ADTRAN Frameport 768 User manual

The benefits of Frame Relay have become apparent to thousands of business
users who demand multiple site, high speed connectivity for data networks. As
Frame Relay services continue to grow, network service providers are looking for
more efficient ways to utilize existing frame switches.
ADTRAN’s FramePort products offer high speed, high port density access to
frame relay switches. Using ADTRAN BR1/10 channel bank technology, the
FramePort interleaves bursty data traffic from many users into a single non-
channelized DS-1, increasing the efficiency of the service providers’ broadband
facilities and frame switch resources. The FramePort transforms the BR1/10
channel bank from a Time Division Multiplexer to a Frame Relay Data Multiplexer,
offering higher port density and higher subscriber line speeds over current deploy-
ment methods. By interleaving data traffic into the DS-1 on a statistical basis, the
architecture is not constrained by rate or physical slot restrictions, allowing a
single shelf to be fully populated.
The BR1/10 FramePort 768 is a single BR1/10 channel card equipped with an
SDSL interface capable of port speeds ranging from 128 kbps to 768 kbps. A single
DS1 can statistically multiplex ten users at 768 kbps each, yielding 5:1 concentra-
tion over standard time-division multiplexing techniques.
ADTRAN offers SDSL customer premise equipment (CPE) to complement the
BR1/10 FramePort 768, producing an end-to-end solution for the user demanding
high speed frame relay connectivity. Both the BR1/10 FramePort 768 and BR1/10
Dual FramePort 144 can be deployed within the same channel bank.
The FramePort series is centrally managed through ADVISION, ADTRAN’s
telco management solution running over HP OpenView or through remote Telnet
sessions, perfectly sufficient for smaller installations. Physical layer connectivity is
checked using loopback capabilities built into the FramePort products.
ADTRAN’s Frame Access product line enables frame relay service providers to
build into their network the latest SDSL and IDSL technologies so in demand by
today’s progressive business customer.
PRODUCT FEATURES
■Multiplexes up to 10 SDSL
interfaces into a single DS-1
■Standard ADTRAN BR1/10 form
factor
■128 kbps to 768 kbps for each
subscriber line
■Automatic or provisionable
DLCI assignment
■SNMP manageable
■32 PVCs per port
■Standard 12 kft SDSL local loop
range
■Software upgrade via inband
Telnet or SNMP
■FECN, BECN and QoS support
■Built-in test capability
BR1/10 FRAMEPORT 768
FRAME LEVEL MULTIPLEXING PRODUCT

Product Specifications
LOOP INTERFACE
Interface
■1 SDSL interface per card
Data Rates
■128 to 768 kbps
Signal Format
■2B1Q
ENVIRONMENTAL
Operating Temperature
■–40° to +70° C
Relative Humidity
■Up to 95% non-condensing
Indicators
■Network
■Loop
Physical
■2.5" H x 0.625" W x 9.375" L
Power
■No bank fill restrictions
Frame Relay Interface
■Conforms to RFC 1490
■Compatible with FRF, ANSI T1.617 Annex D,
and ITU TQ.933A
CORPORATE OFFICE
ADTRAN, Inc.
901 Explorer Boulevard
P.O. Box 140000
Huntsville, AL 35814-4000
800 9ADTRAN
256 963-8000
fax: [phone]
fax back: 256 963-8200
e-mail: [email protected]
web site: www.adtran.com
REGIONAL OFFICES
Atlanta, GA
800 332-6945
Chicago, IL
877 787-0785
Dallas, TX
800 471-8648
Denver, CO
800 471-8651
Irvine, CA
800 788-5408
Kansas City, KS
800 471-8649
Philadelphia, PA
800 471-8656
San Antonio, TX
888 223-7671
Seattle, WA
888 727-4920
INTERNATIONAL
CONTACTS
Asia Pacific/Australia
852-2824-8283 (Hong Kong)
Canada
800 232-6811
Caribbean/Latin America
954 746-5355
All other International
inquiries
256 963-2500
ADTRAN is an ISO 9001
registered company.
Printed in the U.S.A. on recycled paper.
61150302L1-8A October 1998
©1998 ADTRAN, Inc. All rights reserved.
Ordering Information
EQUIPMENT PART #
BR1/10 FramePort 768..........................1150302L1
Specifications subject to change without notice.
Frame Relay
Network
High Speed
User Lines
up to 10
subscribers
at 768 kbps 1x BR1/10 Channel Bank
with BR1/10 FramePort 768
Frame Relay Concentrator
Non-channelized DS-1
Frame Relay
Network
Up to 20 SDSL
subscribers
at 128 kbps
to 768 kbps 2x BR1/10 Channel Bank
with BR1/10 FramePort 768
Frame Relay Concentrator
DS-1 #1
DS-1 #2
Frame Relay
Network
Up to 10 SDSL
subscribers
at 128 kbps
to 768 kbps
BR1/10 EV (Environmental Housing)
with BR1/10 FramePort 768
for remote locations
LP1
LP2
DSX
ALM
LBK
399
DSX-1
LB0
R
S
2
3
2
266
533
133 0
EXT
Non-channelized
DS-1
HDSL
HTU-C