Alpine MAZ254-UK User manual

Owner’s Manual
Ques ons?
Please See Contact Details on the Back!
Hanging 6-Cup Tiered
Floor Fountain
v7.0
USA Item No: MAZ254
UK Item No.: MAZ254-UK

1
CONTENTS
Contents ...................................................................... 1
What’s Included ........................................................... 2
Features ...................................................................... 3
Specications .............................................................. 3
Assembling & Using Your Product............................... 4
Replacement Parts...................................................... 8
Troubleshooting........................................................... 9
Caution ...................................................................... 10
Limited Warranty Information .....................................11
Notes ......................................................................... 12

2
WHAT’S INCLUDED
Fountain Cups
x1
Fountain Top
x1
Splash Guards
x6
Fountain Basin
x1
*Pump may be packaged separately in an outer box located in the
outer Styrofoam packaging.
Fountain Pump
x1

FEATURES
3
FEATURES
Durable metal
construction
Soothing
meditative and
relaxing water
sound
Beautiful bronze
nish
SPECIFICATIONS
Country Power
Requirement
Water
Capacity
Tubing Inner
Diameter
USA 120 V, 60 Hz 0.5 gal 0.16"
UK 230V, 50 Hz 2 L 4.06 mm

4
ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully. Check the packaging to ensure all of
the parts have been removed.
*Some splashing may occur when the fountain is in use.
1. Place the Fountain Base on a smooth and level surface. Allow
enough space to access the pump. NOTE: Allow enough space
to access the pump during installation.
2. Remove the pump from its packaging and adjust the ow control
to the lowest setting to avoid splashing until the fountain is
completely assembled.
Alpine Quick Tip #1
Turn to the Right / Clockwise
to turn down the water ow.
Turn the adjuster to the Left /
Counter-Clockwise to turn up
the water ow.

5
ASSEMBLING & USING YOUR PRODUCT
3. Connect the vinyl tubing from the bottom of the Fountain Top to
the hose bib on the pump.
4. Now place the Fountain Top on to the Fountain Basin with the
pump at the bottom of the basin. The pump power cable should
t securely within the notch at the base of the Fountain Top.

6
ASSEMBLING & USING YOUR PRODUCT
5. Hang the Cups at the top of the Fountain on the hook below the
water spout. Insert a splash guard into each of the cups.
6. Gently pour water into the fountain basin, being careful not to
overow and cause splashing. Make sure the water completely
submerges the pump and the water runs clear during operation.
NOTE: We recommend that you use distilled water to prevent scale
build-up. It can take up to 5 minutes for the air to be completely
expelled and water begins to ow the rst time you operate the
pump.

7
ASSEMBLING & USING YOUR PRODUCT
7. Plug the pump cord into your local power supply. Make sure
that there is no water around the plug & always keep the power
source in a dry place. .
8. Now adjust the water pump to your  ow preference. (see Quick
Tip #1) Once set, replace the Fountain Top.
9. Congratulations, your fountain is now complete. Don’t forget to
add water regularly as water will evaporate over time.

8
REPLACEMENT PARTS
ALSO AVAILABLE FROM ALPINE
Country Fountain Care
Formula
Americana®
UV Acrylic
Sealer
Touch-Up
Paint Kit
USA PPL102 RRR106 RTD102
UK N/A N/A N/A
For parts or additional help with your new product, please contact
Alpine customer service.

9
TROUBLESHOOTING
For any questions or problems, contact the retail store the fountain
was purchased from.
If the pump fails to run
1. Check the circuit breaker or plug into a different outlet to be
sure the pump is receiving electrical power.
2. Check the pump discharge and tubing for any kinks and/or
obstructions.
3. Check for any buildup obstructing the water ow and ush it
with a garden hose.
4. Check the rotor by removing the front cover and plate to
access the impeller area, then turn the rotor to make sure that
it is not jammed or broken.
If the pump “spews”
• Check the water level to make sure the pump is completely
submerged and there is enough water in the basin to operate
the fountain. A lack of water causes the pump to spew.
If the pump is abnormally loud
1. Disconnect the pump from the electrical power supply and
remove the front cover and plate.
2. Carefully grip the impeller and gently pull the impeller/rotor
assembly out of the pump housing.
3. Rinse the impeller/rotor assembly and clean the cavity with
clean water. If breakage or damage is found, contact a local
retailer for parts.

10
CAUTION
• Always unplug the pump from the electrical outlet before
cleaning or handling.
• Use with clean water only. Do not place the fountain and/or
its parts in any other liquid.
• Periodically change the water and clean the pump to keep
it free of microorganisms.
• During freezing weather, or if the fountain will not be used
for an extended period, disconnect it and store it in a dry
place.
• Do not lift, carry, or pull the pump by the power cord.
• NEVER LET THE PUMP RUN DRY.

LIMITED WARRANTY INFORMATION
11
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof
of purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage, is considered
negligence, and will not be covered under this warranty. The use of “hard water,” and/or
caustic cleaners, can affect the painted or other nishes. Failure to keep the unit clean,
and use of such additives/cleaners, will also void the warranty. Please note: for fountains,
it is normal for some splashing to occur and protecting the immediate surfaces is not the
responsibility of Alpine Corporation.
Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up
using standard paint. The paint is designed to protect the entire nish against breakdown
of color. As with any product, all nishes with time will gradually fade and discolor. The
warranty will only cover against severe or complete fading, within the rst year from date
of purchase, with the above exclusion.
Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you
purchased the product. If that is not an option, you can contact Alpine Corporation at
www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to
show proof of purchase, provide photographs and any other information needed to
validate your claim. This may be necessary to distinguish between a partial or complete
replacement of a defective product. The warranty does not cover any items with multiple
parts; the warranty will ONLY cover the individual component of the unit/item that may be
defective. Replacement parts can be made available to a consumer through the original
selling party, or an approved parts retailer. If this is not an option, contact our customer
service department. Item is covered under one year limited warranty from the date
of purchase. When requesting replacement parts due to a warranty claim after 30
days of purchase, credit card information will be requested for shipping charges.
Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
6. Damages caused in Transit
7. Inadequate care and/or neglect
8. Environmental and/or natural elements
9. Immersion in water, unless specied
10. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modications have occurred. This includes any and/or all defects arising out
of freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim.

NOTES
12

Purchased your product online?
We would really appreciate it if you can share your experience
with others by reviewing our product on the website from which
you purchased.