Alloet TS-4000 User manual

TS-4000
Mulfuncon Thermostat
Timer Switch
User Manual
1st Version,April.11,2017

2
Contents
Introducon
Before first use
Safety notes
Proper use
Parts
Baeries
Set the clock and date
DST(Daylight saving me)
Program switch ON and OFF mes
Program countdown (CD)
Program random
Deacvate programs
Clearning and care
Disposal
03
03
04
06
06
08
09
10
10
12
13
17
20 How to switch Heat Mode/Cool Mode
21
23
24
25
26
27
27
MODE squence
Technical paramters
Trouble shoong
Program COOL mode
Program HEAT mode

3
Introducon
Congratulaons on the purchase of your new
Mul-funcon Thermostat Timer with big LCD
with backlight.
The product is designed to automacally turn
a connected electrical device on or offat de-
signated mes. Lights that should turn on and
off every day at the same me can be autom-
acally controlled by the digital weekly mer.
Before first use
Remove all liners and packaging materials and
check the device for damage. Clean the device as
described under Cleaning and care.
Follow all the below Safety notes while doing so.
Other devices can be acvated using the digital
weekly mer as well: for example your radio,
so that you wake up to your favorite staon or
show, or your aquarium lighng,TV,air condiner.
With twenty different switch on and off mes,
three different random modes and a countdown
mode,four different heat modes,four different cool
mode,this mulfuncon mer offers countless
other opons.

Safety notes
Before you use your digital mer switch,
please observe the following points:
1. Read the user manual thoroughly before use.
Follow all safety instrucons to prevent injury
due to incorrect use.
2. If you give the device to a third party you must
include this user manual.
3. No liability can be accepted for possible damages
due to unintended or incorrect use.
4. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilies, or by those with a lack of ex-
perience and knowledge, unless they have been
given supervision or instrucon concerning use of
the appliance by a person responsible for their
safety.
5. Children should be supervised to ensure that they
do not play with the appliance.
6. The device is not waterproof, do not place near
water or other liquids, or at locaons where water
or other liquids may gather. Keep a minimum dis-
tance of 5 m away from swimming pools and ponds.
7. Do not submerge the device in water.
8. Shield the device from moisture.
9. Do not expose the device to direct sunlight.
4

10. Do not use the device in the vicinity of heat-
producing devices such as ovens or stoves.
11. Do not use the device if it is damaged.
12. Never aempt to repair the device yourself.
Repairs may only be carried out by a qualified
professional.
13. Do not open the device.
14. Do not drop the device or subject it to any
mechanical load.
15. Follow all safety instrucons & instrucons of
all the devices you connect the product to.
16. For safety and licensing reasons (CE), it is not
permied to change or modify the device.
17. Never connect more than one mer device in
succession.
18. The integrated baeries may be replaced or
removed only by a professional.
This device is suitable exclusively for private
household use.
Danger of suffocaon! Keep all packaging
material away from children. Dispose of
the packaging materials in an appropriate way.
Contact your local authories about collecon
points or waste separaon.
5

Proper Use
This device is intended for the automac switching
on and off of other connected electrical devices.
The max rangs as below:
230VAC/16A/50Hz/3680W(EU)
110VAC/15A/60Hz/1800W(US)
250VAC/13A/50Hz/3250W(UK)
Parts
5
4
1
2
3
6
7
1
2
3
5
4
6
7
LCD display
RND/+ buon
CD/- buon
RESET buon
SET/MODE buon
ON/OFF buon
Plug/socket
RESET
SET/
MODE
RND/
+
CD/
-
ON/
OFF
6
ZONE PROG CLOCK SET CD L- RND HEAT COOL

A
B
C
D
F
G
I
H
L
M
N
O
P
Q
R
E
JK
S
T
ZONE PROG CLOCK SET CD L- RND HEAT COOL
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
Weekday
RCC symbol (Oponal)
Program deacvaon
ON/OFF status
Program number
Cool mode
Heat mode
Random mode
Long random mode
Targe temperature
7
Temperature rising symbol
Temperature symbol
Current Temperature
Countdown mode(CD)
Program symbol
Seng symbol
ZONE symbol(Oponal)
Clock/Time
AM/PM
Summer me symbol
K.
L.
M.
N.
O.
P.
Q.
R.
S.
T.

