AllMounts PLB-43S User manual

INSTALLATION MANUAL
ISSUED: FEB.2013
7
Tilting Wall Mount
4. Adjustment
wall wall
3. Hanging the TV onto the Wall Plate
Hook the TV over the top of the wall plate. Tighten the safety screws on the display brackets with a proper
screw driver.
Important: Make sure the TV is correctly hooked and the safety locking screws are locked safely before
releasing the TV.
safety screw
200x200/300x300
400x200/400x400
600x400/800x400
800x600
PLB-43
70"
MAX
200x200/300x300
400x200/400x400
600x400/800x400
PLB-43L
70"
MAX
PLB-43S
70"
MAX
200x200/300x300
400x200/400x400
600x400
75kg75kg
(165lbs)(165lbs)
RATEDRATED
75kg
(165lbs)
RATED
Use the tilt adjusting knob to adjust your TV to the desired angle.
0°
-10°
Tilt adjusting
knob
Maintenance
• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your dealer if you have any questions.
CAU T ION: DO NOT EXCEED
RATED LISTED WEIGHT. SERIOUS
INJURY OR PROPERTY DAMAGE
MAY OCCUR!

2
Package M
Package W
ST6.3x55 (x6)
W-A
concrete anchor (x6)
W-B
D6 washer (x6)
W-C
1
M5x14 (x4)
M-A
M6x14 (x4)
M-B
washer (x4)
M-F
M8x20 (x4)
M-C
big spacer (x4)
M-H
M6x30 (x4)
M-D
M8x30 (x4)
M-E
small spacer (x8)
M-G
Component Checklist
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, telephone your local distributor for a replacement.
left adapter
bracket (x1)
B
wall plate (x1)
A
right adapter
bracket (x1)
C
NOTE: Read the entire instruction manual before you start installation and assembly.
WARNING
• Do not begin the installation until you have read and understood all the instructions
and warnings contained in this installation sheet. If you have any questions
regarding any of the instructions or warnings, please contact your local distributor.
• This mounting bracket was designed to be installed and utilised ONLY as
specified in this manual. Improper installation of this product may cause damage
or serious injury.
• This product should only be installed by someone with good mechanical ability
who has basic building experience and fully understands this manual.
• Make sure that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
• If mounting to wood wall studs, make sure that mounting screws are anchored
into the center of the studs. The use of a stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position
the equipment.
• Tighten screws firmly, but do not over tighten. Over tightening can cause damage
to the items, This greatly reduces their holding power.
• This product is intended for indoor use only. Using this product outdoors could
lead to product failure and personal injury.

600mm
(23.6")
Model
Stud 406mm
(16") 450mm (17.7") 610mm
(24")
PLB-43S
PLB-43
PLB-43L
4
3
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
1a. For Wood Stud Wall Mounting
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
WARNING
1b. For Solid Brick and Concrete Mounting
W-A
W-C W-A
W-C
W-B
ø 4.5mm
(ø 3/16")
55mm
(2.2")
55mm
(2.2")60mm
(2.4")
60mm
(2.4")
ø 10mm
(ø 3/8")
X
Screw the wall
plate onto
the wall
X X
√
12
Drill pilot holes
3
Find and mark the exact
location of mounting holes
X X
√
Screw the wall
plate onto
the wall
Drill pilot holes
1
2
Mark the exact
location of
mounting holes

65
2. Installing the Adapter Brackets 2-2 For Recessed Back Screens or to Access A/V Inputs
TV
TV
TV
TV
TV
TV
2-1 For Flat Back Screens
M-A
M-B
M-C
M-F
Tighten all screws but do not over tighten.
· Position the adapter brackets as close as possible to the center of the TV.
· Screw the adapter brackets onto the TV.
Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
or or or
M-C M-C
M-D
M-E
M-F
M-G
M-F
M-G
M-G
M-D
M-E
M-F
M-H
M-G
M-D
M-E
M-F
M-H
Top of the TV