ALLIANCE BF3JGBJG403UN01 User manual

Programming
Frontload Washer
Refer to Page 10 for Model Identification
AB C
FLW92R_SVG
Original Instructions
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 805405ENR5
June 2016

WARNING
Failure to install, maintain, and/or operate this ma-
chine according to the manufacturer's instructions
may result in conditions which can produce bodily
injury and/or property damage.
W030
WARNING
For your safety and to reduce the risk of fire or an
explosion, do not store or use gasoline or other
flammable vapors and liquids in the vicinity of this or
any other appliance.
W022
NOTE: The WARNING and IMPORTANT instructions ap-
pearing in this manual are not meant to cover all possi-
ble conditions and situations that may occur. It must
be understood that common sense, caution, and care-
fulness are factors which cannot be built into these
washers. These factors MUST BE supplied by the per-
son(s) installing, maintaining, or operating the washer.
Always contact the distributor, service agent, or the manufacturer
about any problems or conditions you do not understand.
Read all instructions before using washer.
This product uses FreeRTOS V7.2.0 (www.freertos.org).
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
3 Part No. 805405ENR5

Table of Contents
Model Identification..............................................................................10
Preliminary Information....................................................................... 11
About the Control......................................................................................... 11
Glossary of Terms......................................................................................... 11
Power Failure Recovery.................................................................................11
Communications........................................................................................... 11
Infra-red Communications (Optional) ......................................................... 11
Serial Card Reader Communications (Card Models Only)............................. 11
Network Communications.......................................................................... 11
Control Identification........................................................................... 12
Select Cycle Pads..........................................................................................12
START Keypad............................................................................................ 12
Select Cycle Modifier Pads............................................................................ 12
Display Identification............................................................................14
Light Emitting Diodes (LEDs)....................................................................... 14
CYCLE LED............................................................................................ 14
WASH LED..............................................................................................14
RINSE LED..............................................................................................14
SPIN LED................................................................................................ 14
INSERT COINS/CARD LED..................................................................... 14
DOOR LED..............................................................................................14
A LED..................................................................................................... 14
B LED......................................................................................................14
C LED......................................................................................................14
7-Segment Digits.......................................................................................... 14
Washer Operation.................................................................................15
Power Up.....................................................................................................15
Ready Mode.................................................................................................15
Partial Vend Mode........................................................................................ 15
Additional Vend Mode.................................................................................. 15
Start Mode................................................................................................... 15
End of Cycle Mode....................................................................................... 15
Door Locking Mode......................................................................................15
Door Unlocking Mode...................................................................................15
Cycle Sequence............................................................................................ 15
Closing Washer Door.................................................................................... 16
© Published by permission of the copyright owner.
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed
written consent of the publisher.
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
4 Part No. 805405ENR5

Signals.........................................................................................................16
Changing Cycles...........................................................................................16
Pause Mode..................................................................................................16
Delayed Start Setup (OPL Only).................................................................... 16
Delayed Start (OPL Only)..............................................................................16
Auto Flush Mode.......................................................................................... 17
Overflow Mode............................................................................................ 17
Lockout Mode.............................................................................................. 17
Shutdown Mode............................................................................................17
Power Failure Display Mode..........................................................................17
Special Features ...................................................................................18
Programming Control....................................................................................18
Collecting Audit Information......................................................................... 18
Testing Machine and Control Functions.......................................................... 18
Rapid Advance Feature................................................................................. 18
Clearing the Vend Feature .............................................................................18
Communications Mode..................................................................................18
Coin Drop.................................................................................................... 18
Start Pulse Operation.....................................................................................18
Service Door and Coin Vault Openings........................................................... 19
Break-In Alarm.............................................................................................19
Special Vend.................................................................................................19
OPL Mode................................................................................................... 19
Drop-Off Mode.............................................................................................19
Low Power/Auto-Shutdown Option................................................................19
Temperature Display..................................................................................... 19
Out of Order Mode........................................................................................19
Network Node Number Display Mode............................................................ 19
Error Display Mode...................................................................................... 19
Opening the Service Door..................................................................... 20
Stacked Washers and Dryers, 10 Degree Front Control Washers and Coin Rear
Control Washers........................................................................................20
Rear Control Washers with Card Reader......................................................... 20
OPL Models.................................................................................................21
Preparing for Manual Mode........................................................................21
Entering the Manual Mode................................................................... 23
How to Enter the Manual Mode......................................................................23
Manual Mode Navigation.............................................................................. 23
Programming Control...........................................................................25
What Can Be Programmed.............................................................................25
Programmable Options Available................................................................... 25
Vend Price 1 AtS 1........................................................................................44
Vend Price 2 AtS 2........................................................................................44
Vend Price 3 AtS 3........................................................................................44
Vend Price 4 AtS 4........................................................................................44
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
5 Part No. 805405ENR5

