Alphason FW750 User manual

01 06/08
issue
ASSEMBLY INSTRUCTIONS
Alphason Designs Limited
Alphason House, Bolton Road, Atherton, Greater Manchester M46 9AW UK
Tel: [phone]
Fax: [phone]
[email protected]
www.alphasondesigns.com
Alphason Designs Ltd. accepts no liability for any damage caused through incorrect or inappropriate use of this audio visual support.
Please Note:
Total maximum load for this support must not exceed 120Kg
This support must be assembled in accordance with these assembly instructions.
Maximum load for top panel is 80Kg. Maximum load for each glass shelf is 50kg.
MODEL: FW750
AV SUPPORT
IMPORTANT INFORMATION!
1) Before starting assembly please take time to familiarise yourself with the instructions and the
components listed on the back page, as this product could be unstable if incorrectly installed.
2) Do not place hot or cold items against or in close proximity to any glass surface unless an
adequately thick insulating material is used to prevent such items coming into contact with the glass.
3) Do not strike the glass with hard or pointed items.
4) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if necessary;
do not use washing powders or other substances containing abrasives as these may scratch the glass.
5) Do not sit or stand upon horizontal glass surfaces.
6) In order to maintain a high quality finish, when cleaning wooden panels please use a soft cloth with a
suitable furniture polish if required.
7) Alphason Designs uses real wood veneers, consequently slight colour and pattern variation may occur and
does not indicate a product defect. With natural wood, exposure to direct sunlight can produce colour
change and should be avoided. Any slight change in colour over time does not indicate a product defect.
Finewoods
SERIES

Insert levelling feet in the base of left side
panel and right side panel .
STAGE 1
•
STAGE 2
•
D
01 06/08
issue
C
STAGE 3
Attach shelf frames and to right side
panel using screws .
Ensure all screws are tightened using allen
key .
3.3.
•
A
•
•
2.2. Attach top shelf frame to left side
panel using screws .
Please note top shelf frame has extra bar
across the centre.
Attach shelf frames to left side panel
using screws at the desired
heights.
Ensure holes in shelf frames are at the
back for the back panel to fit at stage 3.
STAGE 4
•
•
4.
W
1.1.
H
B
C
D
D
A
I
A
I
A
I
•
B
C
D
B
I
H
x4
I
x6
I
x6
x2
J
x4
K
Attach back panel using screws and and
dome nuts .
Ensure you slot back panel into side panel grooves
at both sides.
Ensure you locate the shorter screws through top
framework and longer screws through the
bottom framework , secure all screws using dome
nuts .
G
J
K
G
K
G
J
C
D
•
L
L
K
J
L
x2
L
M
•
C
D
D
I

Fix top shelf buffers to top shelf frame .
Please space the buffers equally around the frames
and ensure all top shelf buffers are used.
Fix shelf buffers to shelf frames . Please
space the buffers equally around the frames
STAGE 5
•
STAGE 6
01 06/08
issue
Congratulations your stand is now complete.
•
•
•
6.6.
Carefully place top glass shelf onto
top shelf frame .
Carefully place glass shelves on to
shelf frames .
Ensure all glass shelves are resting on
buffers and .
5.5.
C
D
E
F
F
E
C
F
D
x12
N
•
N
O
N
O
x12
N
O
C
D
D
O
O

DESCRIPTION QTY PACKED BY
1
1
2
COMPONENT
MODEL: FW750
CERTIFICATE OF CONFORMITY
01 06/08
issue
A
B
2
2
1
GLASS SHELVES
SHELF FRAMES
TOP SHELF FRAME
(LARGER FRONT AND BACK SECTION)
RIGHT SIDE PANEL
LEFT SIDE PANEL
BACK PANEL 1
M4 X 18 SCREW
SPANNER AND ALLEN KEY
C
D
E
F
G
12
M6 X 33 SCREW
LEVELLING FOOT 4
H
I
J
K
1
TOP GLASS SHELF 1
L
SHELF BUFFERS
12
4
DOME NUT
M
N
TOP SHELF BUFFERS
12
2
M4 X 24 SCREW
O