Alpine HET104 User manual

HET104
Water Bubble Fountain w/
LED Lights and Wine Rack
with Remote
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of
purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage and is considered
negligence and will, therefore not be covered under this warranty. The use of “hard water”
and/or caustic cleaners can affect the paint or other finishes. Failure to keep the unit clean,
and use of such additives/cleaners, will also void the warranty. Please note: for fountains,
it is normal for some splashing to occur and protecting the immediate surfaces is not the
responsibility of Alpine Corporation
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed to protect the entire finish against breakdown
of color. As with any product, all finishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading within the first year from date of
purchase with the above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that is not an option, you can contact Alpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to
show proof of purchase, provide photographs and any other information needed to
validate your claim. This may be necessary to distinguish between a partial or complete
replacement of a defective product. The warranty does not cover any items with multiple
parts; the warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department. Item is covered under one year limited warranty from the date of
purchase. When requesting replacement parts due to a warranty claim after 30 days of
purchase, credit card information will be requested for shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Damages caused in Transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim

Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have been
removed from the packaging.
Components:
Fountain
Top Piece
Base Cover
Stones
Power Cord
Wireless Remote
Assembling:
Place the fountain on a smooth and level surface.
Remove top piece from fountain and fill all the columns evenly to the
water level line from the top of the fountain. Place top piece back over
the top of the fountain. (Figure 1)
Feed the power cord through the hole on the side of the base and
connect the power cord to the transformer and the air pump. (Figure 2)
Place the Base cover over the base of the fountain and place the stones
on top of the base cover for decoration. (Figure 3)
Plug the power cord into your local power supply. Make sure that there
is no water around the plug and always keep the power source in a dry
place.
*This item also comes with a wireless remote control to control the lights and a foot
switch which is located on the power cord for a quick on and off switch.
If you have any questions and/or problems, please contact the retail store you
purchased this fountain.
Features of Fountain
Use the air adjustors on the base under each column to adjust the air volume
Top plastic piece is for hanging glasses
The three circle plastic pieces are for holding bottles
Includes wireless controller for LED lights
Includes a foot switch located on the power cord for easy on and off capability
Troubleshooting
If you LED lights stop working
Check the black ballast inside of the base of the fountain to see if the
green light is on. If the green light is out you will need to replace the
ballast (Alpine Item# RRR128). To replace the ballast disconnect
from the power cord and also disconnect from the white light adaptor
box and then remove.
If the green light is still on you will need to replace the white light
adaptor box (Alpine Item# RRR130). To replace unplug the black
cord from the ballast and then unplug both multi-color cords and
replace.
If the bubbles stop working
You will need to replace the air pump (Alpine Item# RPC118). To
replace the air pump disconnect the power cord and disconnect the
tubing from the first connectors and replace.
Caution
oAlways unplug the pump from the electrical outlet before cleaning & handling
oUses with clean water only and periodically
oPeriodically change water & clean the pump to keep free from micro-organisms
oDisconnect and drain and store the unit in a dry place if not in use for an extended
period of time
oDo not operate with water above 90°F or 30°C
oDo not lift, carry or pull the fountain by the power cord
oDo not exceed the maximum voltage & wattage on transformer
1
2
3
Air Adjustors