Vend Price 5 AtS 5........................................................................................44
Vend Price 6 AtS 6........................................................................................45
Cycle Modifier Key 1 B Vend Price Adder ACNP 1.........................................45
Cycle Modifier Key 2 C Vend Price Adder ACNP 2.........................................45
Vend Price Decimal Point Ats dP....................................................................46
Coin 1 Value dEn 1....................................................................................... 46
Coin 2 Value dEn 2....................................................................................... 46
Start Pulse Value PLSE..................................................................................46
Start Pulse Mode PLSNod............................................................................. 47
Programmable Output Type AtyPE.................................................................47
Default Cycle dFtCyC................................................................................... 48
Card Reader Display Control CArd................................................................ 48
Audio Signal AUdio......................................................................................49
How to Program the Audio Signal...............................................................49
How to Read Audio Signal Table................................................................ 49
Network Node Number nodE......................................................................... 51
Error Code Programming Error-..................................................................... 51
Temperature (Fahrenheit/Celsius) (Heater/Temp Sensor only) tP F C................. 55
Hot Water Temperature (Heater/Temp Sensor only) FL Hot.............................. 56
Warm Water Temperature (Heater/Temp Sensor only) FL HC........................... 56
Cold Water Temperature (Heater/Temp Sensor only) FL CLd............................56
Cool Down Temperature (Heater/Temp Sensor only) CooLdn........................... 56
Low Water Level FL Lo................................................................................ 56
Medium Water Level FL NEd........................................................................ 57
High Water Level FL Hi................................................................................ 57
Flush Out Time for Fill Step FLSH t...............................................................57
No Refill After Time for Agitate Step norF t....................................................57
Set Real-Time Clock rtC-...............................................................................58
Set Daylight Savings Time dLS-.....................................................................58
Special Vend 1 Days Enable SP1 1................................................................. 58
How to Read the Days Enable Value Table...................................................59
How to Program Special Vend 1 Start Minute SP1 2..................................... 64
How to Program Special Vend 1 Start Hour SP1 3........................................ 64
How to Program Special Vend 1 Start Date SP1 4.........................................64
How to Program Special Vend 1 Start Month SP1 5......................................64
How to Program Special Vend 1 Start Year SP1 6.........................................65
How to Program Special Vend 1 Length in Hours SP1 7................................65
How to Program Special Vend 1 End Date SP1 8..........................................65
How to Program Special Vend 1 End Month SP1 9.......................................65
How to Program Special Vend 1 End Year SP1 10........................................ 65
How to Program Special Vend 1 Vend Price 1 SP1 11................................... 66
How to Program Special Vend 1 Vend Price 2 SP1 12................................... 66
How to Program Special Vend 1 Vend Price 3 SP1 13................................... 66
How to Program Special Vend 1 Vend Price 4 SP1 14................................... 66
How to Program Special Vend 1 Vend Price 5 SP1 15................................... 66
How to Program Special Vend 1 Vend Price 6 SP1 16................................... 67
How to Program Special Vend 1 Wash Status Agitate Steps Added Minutes SP1
20.........................................................................................................67
How to Program Special Vend 1 Wash Status Agitate Steps Subtracted Minutes
SP1 21.................................................................................................. 67
How to Program Special Vend 1 Cycle Modifier Default Value SP1 22.......... 67
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
6 Part No. 805405ENR5

