Alpha Skybuds User manual

USER MANUAL

WELCOME
Congratulations on your new Skybuds.
This user manual will help you
learn the basics.

Skybuds Basics
Skydock Basics
Skydock Battery Indicator
Getting Started
Wearing & Pairing
The App
Button Control Summary
Advanced Button Control
Troubleshooting & FAQs
Help & Resources
5
6
7
8
10
14
20
21
22
24
CONTENTS

LISTEN
to all audio with
premium sound
TALK
using a digital
microphone for calls
GO
with 24 hours additional
play time per charge

5
Charging
Contact
Points
SKYBUDS BASICS
Microphone
Button
Press and hold button for
3 seconds to power on and o
See pages 20-21 for button
commands
LED Status
Light
Interchangeable
Fit Tips

6
SKYDOCK BASICS
Button
Press button on top of Skydock
to see Skybuds and Skydock
battery status
Sliding Cover
LED Status Light
Micro USB Port

7
SKYDOCK BATTERY INDICATOR
If Skydock shows 3 red LED lights, this indicates the battery is low and needs to be recharged. If
no LED lights turn on after plugging in the Skydock, Please contact us at [e-mail]
Pulsing blue:
charging
1 Solid blue LED:
0-33% charged
2 Solid blue LEDs:
34-66% charged
3 Solid blue LEDs:
67-100% charged
Solid blue:
fully charged
Pulsing blue:
charging
Skybud 2Skybud 1
Skydock Battery Indicator
Skybuds Battery Indicator
Button
Press button to
illuminate battery
life LEDs lights

GETTING STARTED
STEP 1
Push up on the bottom of the Skydock
to open it and insert the Skybuds into
the Skydock as illustrated above.
8

GETTING STARTED
STEP 3
Charge Skybuds
and Skydock.
STEP 2
Close sliding cover.
9

WEARING
& PAIRING

WEARING
11
STEP 1
Remove Skybuds from the package and place in
your ears as shown below. Try all the enclosed fit
tips. We recommend wearing the largest fit tips
possible for the best fit and highest audio quality.
Button faces out Tip faces down Twist downward and
lock in place

PAIRING: INITIAL SETUP
STEP 2
A. Press and hold the button on each Skybud
for 3 seconds. You will hear both Skybuds
power up.
B. Listen to the entire audio setup instructions
to get started.
C. Once the audio setup instructions finish
rapidly press the right bud 3x to put
Skybuds into pairing mode.
STEP 3
A. Go to the settings menu on your phone or
device and turn on Bluetooth.
B. Once you’ve accessed Bluetooth Settings,
you’ll see one Skybud ready to pair. Please
pair this Skybud to your device.
C. You’ll hear “you’re now online” in the voice
prompts. Now you’re ready to listen to
music and make phone calls.
D. To set up advanced features, please
download the Skybuds app on your
phone.
12
3 Sec.3 Sec.

PAIRING: EVERYDAY USAGE
STEP 3
A. Press the button on either Skybud 3x.
B. Your Skybuds are now in pairing mode
and you will hear a sound in both earbuds
confirming this step.
C. You will hear an audio confirmation once
your Skybuds have successfully been paired
and are ready to use.
13
Press 3X

CONNECTING THE SKYBUDS APP
STEP 1
Download the app from the Apple
App Store or Google Play Store.
STEP 2
Open the Skybuds app and follow
the on screen instruction to
complete the setup process and
pair Skybuds to the app.
To your Skybuds and Skydock
14
The Skybuds app lets you take further
control of your Skybuds with even more
features.
To stream music, make phone calls and
more, make sure you pair your Skybuds
with your device via the Bluetooth
settings.

15
Active
Active Awareness will let you hear
the outside world around you while
streaming audio including music,
podcasts and more.
Slider
The slider gives you the control to
adjust how much or how little of the
outside world you let in while using
Active or Adaptive Awareness.
Adaptive
Adaptive Awareness gives you the best
of both worlds, letting you tune out the
world while listening to audio and tune
it back in when you press pause on your
Skybuds or device.
AWARENESS
Awareness gives you control
over the world around you.
Choose between two settings:
Active and Adaptive.
All Awareness features will turn
o when you put your Skybuds
in the Skydock.
If a call comes in, Awareness
will turn o while you’re talking
on the phone and turn back on
when your call ends.

16
Radar
Use the radar range settings:
close, near, far, and very far to
locate nearby missing Skybuds
and/or Skydock. The radar
settings are based o the
proximity of the missing Skybud/
Skydock in relation to your device.
Calibration
For accuracy, you’ll need to
calibrate your device and
Skybuds/Skydock before initially
using the Proximity finder. Follow
the instructions on screen to
calibrate Skybuds and Skydock.
Proximity
Proximity finder can help you track
down nearby misplaced Skybuds
and Skydock by using a close, near,
far and very far range. Prior to using
proximity, you need to calibrate your
Skybuds by following the on screen
instructions.
Devices
Use the buttons to select which part
of your Skybuds you’re trying to
locate. Choose between Left Skybud,
Right Skybud, and Skydock.
FIND MY SKYBUDS - PROXIMITY
*To use Find My Skybuds features, you must have the Skybuds
app open in the foreground or background of your device.
*Device location is approximate and may not always be accurate.

17
Pin
The pin will show you on a map
the last known location of your
Skybuds when they went out of
Bluetooth range.
Refresh
Refresh will recenter the map after
moving it’s positioning around.
Note: this will not change the
location of the pin.
Location
Location will help you identify
the last known location where
Skybuds and/or Skydock went out
of Bluetooth range from your paired
device.
Devices
Use the buttons to select which part
of your Skybuds you’re trying to
locate. Choose between Left Skybud,
Right Skybud, and Skydock.
FIND MY SKYBUDS - LOCATION
*To use Find My Skybuds features, you must have the Skybuds
app open in the foreground or background of your device.
*Device location is approximate and may not always be accurate.

18
FIND MY SKYBUDS - NOTIFICATIONS
When your Skybuds and/or Skydock go out of
Bluetooth range from your paired device, you will
receive a push notification to alert you. In order to use
this feature, you must have the Skybuds app open and
have accepted push notifications on your device.
*To use Find My Skybuds features, you must have the Skybuds
app open in the foreground or background of your device.
*Device location is approximate and may not always be accurate.

19
Reset Password
Forgot your password? No
problem. You can reset your
password simply by clicking the
forgot password link.
Profile
Setup your Skybuds account by
filing in all requested information
to receive a more personalized
Skybuds experience.
ACCOUNT
We’re always adding more
features and upgrades to
Skybuds.
Accounts are used to
customize your experience
with Skybuds. Plus you’ll be
the first to know when new
features are released.

20
SKYBUDS BUTTON CONTROL
SUMMARY
Press button 1x to
answer call / end call
Press Button 1x to
play / pause
Press Button 3x to
skip to start or previous
track (only during playback)
Press Button 2x to
skip a track
Press Button 3x to
enter pairing mode
Hold Button 3 sec.
to power on / o
Skybuds automatically turn on
when removed from the Skydock
and o when returned to the
Skydock to charge.
Skybuds must have firmware version 1.3.0 or above
Skybuds must have firmware version 2.0.0 or above
Hold 1 sec.
to activate Siri/OK Google
Hold 1 sec.
to turn Awareness on /o
LEFT bud only
RIGHT bud only
2
1
1
2