Baeries
• Only use baeries of the best quality. Low-grade
baeries could leak, causing damage to the device.
• Do not dispose of baeries with your household
waste! Please dispose of baeries in an environ-
mentally friendly way and in accordance with
current legislaon.
• Do not recharge baeries or aempt to reacvate
them in any other way, do not take baeries apart,
throw them in fire or short-circuit baeries.
• Do not use old and new baeries or baeries of
different types simultaneously.
• Before disposing of the device, remove the baeries.
Reset
Push the RESET buon to simultaneously delete
all programs and sengs,back to factory default
sengs.
8

1. Set the weekday using RND/+ or CD/-
2. Push SET/MODE buon
3. Set the 12Hr/24Hr using RND/+ or CD/-
4. Push SET/MODE buon
5. Set the hours using RND/+ or CD/-
6. Push SET/MODE buon
7. Set the minutes using RND/+ or CD/-
8. Push SET/MODE buon,second restart to Zero.
9. Set the °C/ °F using RND/+ or CD/-
10. Push SET/MODE buon, back to clock mode.
For examples, we set 10:40:00AM,Thursday,
Temperature symbol is °C as below:
Set the Clock and Date
In clock mode,Push SET/MODE buon for 3 seconds,
go to clock and date seng mode.
Mark:
During me seng, if no
operaon for 30 seconds
The thermso mer switches
automacally back to clock
mode display.
9
• If you choose 12Hr,AM/PM will display.
• If you choose °F, the temperature will diplay in °F

• While in me mode, push and hold the RND/+
and CD/- at the same me,daylight saving me
symbol( ) appears on the display. The me of day
is automacally set forward an hour.
• Repeat this step to reset to the normal me, the
daylight saving me symbol( )disappears from
the display.
Push and hold the SET/MODE buon and push
the RND/+ buon (3) repeatedly. Push and hold to
toggle through more quickly. The sequence of
modes is shown:
Time mode: CLOCK
Switching program mode:
PROG 1 ON - PROG 1 OFF
PROG 2 ON - PROG 2 OFF and so on unl ...
PROG 20 ON - PROG 20 OFF
PROG Random: PROG 21 ON- PROG 21 OFF
Countdown mode: CD
HEAT mode:
HEAT H1 ON OFF
HEAT H2 ON - HEAT H2 OFF
HEAT H3 ON - HEAT H3 OFF
HEAT H4 ON - HEAT H4 OFF
DST (Daylight Saving Time)
Mode Sequence
10

11
COOL mode:
COOL C1 ON OFF
COOL C2 ON - COOL C2 OFF
COOL C3 ON - COOL C3 OFF
COOL C4 ON - COOL C4 OFF
To show the sequence of modes in reverse order,
push and hold the SET/MODE buon and push the
CD/- buon repeatedly or push and hold to
toggle through more quickly.

Program switch ON and OFF mes
The mulfucnons mer switch‘s 20 programmable
switching programs are subdivided in:
ON: for switch-on
OFF: for switch-off programs.
1. In clock mode, push and hold the SET/MODE buon
and push the RND/+ buon repeatedly.
The display shows the symbols PROG and ON as
well as the switching program number 1.
2. Push the SET/MODE buon for approx. 3 seconds
unl the LCD display shows SET next to PROG
and the weekday MO blinks.
3. Set the weekday using RND/+ or CD/- , there are
following selecon, which the switching program is
acvated:
MO = Monday
TU = Tuesday
WE = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
MO, TU, WE, TH, FR (Monday to Friday)
MO, TU, WE, TH, FR, SA (Monday to Saturday)
SA + SU (Saturday and Sunday)
MO, TU, WE, TH, FR, SA, SU (Monday to Saturday)
CD
OFF
ON
MONTH DAY YEAR
12