How to Program Special Vend 1 Cycle Modifier B Key #1 Vend Price SP1 23...
67
How to Program Special Vend 1 Cycle Modifier C Key #2 Vend Price SP1 24...
68
How to Program Special Vend 1 Cycle Modifier B Key #1 Options SP1 25.... 68
How to Program Special Vend 1 Cycle Modifier C Key #2 Options SP1 26.... 68
How to Program Special Vend 1 Extract Speed Limit SP1 27........................ 68
Special Vend 2 Days Enable SP2.................................................................... 68
Special Vend 3 Days Enable SP3.................................................................... 68
Special Vend 4 Days Enable SP4.................................................................... 69
Cycle Modifier Programming CNP-................................................................69
How to Program Default Cycle Modifier CNP 1...........................................69
How to Program Cycle Modifier B Key #1 Options CNP 2........................... 69
How to Program Cycle Modifier C Key #2 Options CNP 3........................... 71
How to Program Cycle Modifier B Additional Wash Time CNP 4..................72
How to Program Cycle Modifier B Additional Rinse Time CNP 5................. 72
How to Program Cycle Modifier C Additional Wash Time CNP 6..................72
How to Program Cycle Modifier C Additional Rinse Time CNP 7................. 73
How to Enter Cycle Programming CyCLE-..................................................... 73
Programming the Fill Step Type..................................................................75
Programming the Supply Step Type............................................................ 76
Programming the Agitate Step Type............................................................ 78
Programming the Soak Step Type............................................................... 80
Programming the Cooldown Step Type........................................................82
Programming the Drain Step Type.............................................................. 83
Programming the Extract Drain (Spin) Step Type......................................... 84
Programming the Audio Step Type..............................................................85
Programming the Hold Step Type............................................................... 86
Hold Step Custom Messages CNESS-.............................................................87
Programmable Cycle Time Display PCyCtd.................................................... 87
No Cycle Time Display nCyCtd..................................................................... 87
Number of Balance Attempts with No Loss of Time bAL At.............................87
Cycle Pause Resume CyCPAU....................................................................... 88
Low Power-Auto Shutdown 1 Days Enable LPAS 1......................................... 88
Low Power-Auto Shutdown 2 Days Enable LPAS 2......................................... 88
Low Power-Auto Shutdown 3 Days Enable LPAS 3......................................... 88
Low Power-Auto Shutdown 4 Days Enable LPAS 4......................................... 89
Power Fail Reset PF rst................................................................................. 89
How to Read Power Fail Reset Table...........................................................89
IR Access IrA En..........................................................................................89
Manual Rapid Advance rAPdEn.....................................................................90
Manual Diagnostics diAgEn.......................................................................... 90
Factory Test Ft En.........................................................................................90
Lucky Cycle LUC-........................................................................................90
Heating Indicator Decimal Point (Heater/Temp Sensor only) Ht dP................... 91
Temperature Display tP diS............................................................................91
Speed Units SUnitS.......................................................................................91
Programmable Close Door Display PCdL....................................................... 92
Programmable Push Start Display PPSt...........................................................92
Programmable Open Door Display PodL........................................................ 92
Vend Price Display Override AtS do............................................................... 92
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
7 Part No. 805405ENR5

OPL Parameters oPL-....................................................................................93
OPL Mode Enable oPL 1........................................................................... 93
OPL Delayed Start oPL 2...........................................................................93
OPL Display Power Save oPL 3................................................................. 93
Drop Off Mode droP..................................................................................... 94
Out of Order oUt...........................................................................................94
Collecting Audit Information................................................................ 95
How to Enter Audit Feature........................................................................... 95
Entering the Audit Feature by Manual Mode................................................... 95
Entering the Audit Feature with the Coin Vault Open....................................... 95
How to Read Audit Data................................................................................95
How to Exit Audit Feature............................................................................. 95
Manual Reset........................................................................................96
How to Enter Manual Reset........................................................................... 96
Testing Machine and Electronic Control Functions............................... 97
How to Enter Testing Feature.........................................................................97
How to Start Tests.........................................................................................97
How to Exit Testing Feature ..........................................................................97
Diagnostic (Testing) Mode – Quick Reference Chart........................................ 97
Diagnostic Test Descriptions..........................................................................99
Control Software Version Number Test d 1.................................................. 99
Drive Board #1 Software Version Test d 3..................................................100
Water Level Trim Test d 7........................................................................ 100
Service Door Opening Test d 8..................................................................100
Coin Vault Opening Test d 9..................................................................... 100
Coin Drop 1 Input Test d 10......................................................................100
Coin Drop 2 Input Test d 11......................................................................100
Vend Connection Header Present Test d 12................................................ 100
Start Pulse Test d 13.................................................................................100
Door Switch Input Test d 15..................................................................... 101
Door Lock Input Test d 16........................................................................101
Show Fill Time Test d 17..........................................................................101
Show Drain Time Test d 18...................................................................... 101
Temperature Sensor Display Test d 19....................................................... 101
Out of Balance Switch Test d 22............................................................... 101
External Outputs Test d 23........................................................................101
Water Purge Test d 24.............................................................................. 101
Water Leak Detection Test d 25.................................................................102
Water Level Test d 26.............................................................................. 102
DC Bus Voltage Test d 27.........................................................................102
AC Mains Voltage Test d 28..................................................................... 102
Configuration 1 Display Test d 29............................................................. 102
Configuration 2 Display Test d 30............................................................. 105
Configuration 3 Display Test d 31............................................................. 105
Configuration 4 Display Test d 32............................................................. 105
Configuration 5 Display Test d 33............................................................. 106
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
8 Part No. 805405ENR5

