Alpine 498-1 User manual

MOP AND BROOM HOLDER
INSTALLATION GUIDE
ITEM# 498-1

STEP 1 STEP 2
STEP 3 STEP 4
Insert The Holder Downward Installation finished
Take Out From Color Box
Wait 1 hour before moving
to step three
Remove the Back sticker
Firmly press sticker against
clean wall for 30 seconds

STEP 5 STEP 6
Pull the silicon out Push broom in to hold

NOTE
Never attempt to use as hand hold for climbing as it will not support your weight.
Do not install at eye level and in high-traffic areas to avoid potential collisions.
Do not install behind a door as the hooks may become damaged or damage a door.
Install the item out of childrens’ reach.
SPECIFICATIONS
Size:
3cm x 11.7cm x 5.2cm
(1.2in x 4.6in x 2in)
Weight:
36G (0.8 lbs)
Parts:
Anchor, One holder with two hooks
Alpineindustries Inc
27 Selvage St., Irvington, NJ 07111
Alpineindustries.com
1 [phone]
Recommended for indoor and outdoor use - select an area of a wall that
does not have electrical conduits or plumbing inside.
Thank you for purchasing the Alpine Industries Mop and Broom Holder, 1 holder and 2
hooks! This holder can secure handled-tools such as brooms, mops, etc. The silicone
holder allows them to be easily stored and removed quickly.