4. Push the SET/MODE buon.The hour blinks.
5. Set the hour using RND/+ or CD/-.Push and hold
either buon to toggle through more quickly.
6. Push the SET/MODE buon.The minute blinks.
7. Set the minute using RND/+ or CD/-. Push and hold
either buon to toggle through more quickly.
8. Push the SET/MODE buon.The second blinks.
9. Set the second using RND/+ or CD/-.Push and hold
either buon to toggle through more quickly.
10. Push the SET/MODE buon.
11. Switching program 1(PROG 1 ON) is set.
It will automacally back to program switch mode.
12. Push and hold the SET/MODE buon and push
the RND/+ buon repeatedly. The display shows
the symbols PROG and OFF as well as the
switching program number 1.
10. Program the switch-off me by above same steps
for seng the switch-on me.
11. If required, set all 20 programs in the same way.
For examples, we set as below:
PROG 1 ON,MO-SA,14:48:35
PROG 1 OFF,MO-SA,18:22:57
13

14
Program Heat Mode
This mer can be used to control heaters.
It contains 4 programs, which devided into 1 basic
program and 3 addonal programs when you want
to set different TARGET temperature in differnt me
rang.
In clock mode,push and hold SET/MODE ,and push
RND/+ or CD/- repeatedly .Push and hold to toggle
through more quickly. Switch to H1 ON OFF mode.
1. Push SET/MODE for 3second, SET, HEAT and PROG
symbol will appear in display.
2. Target temperature blinks, using RND/+ or CD/-
to set the basic temperature for whole day.
Marks:
1. Defualt TARGET temperature is 25°C.
2. Current temperature update every 10 seconds.
3. In H1 programs, only need to set target temperature
it means,this mer switch will control heater.
to mainan room temperture in preset temperature
for whole day.
4. Aer you set the target temperature, if you want to
cancel, you can reset the temperature and set as
“NO”,it means, this program is deacvated.
5. If you don’t need to set different target temperature
Please go to Page.17

15
You can set different TARGET temperature in different
me range.
In clock mode,push and hold SET/MODE ,and push
RND/+ or CD/- repeatedly. Push and hold to toggle
through more quickly. Switch to H2 ON programs:
1. Push and hold SET/MODE for 3 seconds.
2. Target temperature will blink,using RND/+ or
CD/- to set different temperature.
4. Push SET/MODE
5. Weekday will flash,using RND/+ or CD/- to
set the weekday.
3. Push SET/MODE
4. Hours will flash,using RND/+ or CD/- to set the hour.
5. Push SET/MODE
6. Minutes will flash,using RND/+ or CD/- to
set the minutes.
7. Push SET/MODE
8. Seconds will flash, using RND/+ or CD/- to
set the seconds.
9. Push SET/MODE
10. Go to H2 OFF programs,weekday will flash,
using RND/+ or CD/- to set the weekday.
(if you change weekday,H2 ON will also be changed )
11. Push SET/MODE
12. Hours start to flash,using RND/+ or CD/- to
set the hour.
13. Push SET/MODE

16
14. Minutes start to flash,using RND/+ or CD/- to
set the minutes.
15. Push SET/MODE
16. Seconds start to flash,using RND/+ or CD/- to
set the seconds
17. Push SET/MODE,back to programs switch mode.
For example,
set H1 ON OFF, H2 ON,H2 OFF as below:
H1 ON OFF:
Target Temp.=26°C
H 2 ON,H2 OFF:
Monday to Sunday, 18:00:00~23:36:00,Target Temp.=32°C
This means, from Monday to Sunday, 18:00~23:36, keep
the room temperature in 32°C, the rest me keep in 26°C.
You can set H3 ON/H3 OFF,H4 ON/H4 OFF in same way
to program other different target temperature.
PROG HEAT
PROG HEAT PROG
SET HEAT

