustmentoftheaudiolevelattheinput.
TTX Processing:[OFF,Video IN,Intern(ViTex)]
“OFF“
Feature deactivated.
“Video IN“
 TheteletextofthevideoinputsignalisconvertedtoDVBcompliantdatapacketsandistransmittedintheTS.
“Intern“
 Withadditionalsoftware(Vitex),aseparateteletextcanbegenerated(onlyavailableforSDvideosignals).
VPS-WSS-CC:[OFF/VPS/WSS/VPS+WSS/ClosedCaptions]
 VPSand/orWSSlinesofthevideoinputsignalareconvertedtoDVBcompliantdatapacketsandtransmittedinthetransport
 stream.ForNTSCinputsignals“ClosedCaptioning“canbeprocessed-onlyavailableforSDvideosignals
(available in EMA 308, 407).

17
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
3.3.2.3. Menu “Output“
Inthismenuyoumaketheoutput-relatedcongurationofthedevice.
3.3.2.3.1 Output | MUX / TTX / EIT
Fig.18:Parametersettings“AdditionalData→MUX“
Create EIT:[OFF(LoopfromASI)/ON(ownEITonly)/ON(p/fonly)/ON-Line-p/f]
“OFF“
 EITforwardingfromMAINASIIN
“ON“
 OptionsonlyinconnectionwithTSplayerorwithadditionalsoftware
Hbb TV: Create AIT [OFF,ON(xedlink)]
 „ON(xedlink)“: TheAIThasaxedlinktoaHbbTVserver
»www.vitex.tv/hbbtv_cong.html
3.3.2.3.2 Output | TS-Out
Fig.18:Parametersettingsforthetransportstreamconguration
TS Output Mode:[Continuous/Burst]
“Continuous Mode“
 Allthebytesintheoutputstreamhaveaxedtemporaldistancefromeachother.Themaximumdatarateinthismodeis
 98Mbps.
“Burst Mode“
 Allbytesofapacketaresentwithoutaspace,asaburst(27MHz).Thebitrateisenforcedbythedistancebetweenthe
 packets.Possibleisamaximumof214Mbps.
Note: For an active IP output only the continuousmodeisavailable,formaximal98Mbps.
Bytes per Packet:[188/204]
 FortheTS-Out188or204bytesperpacketcanbeselected(mode„LoopIN→OUT“always188).
TS OUT Bitrate:[1000..38000..214000]
 Theoutputbitratecanamountto1,000..214,000kbps.
TS-ID (PAT, SDT, NIT, EIT):[1..65535]
 (TransportstreamIdentier)Factorysetting=devicenumber.ThisistheIDofthegeneratedtransportstreaminthetransponder.
 AlldevicesofacascademustusethesameTSID(»chapter 3.3.4.2).

18
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
Provider Name:[Provider]
 Forthegeneratedtransportstreamthe“ProgramProvider“canassignaname.ThenameforaparticularTSIDshouldbethe
 sameinalldevicesinacascadedsystem.Thelengthofthenameislimitedto16characters.
Network ID:[1..100..65535]
 Uniqueidentierforthenetwork,e.g.thenumberofthecablenetwork.ThenetworkIDofalltransportstreamsgeneratedin
 anetworkshouldbethesame.
Original Network ID:[1..65535]
Information to identify the origin.
Create TDT/ TOT:[OFF,ON]
 generatestimecontrolleswiththehelpoftheinternalRTC(RealTimeClock)andthe”LocalTimeOffset“
Create NIT:[OFF,dummy,Cable,Satellite,Terrestrial]
 “OFF“ NoNIT(networkinformationtable)isgenerated.
 “dummy“ ThemultiplexercreatesanemptyNITasplace-holder(extendablewithtablescript)
 “Cable“,“Satellite“,“Terrestrial“
  TheNITisproducedwiththeappropriatespecicationbutwithoutanydetailsoffrequency.
Cascade Number within Network:[1..64]
 Cascadenumber:todistinguishequipmentinstalledcascadewithinatransmissionnetwork.Itmustbethesamenumberfor
 alldevicesofacascadeanditservestogenerateuniqueprogramnumbers(designatedbyserviceID),»chapter 3.3.4.2
Device within Cascade:[1..8]
 Devicenumber:todistinguishtheinstalleddeviceswithinacascade.Itisusedtogenerateuniqueprogramnumbers(service
ID) and PID‘s automatically.
Table Extension:[OFF,ON]
 Extensionofthedevicecongurationviascriptprogramming(expertmode,forexampletoaffecttheautomaticgeneratedPID
and SID).
“OFF“ no script processing
 “ON“ Providingthefunctioncall“TableScript“intheheaderoftheconguration.Scriptprocessingisenabled.
Notes:PID/SIDwillbeassignedtotheconguredslots(programs,channels)automaticallyaccordingtoaxedsystem.Byproviding
uniquedevicenumbersinacascadeaswellasclearcascadesnumbersensuresthatthevaluesdonotoverlap.Are“foreign“transport
streamsonASIinputprocessed,thereisthesuppressionofsuchsignalsbyoverlappingtheSID/PIDvalues.Toavoidthis,thedevice
congurationmustbeadapted.Whereappropriate,withtheoption“TableExtension“anindividualassignmentwithintheunitgenerated
PID/SIDisnecessary(»table4inchapter3.3.4.2).

