Altelix NHBS-RACK-6U User manual

IS0188 Rev A 04/15/22
Altelix LLC USA: 866-660-WIFI (9434) International: [phone] [e-mail] www.altelix.com
Copyright(C) 2022 AltelixLLC. Allrights reserved. Altelixandthe Altelixlogo areTrademarks and/orRegisteredTrademarks of Altelix LLC.
Specificationsare subjectto changewithout notice. See www.altelix.comfor mostcurrent information
Assembly Guide
NHBS-RACK-6U
Page-4
WARNING: READ ALL INSTRUCTIONS BEFORE USE.
Assembling the Equipment Rack
The NHBS-RACK-6U requires assembly before being installed. The following
components are included:
(1) Equipment Rack Back Panel with Hinged Side Panels
(2) Adjustable Side Panels
(12) #M5 Assembly Screws and Nuts
(12) #10-32 Equipment Mounting Screws
(4) Wood Screws
(2) Concrete Anchors .
Equipment shown for reference, not included.
Step 4:
Adjust the side panels to the depth required for equipment
being installed into the rack. Panel depth: 9.5” min. / 15.5” max.
NHBS-RACK-6U Assembly
9.5” to 15.5”
Step 5:
Install the rack in the required location. Wood screws and concrete
anchors are provided in the hardware kit. #10-32 screws are
provided for securing equipment mounted in rack.
Got Questions?
We are here to help.
Contact us at:
[e-mail]
USA & Canada: 866-660-9434
International: [phone]

Page-2 Page-3
NHBS-RACK-6U Assembly
Step 2:
Using supplied M5 hardware, secure the side panels in place.
#M5 Screws
Step 1:
Unfold side panels into place as shown.
NHBS-RACK-6U Assembly
Step 3:
Using supplied M5 hardware, attach the (2) adjustable panels as shown.
Adjustable Panels
#M5 Screws
#M5 Screws