Alpine LED2120T User manual

LED2120T
Super Bright Warm White LED Pond
Light
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion within the warranty period. A valid proof of
purchase with the purchase date clearly indicated must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage, is considered
negligence and will not be covered under this warranty. The use of “hard water” and/or
caustic cleaners can affect the painted or other finishes. Failure to keep the unit clean and
use of such additives/cleaners will also void the warranty. Please note: for fountains, it is
normal for some splashing to occur and protecting the immediate surfaces is not the
responsibility of Alpine Corporation
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed protect the entire finish against breakdown of
color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading within the first year from date of
purchase with the above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that not an option, you can contact Alpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to
show proof of purchase, provide photographs and any other information needed to
validate your claim. This may be necessary to distinguish between a partial or complete
replacement of a defective product. The warranty does not cover any items with multiple
parts; the warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim

Product Name
Super Bright Warm White LED Pond Light
Model #
LED2120T
Rated Voltage
INPUT: AC 120V OUTPUT: AC 12V
Consumption Power
8.4 Watts
Dimension
6"D x 7"H
Cable Length
23ft
Parts:
LED2120T light
Garden Stake
Weighted Base
Transformer
Photocell
Assembly: Please refer to the diagram below.
Step 1: Connect the LED2120T male connector pin into
the female connector on the photocell. Turn the
watertight cap clockwise until tight.
Step 2: Connect the photocell male connector pin into the
female connector of the transformer. Turn the watertight
cap clockwise until tight.
Step 3: Place the light in your pond, water feature or
attach the garden stake and place in your garden in the
direction you would like to illuminate.
Step 4: Plug the transformer into a standard 110 Volt
outlet and enjoy your new light!
MAIN FEATURES
Alpine Corporation is proud to introduce our New LED Garden Lighting.
These innovative lights will add character, class and ambiance to your
pond, garden and water feature.
●Super bright LED lights, that offers low energy consumption, for
an environmentally friendly solution to standard lighting.
Waterproof design can be used in or out of water.
Sleek design housing with Adjustable Head and Garden Stake
Photocell to automatically turn light on at dusk and turn off at
dawn.
Low voltage design for safe handling and lower energy costs.
Caution:
(1) If used with a different transformer than what is included please make
sure it has the proper voltage rating.
(2) The transformer can get hot! Please be sure not to cover and is in a
location were it can receive sufficient air circulation.
Useful information:
Need more lighting to add to your landscape? Please contact your local
Alpine distributor.
1. You can also use this product with Alpine Color changing LED Lights.
Add color to any landscape with Super Bright LED Changing Pond
Lights. The part numbers are LED572T, LED460TSL, PL124T and
the most powerful on the market are Mega Bright 144 LED Light with
Color changing and Super Bright White Light part number LED6144T.
Items not included.
2. Attach either 5 or 10 lights to a single transformer system with Alpine
Garden Light Cable. Available in 25 foot with 5 outlet connectors or
50 foot with 10 outlet connectors. Garden Light Cables are part
numbers PL325 and PL350 and are not included.
3. Power all your Garden and Landscaping needs with just one
transformer. Alpine can meet all your needs and Alpine distributors
carry transformers ranging from 60 Watt all the way up to 300 Watt for
even your biggest landscape projects! Contact a local distributor
today and ask for more great products from Alpine Corporation!