Altek AICAMX2 User manual
p1
Altek AI Camera
Quick Start
p2
Product Specifications
•Model name: AICAMX2
•Sensor: 1/1.8“ CMOS
•Max resolution: 8MP
•Operating temperature: -˚C ~ 4 ˚C
•Focal Length: 4mm
•F number: F1.8
•USB: Type C (DC in only)
p3
Parts and Controls
p4
Before start
•Register account at https://azure.microsoft.com/
•Log in by your azure account to Azure portal.
•Choose + Create a resource, then choose Internet of Things.
Then, create your own Iot hub and Iot Edge
(Refer to https://docs.microsoft.com/en-us/azure/iot-fundamentals/ for detail)
•Choose + Create a resource, then choose Internet of Things.
Then, create your own Iot hub and Iot Edge
•Copy the value of either Connection string—primary key or Connection string—
secondary key to a notepad that you will use later.
A connection string looks like
HostName=xxxxxxxxxx.azure-
devices.net;DeviceId=xxxxxxxxxxxx;SharedAccessKey=xxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxx
p5
Add iot edge device at Azure cloud
p6
Select your device
, and set module
p7
Add Iot Edge module
p8
Setup for vison module
•codes snippet in Container Create Options
{
"HostConfig": {
"Binds": [
"/data/misc/camera:/app/vam_model_folder"
],
"NetworkMode": "host"
},
"NetworkingConfig": {
"EndpointsConfig": {
"host": {}
}
}
}
•Press Save one aove ready
p9
Click Configure advanced Edge Runtime settings button at the
bottom and add this line "User": "root", in Create Options.
Then, press save and next
p10
Submit your setting
p11
Get connection string from azure cloud first.
Then, input connection string by OOBE process to device
p12
OOBE by webpage -1
•Connect device with PC via Wi-Fi
You can check your SSID and password at
bottom of device
( Default password is 12345678 if there is no
label at bottom)
•URL: setaicamera.ms
p13
OOBE by webpage -2
•Press next directly at 1st page if you dont
want change device wi-fi password and
ssh account
•Scan and select available wi-fi ap for
internet access
p14
OOBE by webpage -3
•Input your connect string at webpage
p15
Connection to Iot Edge
•After OOBE, wait for connection confirmation feedback from web site
once edgeAgent is run
•You can check by below adb shell cmd
–docker ps
•Device will automatically run Iot Edge next boot-up no matter internet is
available or not
p16
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules These limits are designed
to provide reasonable protection against harmful interference in a residential installation This equipment generates, uses a
nd can radiate radio frequency
energy and, if not installed and used in accordance with th
e instructions, may cause harmful interference to radio communications However, there is no
guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to
radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
-Consult the dealer or an experienced radio/ TV technician for help
CAUTION:
Any changes or modifications not expressly approv
ed by the grantee of this device could void the user's authority to operate the equipment
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves This device is designed and manufactured not to exceed the
emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U S Government
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR The SAR limit set by the FCC is 1 6
W/kg Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power
level in different channels
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines SAR information on this device is on file with the FCC and can be found under the Display Grant section of
www fcc gov/eot/ea/fccid after searching on FCC ID: ACQ9-1688000
To ensure that RF exposure levels remain at or below the tested levels, use a belt-clip, holster, or similar accessory that maintains a minimum
separation distance of 5mm between your body and the device
Table of contents
