Altec Lansing The Jacket IMW455 User manual

Item # IMW455
Owner’s Manual

Introduction
Thank you for purchasing the Altec Lansing IMW455 Portable Wireless Bluetooth Speaker. You can use this
speaker to listen to audio wirelessly from devices such as smart phones, computers, iPods, tablets and most
other Bluetooth sound sources. Please read this manual carefully FIRST in order to get the most out of your
speaker.
Package Contents
1. IMW455 the Jacket Portable Wireless Bluetooth Speaker
2. Extra Skin
3. AC Adapter
4. 3.5mm Auxiliary Cable
5. Owner’s Manual with Warranty Information
Technical Specifications
-Weight: approximately 500g
- Battery Life: up to 8 hours at average 80 db
- AC Adaptor: 9V, 670mA
- Power Adapter Input Rating: 100~240V, ~50/60Hz, 0.15A

Charger Your Speaker
1. Connect one end of the included AC power adapter cable to the iMW455 DC input jack. Then plug the other
end of the AC adapter into a suitable power outlet to recharge your speaker’s internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately four hours to charge when completely
drained.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn off
when your unit is fully charged.
Understanding the LED Status Indicators
Power and Bluetooth Indicator Light
Blinking Blue LED = Bluetooth not connected. (Ready to pair.)
Solid Blue LED = Bluetooth connected.
Charging Indicator Lights
Solid Red LED = Charging
Red LED OFF = Charged Full.

Powering Your Speakers ON & OFF
1. Press and hold the “POWER” button for 2 seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly. Now you can ready to pair your audio source with your IMW455 speaker.
2. Press and hold the “POWER” button for 2 seconds to turn off the unit.
Power Saving Mode
The iMW455 will enter a power saving mode if no audio is played for 30 minutes. Press and hold power button
for two seconds to wake the iMW455.

Setting Up Your IMW455 Bluetooth Music Receiver
Bluetooth Device Compatibility
Your speaker connects with all Bluetooth devices that support the A2DP profile including iPads, iPhones, iPod
touches, and most smart phones, laptops and tablets.
Pairing a Bluetooth Device with Your Speaker
Press and hold the “POWER” button for two seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly. Now you are ready to pair your device with your iMW455 speaker.
1. Go to the Bluetooth Manager of your Bluetooth device.
2. Search Bluetooth devices and select “iMW455” to start connecting.
3. Enter “0000” if your device asks for the PIN code.
4. Once paired, the unit will beep and the Blue LED light will turn on steadily.
5. Although the unit can only stream audio from one device at a time, it is capable of being paired with up to
eight devices. This means that you only have to enter the PIN code one time for each device.
Connecting a Paired Bluetooth Device
1. You should only need to pair your Bluetooth device with your speaker one time.
2. The next time your Bluetooth device and the unit are in range of each other, and the Bluetooth feature is
turned on, they should automatically connect.
3. The unit will only automatically connect to the last Bluetooth device it was connected to.
4. If your paired device does not automatically connect, navigate to the Bluetooth menu on your device and
select “iMW455” from the list.
Note: Your iMW455 can pair with and remember multiple Bluetooth devices; however it can only connect with
one device at a time. For more detailed instructions, please visit the FAQ section.

Playing Audio from Your Bluetooth Device
1. Once your media device is connected to the unit, simply start playing the music, movie or game and all the
audio will automatically be played through iMW455.
2. Press “POWER” to play/pause the audio.
3. Press + or - to adjust the volume level of the unit.
4. Keep in mind that the iMW455 has a 30 foot Bluetooth wireless range.
Note: The volume controls on your media device work separately from the volume controls on iMW455.
When there is an incoming call:
1. Press “POWER” to pick up the call.
2. Press and hold “POWER” to reject the call.
3. During a call: Press “POWER” again to hang up the call.
To Disconnect Your Bluetooth Device
Turn off the connected device or press Volume “+” and “-“at same time to disconnect the Bluetooth device.
*The Blue Bluetooth indicator flashes slowly after disconnect the device.
Reconnecting Your Device
If you move out of range or turn off the Bluetooth feature on your device, the unit will disconnect from your
device. To reconnect, simply access the Bluetooth Manager on your device and select iMW455.
You will not be asked to enter the PIN code again. or press Volume “+” and “-“ at same time to reconnect the
Bluetooth device.
Out of Range or Lost Signal
If the music device is out of range (beyond 30 feet) of the unit or if there is something blocking the Bluetooth
signal, the LED light will flash slowly to indicate that the Bluetooth connection with the music device has been
lost.

