AlkaViva Vesta H2 User manual

Congratulations on Your New Purchase.........................................................................
Important Safety Warnings and Precautions................................................................
Let’s Take a Tour of Your H Series Ionizer.......................................................................
Installation Procedure...........................................................................................................
Operating Your Ionizer..........................................................................................................
Manually Adjusting the Power...........................................................................................
Ionizer Performance Factors...............................................................................................
Using Ionized Water...............................................................................................................
How to Replace the Filters...................................................................................................
How to Add Optional Calcium or Scale Guard Inserts...............................................
How to Install Optional In-Line Sediment Filter...........................................................
How to Operate your Quick Connect Fitting................................................................
Using the Cleaning Filters....................................................................................................
Troubleshooting Guide.........................................................................................................
03
04
06
08
11
13
14
15
18
19
19
19
20
21

Dust Filter

For detailed installation instructions, see pg. 19.
Arrow indicates
direction of water
ow.

NOTE: For optional In-line Sediment Filter installation instructions, see pg. 19
before completing step 2.

NOTE: For optional In-line Sediment Filter installation instructions, see pg. 19
before completing step 2.

How to Install Optional In-Line Sediment Filter
Consider using the In-line Sediment Filter if the aerator on your faucet needs regular cleaning, meaning there is sediment in
your water. An In-line Sediment Filter is included with all ionizer models. Install the In-line Sediment Filter on 1/4”tubing
somewhere between your source water and the tap water inlet (arrow located on lter indicates direction of water). Cut
tubing according to your installation needs. See photos below.
1. In-line Sediment Filter
attaches to 1/4”tubing as
pictured.
2. Install shortest part of tubing at
Tap Water Inlet.
3. In-line Sediment Filter installed.
Your In-line Sediment Filter may look dierent than the one pictured. Installation is the same.
Maintenance: When the water ow of your ionizer slows down, detach your In-line Sediment Filter from 1/4” tubing and
rinse under tap water for 1 minute or so. Re-install.
How to operate your Quick Connect Fitting
Install: Insert 1/4”
tubing into Quick
Connect Fitting
and PUSH IN rmly until
it can’t go further.
Removal: Hold Quick
Connect Fitting end with
thumb and index nger.
Press in on the ring while
pulling out the 1/4” tubing
in opposite direction.