Alpatronix VX100 User manual

Help us in our charitable endeavors!
Alpatronix donates $1 to charity for every review you
leave for our products. We don’t care if it’s positive or
negative, we just think every business needs to do some
good in the world. Help us make the world a better
place AND help us and your fellow customers by
giving us your valuable feedback.
Thank you for being a contributing citizen of this world.
Alpatronix is the registered trademark of SaritekTechnical Solutions, Inc.
All other brands are registered trademarks of their respective owners.
User Manual for
VX100 Cooling Facial Interface
for Meta Quest 2
ready to replace when needed. Visit www.alpatronix.
com/products/virtual-reality for more information.
5. Always return to freezer or refrigerator promptly for
faster reuse.
6. Caution: Do not place in microwave or heat in any
other way. This product is not intended to be heated.
7. Individuals with problems in sensing cold should use
extreme caution with this product.
8. Watch for frostbite. In case of any discomfort,
discontinue use for a few minutes and allow the
cushion temperature to rise before reapplying.
Alternatively, you may place a paper towel between
the cushion and your skin.
9. Do not lie on top of cushion or put excessive weight
on it, as it could cause it to break. Check for leaks
before use. Throw away if tears or leaking is detected.
10. For external use only.
11. Adult supervision is recommended when using on
children.
12. This is not a medical or therapeutic device. Do not use
this product as a therapeutic cold pack.
13. DO NOT OPEN THIS PACK. Check for tears or leaks
before use. Throw away if leaking.
14. SUGGESTED FIRST AID: If contents contact skin or
eyes, remove pack immediately. Thoroughly ush
with water. If swallowed, do not induce vomiting. Call
a doctor or poison control center immediately.
281286-VX100 User Manual.indd 1281286-VX100 User Manual.indd 1 3/24/2023 3:40:49 PM3/24/2023 3:40:49 PM

Important:
Consumer Safety Notications
When using electronic devices, basic safety precautions
should be followed, including but not limited to the
following. Understand that this product is designed to work
with other devices, each of which have their own safety
considerations. Keep all safety considerations in mind when
operating this or any other device by itself, or in combination
with one another. You are responsible to ensure using all
devices within their safe operational parameters. By using
this product, you consent to indemnify and hold harmless
Alpatronix and all its agents regarding the use of this
product.
1. Read all instructions before using.
2. Do not expose any electronic devices to water, moisture,
steam, excessive sweat, or any other liquids.
3. This product is not intended for use by persons (including
children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless
they are closely supervised and instructed about use of
the product by a person responsible for their safety. Close
supervision is necessary when any electronic device is
used by or near children. Children should be supervised
to ensure that they do not play with this device in a
harmful way.
4. For optimum performance, leave in place for no more
than 20-30 minutes. Remove and return to freezer
or refrigerator for at least 30 minutes before reusing.
SUGGESTION: You may purchase additional cushions to
keep in the freezer or refrigerator, so you always have one
Parts
Quick Setup Guide
1. Place your cushions in the freezer or refrigerator for
about 30 minutes, or until the desired cool temperature
is reached. You may purchase additional cushions, so you
always have one handy when needed.
2. Remove the original facial interface from your Meta Quest
2 by pulling it o the VR goggles.
3. Install the VX100 frame on your Meta Quest 2 Virtual
Reality goggles.
Note: If you wear eyeglasses, you may use the original eyeglass adapter that
came with your Meta Quest 2 before installing the Frame. The Alpatronix frame
works with eyeglass adapter of your Meta Quest 2.
4. Install a cold cushion on the frame.
Hint: To ensure maximum eld of view, ensure that the cushion is installed clear
of your eld of view.
5. Each cushion can last up to 20-30 minutes, depending
on the starting temperature. Once the cushion no longer
provides cold comfort, simply replace it with another one
from the freezer or refrigerator.
Warranty
To activate the 6-month warranty on your product, visit
https://www.alpatronix.com/warranty and click on the
warranty link. Alpatronix warranty will fully cover your
purchase against all defects in material and workmanship
for the entire 6-month period. Most return policies
only allow returns for a period of 14 – 30 days from
date of purchase, and most problems have a knack of
happening AFTER that period ends. So, hurry and register
your product to give yourself peace of mind knowing
Alpatronix has got you covered for a whole 6-month
period.
In case of any problems or need for support, do not
hesitate to contact us at:
PO Box 68030, Anaheim, CA 92618
[phone]
[email protected]
www.alpatronix.com/warranty
100%
Satisfaction
Guaranteed
1. Frame 2. Cushion
281286-VX100 User Manual.indd 2281286-VX100 User Manual.indd 2 3/24/2023 3:40:51 PM3/24/2023 3:40:51 PM