19
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
3.3.2.3.3 Output | Expert Mode
Hereyoucanprogramspecialcongurationsviatablescript.Activatethefunctionunder„Output →TS-Out”(»chapter 3.3.2.3.2)
Table Script-conguration of parameters outside the default values
Theoption“TableExtention“providesatoolwithwhichspecicDVBsystemparametersoutsidethegivenrangeinthewebinterface
canbesetorchanged.Activatethefeatureinthemenu“Output|TSOut“→“TableExtension“andsavetheconguration(“Save“or
“Savetodevice“).Nowa“ScriptTable“buttonisdisplayedwhichleadstothescripteditor.
Fig.20:Openscripteditorofthewebinterfacewithprepared“empty“script
Scriptstructure:
- the key lines #SA and #SEnd are condition
-eachsection(startingwith#)mustbeincludedonlyonce
-aNITsectionisonlyfunctionalwhenthedevicecreatesitsownNIT.Inthiscase,allNITofASIINaredeleted(It‘simpossibletomix
externalandinternalNIT).
-spacesaredelimitersbeforeorbetweenthewords,theyareafactorwithoutanyinuence
-asemicolon“;“openesthecommentsection.Valuescanbedecimal,hexadecimalandexpressedasabytevaluewith“A“.
-Theactivationofascriptisdonebypressingthe“SendScript“button.Changedvaluescanbereviewedatthetransportstreamoutput.
-Thebasicfunctioncanbecheckedviathestatuspage190th.Inthelowerpartofthetableoftheerrorstatusofthescript
processing TblErr:isdisplayed:
0:SkriptOK
2:ErrorinNITsection
8:ErrorinCHNsection(x=0..3forCHNA..D)
Thearchivingorthecreatingofabackupscriptcanonlybedonebycopyingtherelevantlinesandsavingtheminatextle.
Example of a scripting application:
 #CHN:A
SID = 1010 ; setstheserviceIDto1010
 PMT=0x400; setsthePMTPIDto1024(400Hex)
 #CHN:C
Bright = 20 ; ThebrightnessofthecompositesignalappliedatinputCisraisedtothevalue20,
Thevaluesrangeisfrom-127to+127.
 PMT=100; setsthePMTPIDto100
 #NIT
 LCN=20,1010; setsthelogicalchannelnumberoftheservice1010to20.
“Reset“ of scripts
Ifthescriptversiondoesn‘trun,youcanenforceafactorysettingforthescriptbyconductingthefollowingsteps:
- delete your complete script
-sendtheblankwindowtothedevice
-pressthe“TableScript“buttontocalltheeditorwiththedefaultscript

20
EMA x08/407
Part No: 917x.xx
ENCODER/ MULTIPLEXER
ASI / SDI/ A/V →ASI(TS) & IP(TS)
ASI / HDMI → ASI(TS) & IP(TS)
ALINE
3.3.2.4 Menu “Streaming“
HerethecongurationoftheIPstreamportsaredone.TheoutputoftheIPstreammoduleisallocatedviaaseparateRJ45socketat
thefrontpanel,paralleltotherearwardASIoutput.Itcanbeprogrammedindividuallydependingontherequirementsofthestream.
3.3.2.4.1 Streaming | Interface
In this menu you can make individual settings of the streaming
modulefortheIPAddress,theIPNetMask,IPGateWayadress.
Fig.21:Parametersettingsoftheethrnetinterface
3.3.2.4.2 Streaming | Str-1
Hereyouconguretherststreamingchannel.Thesettingsfortheoverall16possiblestreamingchannelsaremadethesameway.
Eachstreamcan be dened as amulti program stream or as a single program stream.Itruns, accordig to theIPaddresseld
specication,eitherasMulticast or as Unicast.
Thesettingscanbemadeseparetlyforeachstreamingchannel.
Example1:
•streamno.=1
•streamactivated
•transmitstothetargetIP192.168.10.78,port6200
•withUDPprotocol
•FECmode(forUDPwithoutfunctionallity)
•„present/following“informationareappliedfromtheTSEIT
 table
•serviceselection=0:appliesallservicescontainedintheASI
 TS(multi program transport stream, MPTS)
•TSID=0:IDremainsunchanged
•NetworkID=0:IDremainsunchanged
•userdatarate=0:TSoutbitrateisadoptedunchangedinto
 theIPstream[0...65535max]
•UserDatarate≠0:»chapter 3.3.2.3.2
Fig.22:IPstreamconguration(example1)
Example2:
•streamno.=2
•streamactivated
•transmitstotargetIP192.168.10.78,port6200incl.RPT
protocol
•FECmodeL=5(communicatewiththereceiverviaRTP
 protocollwithinerrorcorrectionmodeL=5.Thereceivermust
 beconguredwithidenticalsettings and has to support the
correction mode.)
•FECmodeD=0(correctionmodeisdisabled)
•„originalEIT“informationareappliedfromtheTSEITtable
•singleserviceselection=16:theservicecontainedintheASI
 TScanalsobeselectedviathelink„Selection“.Itisprovided
on channel 2 of the IP stream (Single program transport
stream, SPTS)
Fig.23:IPstreamconguration(example2)    •TSID=4:TheTSIDissetto4
•networkID=100:ThenetworkIDissetto100
 •userdatarate=8000:independentlytothedatacontent,
  8000KbpsareprovidedwithintheIPstream