Allnet ALL0235NANO User manual

ALL0235NANO
Wireless N 150Mbit
USB-Mini-Pen Adapter
Quick Installation Guide

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
1
-
1) Automatic Installation
Plug the ALL0235NANO into a free USB port on your PC or
laptop.
Open Network and Internet / Network and Sharing Center /
Manage network connections and check if the ALL0235NANO
will be installed automatically.(This may take up to 1 minute.)
If the ALL0235NANO stick appears you can search for wireless
networks around by open "Connect / Disconnect" with a right
click by mouse.

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
2
-
2) Installation with Dri er-CD
The following instructions show installation with Windows 7.
The procedure for Windows 8.1 / 8 / XP is mostly the same.
A.
Insert the Driver-CD into your CD drive and run
„Ralink_3x7x_5x7x_76xx_20140423.exe“
B.
Click on Install next.

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
3
-
C.
The next window show you the installations status bar.
When the Line goes full green the installation is done.
D.
After this installation, open Network and Internet / Network
and Sharing Center / Manage network connections.

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
4
-
E.
In addition to the LAN connection a new adapter is listed
called "Wireless Network Connection" or "Wifi adapter".
F.
Click on the "Wireless Network Connection" with a right click
and open "Connect / Disconnect".

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
5
-
G.
A list of available Wi-Fi networks will be shown. Click on your
home WLAN and enter the wireless password.
(1)
(2)
(3)

© ALLNET GmbH M nchen 2014 - Alle Rechte vorbehalten
-
6
-