Factory Test................................................................................................106
To Enter Factory Test............................................................................... 106
To Exit Factory Test.................................................................................107
Factory Test Quick Reference Chart.......................................................... 107
Error Codes........................................................................................ 110
Rapid Advance Feature.......................................................................117
How to Enter Rapid Advance....................................................................... 117
How to Exit Rapid Advance Feature............................................................. 117
Clear Vend Feature............................................................................. 118
How to Clear Vend...................................................................................... 118
Power Fail Recovery........................................................................... 119
Communications Mode....................................................................... 120
Infra-red Communications........................................................................... 120
How to Begin Communications with an External Device.............................120
Card Reader Communications - Card Models Only........................................ 120
Network Communications............................................................................120
Default Cycle Time..............................................................................121
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
9 Part No. 805405ENR5

Model Identification
Information in this manual is applicable to these washer models:
BF3JGBJG403UN01 NF3JLBSP403NW22 PF3JGBJG403UG06
BF3JGBJG403UW01 NF3JLBSP403UN01 PF3JGBJP403UG06
BF3JGBJP403UN01 NF3JLBSP403UT01 PF3JGBSG403UG06
BF3JGBJP403UW01 NF3JLBSP403UT06 PF3JGBSP403UG06
BF3JGBSG403UN01 NF3JLBSP403UW01 PF3JXASG403UG06
BF3JGBSG403UW01 NF3JXASG403UN01 PF3JXASP403UG06
BF3JGBSP403UN01 NF3JXASG403UW01 PFNJXASG303UG06
BF3JGBSP403UW01 NF3JXASP403NW22 PFNJXASP303UG06
BF3JLBSG403UN01 NF3JXASP403UN01 PT2JGAJG403UG06
BF3JLBSG403UW01 NF3JXASP403UW01 PT2JGAJP403UG06
BF3JLBSP403UN01 NF3JXASP403UW06 PT2JGASG403UG06
BF3JLBSP403UW01 NF3JYASG403UW01 PT2JGASP403UG06
BF3JXASG403UN01 NT1JLASP413UW06 PT2JXASG403UG06
BF3JXASP403UN01 NT1JXASP403UW06 PT2JXASP403UG06
BF3JXASP403UW01 NT2JLASP403UN01 PT3JGAJG403UG06
BT3JGAJG403UW01 NT2JLASP403UW01 PT3JGAJP403UG06
BT3JGAJP403UN01 NT2JLASP403UW06 PT3JGASG403UG06
BT3JGAJP403UW01 NT2JXASP403UN01 PT3JGASP403UG06
BT3JGASG403UW01 NT2JXASP403UW06 PT3JXASG403UG06
BT3JGASP403UN01 NT3JLASG403UW01 PT3JXASP403UG06
BT3JGASP403UW01 NT3JLASP403NN22 PTEJXASG303UG06
BT3JLASG403UW01 NT3JLASP403NW22 PTEJXASP303UG06
BT3JLASP403UN01 NT3JLASP403UN01 PTGJXASG303UG06
BT3JLASP403UW01 NT3JLASP403UW01 PTGJXASP303UG06
BT3JXASG403UW01 NT3JXASG403UW01 SF3JXASP403EW06
BT3JXASP403UN01 NT3JXASP403NW22 ST1JXASP403EW06
BT3JXASP403UW01 NT3JXASP403UN01 ST2JXASP403EW06
NF3JGBSP403SW01 NT3JXASP403UW01 ST3JXASP403NW22
NF3JLBSG403UN01 NTHJXASP543NW01 TF3JXASP403NW22
NF3JLBSG403UT01 NTHJYASP543NW01 TT3JXASP403NW22
NF3JLBSG403UT06
NF3JLBSP403NN22
Model Identification
© Published by permission of the copyright owner -
DO NOT COPY or TRANSMIT
10 Part No. 805405ENR5