17
Program Cool Mode
This thermostat mer can be used to control cooling
devices. It contains 4 programs,which devided into
1 basic program and 3 different programs to set
the different TARGET temperature with different me.
In clock mode,push and hold SET/MODE ,and push
RND/+ or CD/- repeatedly. Push and hold to toggle
through more quickly. Switch to C1 ON OFF mode.
1. Push SET/MODE for 3 seconds, SET, COOL and
PROG symbol will appear in display.
2. Target temperature blinks, using RND/+ or CD/-
to set the basic temperature for whole day.
Marks:
1. Defualt TARGET temperature is 25°C
2. Current temperature update every 10 seconds
3. In C1 ON OFF programs, only need to set target
temperature, it means,this mer will control
cooling devices to mainan room temperture in
preset temperature for whole day.
4. If you don’t need to set different target temperature
Please go to Page 20.

18
You can also set different target temperature in
different me range.
In clock mode,push and hold SET/MODE ,and push
RND/+ or CD/- repeatedly. Push and hold to toggle
through more quickly. Switch to C2 ON programs,
1. Push and hold SET/MODE for 3 seconds.
2. Target temperature will blink.
Using RND/+ or CD/- to set the different temperature
4. Push SET/MODE
5. Weekday will flash,using RND/+ or CD/- to
set the weekday.
3. Push SET/MODE
4. Hours start to flash,using RND/+ or CD/- to
set the hour.
5. Push SET/MODE
6. Minutes start to flash,using RND/+ or CD/- to
set the minutes
7. Push SET/MODE
8. Seconds start to flash,using RND/+ or CD/- to
set the seconds
9. Push SET/MODE
10. Automacally go to C2 OFF programs,weekday
will flash,using RND/+ or CD/- to set the weekday.
(if you change weekday,C2 ON will also be changed )
11. Press SET/MODE
12. Hours start to flash,using RND/+ or CD/- to
set the hour.
13. Press SET/MODE

19
14. Minutes start to flash,using RND/+ or CD/- to
set the minutes.
15. Press SET/MODE
16. Seconds start to flash,using RND/+ or CD/- to
set the seconds
17. Press SET/MODE,back to programs switch mode.
For example,
we set C1 ON OFF, C2 ON/C2 OFF as below:
C1 ON OFF:
Target Temp.=18°C
C 2 ON,C2 OFF:
Monday to Sunday, 20:00:00~23:45:00,Target Temp.=22°C
This means, from Monday to Sunday, 18:00~23:45, keep
the room temperature in 22°C, the rest me keep in 18°C.
You can set C3 ON/C3 OFF,C4 ON/C4 OFF in same way
to program other different target temperature.
PROG COOL
ZONE PROG COOL PROG COOL

HEAT Mode:
1. When CURRENT< TARGET, it will be in ON status,
turn on connected heaters, symbol blinks,it means
current temperature is rising to TARGET.
2. When CURRENT=TARGET, it will be in OFF status,turn
off connected heaters.
3. The current temperature will be decreasing,
when temperature decreased 1°C, it will turn ON
heaters once again, then infinite loop.
COOL Mode:
1. When CURRENT> TARGET, it will be in ON status,
turn on connected cooling devices, symbol blinks,
it means current temperature is decreasing to TARGET.
2. When CURRENT=TARGET, it will be in OFF status,turn
off connected cooling devices.
3. The current temperature will be increasing,
when temperature increased 1°C, it will turn ON
connected cooling devices once again, then infinite
loop. 20
In clock status,
1. Push SET/MODE,acvate HEAT mode.
HEAT symbol blinks, symbol shows in display.
2. Push SET/MODE again,acvate COOL mode.
COOL symbol blinks, symbol shows in display.
3. Push SET/MODE again,back to clock status.
How to switch Heat Mode/Cool Mode