Altec Lansing CommStar SV6 User manual

© 2006 Altec Lansing Professional  1000 W. Wilshire Blvd., Suite 362  klahoma City, klahoma 73116
Phone: [phone]  Fax: [phone]  Email: [email protected]m
Revision 01 ct 2006
DPL™
CD
Player
Video
Display
MP3
Player
Microphone
SM1 Source Master
SV6
Powered Surface-Mount Speaker
FEA URES – THE ALTEC LANSING DIFFERENCE
• High-Definition 6.5” Duplex™ Speaker
• i-Amplified with Dual Channel Digital Power Amplifier
• DSP Processing Maximizes Performance
• Cat5 Plug+Play via DPL™ (patent pending)
• Adjustable Wall-Mount Included
• Volume Control
GENERAL PRODUC DESCRIP ION
Altec Lansing’s CommStar™ is an exciting alternative to
conventional 25/70/100V distributed sound systems. A typical
CommStar system consists of one or more power supplies
connected via Cat5 to high-fidelity powered speakers. The Cat5
carries low voltage power and digital audio to the speaker(s).
The SV6 Powered Surface-Mount Speaker starts with a powerful
20 oz. 6.5” woofer and 1” horn-loaded silk dome tweeter. A dual-
channel digital power amplifier drives the woofer and tweeter
with a dedicated channel for each. A powerful DSP engine
provides crossover, equalization, limiter protection, and digital-to-
analog conversion. The speaker and electronics are housed in
an attractive enclosure with adjustable wall-mount. A convenient
volume control is located on the ported baffle under the grille
assembly that can be easily removed when adjustments are
necessary. Standard Cat5 cable terminated with RJ45
connectors daisy chain to deliver supply voltage and digital audio
to each speaker. The easy-to-Install mounting system routes the
Cat5 cables out of sight within the wall-mount.
APPLICA IONS
The CommStar SV6 Powered Surface-Mount Speaker is
powered by the SM1 Source Master or the C1 Power Converter.
It is perfect for sound reinforcement and/or public address
needs. Meeting rooms, classrooms, waiting rooms, under-
balcony, and retail spaces are only the beginning for the
CommStar SV6 Powered Speaker plug-n-play solution.
GENERAL SPECIFICATIONS
Frequency Response 65 Hz – 18 kHz (+5 d )
Coverage 110 degrees nominal
Maximum SPL 107 d peak
Digital Power Link In/Out (DPL™)
Back Panel: interchangeable 2 x RJ45
Power On Indicator
Baffle Mounted: lue LED
Volume Control
Baffle Mounted: rotary shaft use flat-tip screwdriver
Connections standard Cat5 cable with RJ45 terminations
Power Supply-to-first Speaker <100 ft recommended
Speaker-to-Speaker <50 ft recommended
Model SV6W Matte White
SV6G Dark Gray
Dimensions 13.0” H x 8.5”W x 12.1” deep
303mm x 216mm x 307mm deep
Weight 9.5 pounds (4.3 kg) net weight
11.5 pounds (5.2 kg) shipping weight
Power Requirements SM1 Source Master
C1 Power Converter
Included Wall-mount

© 2006 Altec Lansing Professional  1000 W. Wilshire Blvd., Suite 362  klahoma City, klahoma 73116
Phone: [phone]  Fax: [phone]  Email: [email protected]m
Revision 01 ct 2006
100
95
90
85
80
75
20 50 100 200 500 1k 2k 5k 10k 20k
105
d -SPL
MusicPath Frequency Response: CV6 + SM1 Source Master Frequency Response: CV6 + C1 Power Converter
100
95
90
85
80
75
105
d -SPL
20 50 100 200 500 1k 2k 5k 10k 20k
ARCHI EC ’S AND ENGINEER’S SPECIFICA IONS
The loudspeaker system shall be a high fidelity type consisting of a 6.5 inch/165mm Duplex® loudspeaker component with 1 inch/25.4mm
high frequency soft-dome tweeter. A DSP processor providing electronic crossover and equalization shall be internal to the loudspeaker
enclosure. Also internal to the loudspeaker enclosure shall be a dual channel power amplifier. The signal input shall be AES-E U digital
audio delivered via standard Cat5 cable terminated with RJ45 connectors. The loudspeaker system shall have an operating bandwidth of 65
Hz - 18 kHz (+5 d ) and be capable of delivering 107 d peaks when measured at a distance of one meter. The loudspeaker shall have
nominal conical coverage angle of 110 degrees. The dimensions shall be 13 inches tall by 8.5 inches wide by 12.1 inches deep. The
loudspeaker system shall weigh 9.5 lbs./4.3 kg. The loudspeaker system shall be the Altec Lansing Professional model SV6.
Components and Accessories:
SM1
Source Master Accessories:
1RMK - Rack Kit
1RVC - Remote-Volume-Control
CAT5X258 - 8 x 25' CAT5 ca les
C1
Power Converter Accessories:
1RMK - Rack Kit
1RVC - Remote-Volume-Control
2CV6
Powered
Ceiling Speaker
(pair)
Accessories:
2DG1W - Industrial Grille (pair)
2RG1G - Regressed Grille (pair) dark gray
2RG1W - Regressed Grille (pair) white
6Pring - Plaster Ring (six per package)
SV6
Powered Speaker
(includes wall racket)
SV6G - dark gray
SV6W - white
Accessories:
1JMG - Ceiling Mount Bracket (dark gray)
1JMW - Ceiling Mount Bracket (white)
As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice.
VISIT WWW.ALTECPRO.COM FOR
• Specification sheets in .pdf format. Download page 1 of the specification sheet for your submittals.
• ne paragraph A&E Specifications in .doc format
Beamwidth
10
30
50
70
90
110
130
150
170
190
100 1000 10000
Frequency
Degrees