To avoid a lost connection:
1. Move the music device back into range (within 30 feet), and/or make sure there’s a clear line of sight
between the unit and the Bluetooth device.
2. If the connection is lost, the connection will need to be reestablished. Follow the directions under
“Reconnecting Your Device”.

FAQ: Frequently Asked Questions
1. I am having Bluetooth pairing or connection problems, what do I do?
A.) Make sure your Bluetooth device is turned on and is on the discoverable mode.(blinking blue light denotes
that the speaker is ready to accept connections)
B.) Make sure your speaker is not already connected with another device (easiest way to determine this is if
you see a steady blue light in the center of the speaker).
C.)If you want to connect with another device , disconnect (you don’t need to unpair) the previously connected
device (you will see the solid blue light in the center of the speaker change to a blinking blue pattern - it’s now
ready to accept connections) and try pairing again.
D.) If you had already paired your device and connection was successful prior but now your connection is
failing or getting a connection error, unpair /forget device (for IOS devices) from your phone or mp3 player and
pair again. Now try to connect.
E.) If you are pairing the first device to the speaker, after you turn on the speaker and when you see a steady
blinking blue light , select iMW455 from the list of discovered Bluetooth devices to pair. If prompted for a
password/pass code enter “0000”.
F.) When you are turning ON the speaker for the first time it automatically tries to connect to the last paired
device, if it cannot find the last paired device and you have paired multiple devices it will try to establish
connection with the previously paired devices. If none of the paired devices are available to connect it will turn
to a discoverable mode and this can take from 5 to 90 seconds (depending upon the number of previously
paired devices and their operating system). If you are trying to establish a connection during this time you will
receive an error. Kindly wait for approximately 90 seconds, scan your MP3 player or phone to discover new
devices in the Bluetooth manager screen of your device and select iMW455 from that list to pair. If prompted
for a password/pass code enter “0000”.
G.) For android devices after unpairing the speaker it may show up on the available devices. This could
happen even if the speaker is turned OFF. If you trying to pair again – please make sure your speaker is
turned ON (We recommend having your android device close to the speaker), wait for few seconds till you see
the blue light blinking (center front of the speaker) and allow 90 seconds for the speaker to establish that no

other device is available for connection. Turn on Bluetooth on your phone/player. Click on “Scan” for Bluetooth
devices from your phone/player to discover iMW455.Now click on iMW455 to connect.
H.) Please note this speaker can be paired with up to 8 devices and will establish automatic connection to
these devices. If you’re trying to pair with more than 8 devices, it will pair but you may have issues connecting
to the initially paired devices. Please unpair / forget device (for IOS devices) and pair again the device you
wish to add and establish connection.
2. My Speaker does not turn ON, what do I do?
A) Please make sure you have charged your speakers. A steady red light in the center of the speaker means
that the speaker is charging. Blinking red light means low power. We recommend you charge for a minimum of
4 hours after each usage.
3. How do I extend my battery life?
A.)The battery life is usually 8 hours at moderate listening levels (50% volume). To ensure you get the
maximum out of the battery we recommend that you fully charge your speaker before using. We also
recommend that you use only the provided power supply unit that came in the box.
4. How do I pause my music or advance to the next or previous track?
A.) You must use your Bluetooth audio source, i.e. MP3 player, smart phone, tablet, etc. in order to control the
track being played.

Warning
When using your speaker please follow these important safety precautions:
1) DO NOT use this product near or in water.
2) DO NOT use this product outdoors when it’s raining.
3) DO NOT clean with a wet cloth.
4) DO NOT USE the product near a heat source or expose to direct sunlight for an extended period of
time.
5) Use only the approved power supply unit provided in the box.
6) DO NOT leave the product plugged to the main AC power when not used for an extended period of
time.
7) Make sure the product is near a main power supply outlet and you can access the power breaker
switch.
WARNING: To reduce the risk of fire or electrical shock, do not expose this device to rain or moisture or place
it near a heat source.
Technical Support
For technical support issues please visit our website at www.alteclansing.com. You can find manuals,
software and FAQ’s at the website. Can’t find what you are looking for? Fill out an online ticket and one of our
technical support team members will answer questions or call 1-855-292-4087 to access our technical support
information on the phone.