Altelix BMP-RKU1 User manual

BMP-RKU1
Installation Guide
Altelix LLC USA: 866-660-WIFI (9434) International: [phone] [email protected] www.altelix.com
Copyright (C) 2023 Altelix LLC. All rights reserved. Altelix and the Altelix logo are Trademarks and/or Registered Trademarks of Altelix LLC.
Specifications are subject to change without notice. See www.altelix.com for most current information
Roku® is a trademark or registered trademark of Roku, Inc.
IS0199 Rev A 06/23/23

BMP-RKU1 Installation Guide
The BMP-RKU1 can be mounted either directly to the back of a television or
inside a media cabinet using the included double-sided tape. For wall
mounting, wall anchors and screws are also provided.
Double Sided Tape
(Optional Step) For installations subject to
vibrations, an optional hook and loop strap is
provided to secure the Roku in the mounting
cradle.
Wall Anchors and Screw
To use the included double-sided tape,
firmly attach to the rear of the BMP-RKU1
as shown.
For wall mounting use the drill template
below.
Once the BMP-RKU1 is mounted, insert
the Apple TV into the cradle as shown.
Hook and Loop Strap
Drill Template for Mounting Holes
Place the template in the desired
mounting location and mark the holes.
Follow all applicable safety precautions
when drilling. If necessary, drill pilot holes
where you made your mark. If you will be
using the wall anchors provided with your
enclosure drill 3/16 inch holes. If you will be
using the screws directly, drill 3/32 inch
holes.
Printing Instructions
Print onto 8-1/2” x 11” paper. Select
“Actual Size” or “100% Scale” when
printing.
IS0199 Rev A 06/23/23
Installation Note: If attaching to surfaces such as glass, mirror and tile, be sure to clean
surfaces first with alcohol wipes or glass cleaner